TFC - HTF1 = Inside Bar
2 = Breaks one side of the previous bar
3 = Breaks both sides of the previous bar
2up Green = Current bar breaks previous bar's high and it is a green bar
2up Red = Current bar breaks previous bar's high but it is a red bar
2Down Green = Current bar breaks previous bar's low but it is a green bar
2Down Red = Current bar breaks previous bar's low and it is a red bar
Inside Green = Current bar is an inside bar (1) and it is a green bar
Inside Red = Current bar is an inside bar (1) and it is a red bar
Outside Green = Current bar is an outside bar (3) and it is a green bar
Outside Red = Current bar is an outside bar (3) and it is red bar
Looking for above setups on Daily, Weekly, Monthly, 3Month, Year
Only higher timeframe data shows up
e.g. If the chart timeframe is 1D or less, all of the above timeframe analysis will appear
If the chart timeframe is 1Month, only 1M, 3M and Yearly analysis will show up
Please DM me for access
Thestrat
TFC - LTF1 = Inside Bar
2 = Breaks one side of the previous bar
3 = Breaks both sides of the previous bar
2up Green = Current bar breaks previous bar's high and it is a green bar
2up Red = Current bar breaks previous bar's high but it is a red bar
2Down Green = Current bar breaks previous bar's low but it is a green bar
2Down Red = Current bar breaks previous bar's low and it is a red bar
Inside Green = Current bar is an inside bar (1) and it is a green bar
Inside Red = Current bar is an inside bar (1) and it is a red bar
Outside Green = Current bar is an outside bar (3) and it is a green bar
Outside Red = Current bar is an outside bar (3) and it is red bar
Looking for above setups on 15 Minutes, 30 Minutes, 1 Hour, 2 Hour and 4 Hours
Only higher timeframe data shows up
e.g. If the chart timeframe is M15 or less, all of the above timeframe analysis will appear
If the chart timeframe is H1, only H1, H2 and H4 analysis will show up
Please DM me for access
TheStratHelper - Watchlist MakerEnter 13 symbols of your choice in the input tab. By default some symbols are already entered.
2 Up = Current bar higher than the previous bar.
2 Down = Current bar lower than the previous bar.
Scanning for 2 Up or 2 Down on monthly, weekly and daily timeframes.
2up In Force Only = If the current price is still above the last bar.
E.g. of how I use this..If a symbol is 2Up on Monthly, then I want to know if it's 2Up on Weekly. Then I can look for a trade opportunity on 1D.
If a symbol is 2up on monthly, weekly and daily, then I look for a trade opportunity on intraday timeframe.
IMPORTANT: Scans will show the correct results ONLY IF the chart timeframe is 1D or less.
Please DM me to find out how to get access.
Previous Highs & LowsPlots highs and lows for yesterday, last week and last month.
You can see all of them in the intraday tf. If weekly tf is selected, yesterday's daily high and low won't be plotted and if monthly tf is selected, weekly and daily highs and lows won't be plotted.
Strat Signal Scanner (5/15/30/60/D) Highlight Add-onStrat Signal Scanner (5/15/30/60/D) - Part 1 Highlight Add-on with Outside Bar Warning Indicator Info
Must be used with the “Strat Signal Scanner (5/15/30/60/D) - Part 1” Indicator only.
Two functions:
1. Add’s the current Candle color to each Timeframe box (Green or Red).
2. Possible Outside Bar Warning when a 2 Bar appears to be failing (Amber Box).
Amber Box - Outside Bar Warning Trigger Conditions:
- a 2UP Red Bar falls >60%* of previous candles range (High to Low).
- a 2DOWN Green Bar rises >60%* of previous candles range (Low to High).
*Customise previous candles range % within Indicator settings.
How to use:
- Add Indicator to chart
- click More (3 dots next to indicator settings)
- click Move - Exisiting pane above.
- Move the Highlight Indicator to line up with the Part 1 Indicator and make sure its in the background to prevent blocking the Part 1 indicator boxes.
- Open Highlight Indicator settings to adjust % if required.
Strat Signal Scanner (60/D/W/M/Q) Highlight Add-onStrat Signal Scanner (60/D/W/M/Q) - Part 1 Highlight Add-on with Outside Bar Warning Indicator Info
Must be used with the “Strat Signal Scanner (60/D/W/M/Q) - Part 1” Indicator only.
Two functions:
1. Add’s the current Candle color to each Timeframe box (Green or Red).
2. Possible Outside Bar Warning when a 2 Bar appears to be failing (Amber Box).
Amber Box - Outside Bar Warning Trigger Conditions:
a 2UP Red Bar falls >60%* of previous candles range (High to Low).
a 2DOWN Green Bar rises >60%* of previous candles range (Low to High).
*Customise previous candles range % within Indicator settings.
How to use:
- Add Indicator to chart
- click More (3 dots next to indicator settings)
- click Move - Exisiting pane above.
- Move the Highlight Indicator to line up with the Part 1 Indicator and make sure its in the background to prevent blocking the Part 1 indicator boxes.
- Open Highlight Indicator settings to adjust % if required.
Inside/Outside Scanner40 tickers max. Can change the tickers in the settings.
Choose to scan for Inside or Outside bars for current bar or previous bar.
Also scans for 2 inside consecutive bars and 3 inside bars starting from the current candle.
Change timeframe in the settings. Default is set to 1D.
Please DM me to get access.
TheStratHelper Scanner
1= Inside Candle
2= Goes past the previous candle's price up or down
3= Goes past the previous candle's price on both sides
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40. By default some symbols are entered in the indicator already. They cannot be left empty. If left empty, an error comes up and the script doesn't load.
Can look through many timeframes like monthly, weekly, daily by changing the timeframe in the input tab under settings. Default timeframe is set to 1 Day.
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan.
Scanning for
2 Up, 2 Down, 3-1, 2-1, 1-2, 2-2, Failed 2 going 3, Inside and Outside bars
Please DM me to get access to this indicator.
TheStrat MTF High/LowI just started learning about #TheStrat by Rob Smith. I created this tool as it helps me see the bigger TFs over my short TF periods. It plots the Highs and Lows of the current and past Quarter, Month, Week, Day, 6hour, and 1hour. (I added the 6 hour for myself for use with cryptos which run 24 hours). It leaves the previous Highs/Lows plotted as well so you can see how the candles are moving within the bigger candlestick . Example, if you select the 15 minute candlestick , it will also list the current high/low for the 1h, 6h, D, W, M, and Q.
It has customization that will disable whatever TF's you are not interested in.
It has auto-detect and disable lower TFs that are less than or equal to the current selected TF. This function will only work to disable when one of the above mentioned periods is selected. Example, if you select the M candle, it will disable the M, W, D, 6h, and 1h. Only the bigger TF of the Q will be visible. Example of when function wont work, if you selected the 2 Month candle it will not disable any of the TFs.
I am open to any ideas that you experienced Stratters offer. As soon as I get better at the system and generate some income for myself, I will likely make it open source. Hope this helps.
Strat Signal Setup Scanner (5/15/30/60/D) - Part 3
** PLEASE READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
This scanner is Part 3 only. Please use with Strat Signal Scanner's (5/15/30/60/D) Part 1 and 2 for full function.
A demo video of this indicator is available:
Change indicators label color’s and adjust scanner window as required.
Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1/2/3 version is also available.
Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1, 2 and 3 features:
Strat Signal Scanner - Part 1 - (The Current bar’s condition with Hammer / Shooting Star combos if identified)
Inside Bar
2UP
2DOWN
Outside Bar
Shooting Star (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Hammer (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Shooter-Hammer (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Hammer-Shooter (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Strat Signal Setup Scanner - Part 2 - (Previous Bar + Current bar to identify setups)
2U-1
2D-1
3-1
1-2U
1-2D
1-3
3-2U
3-2D
Strat Signal Setup Scanner - Part 3 - (Previous two bars + Current bar to identify setups)
3-1-2U
3-1-2D
2U-1-2U
2D-1-2D
2U-1-2D
2D-1-2U
1-2U-2D
1-2D-2U
How to use the Strat Signal and Setup Scanner?
Open the 3 indicators in order starting with Part 1, Part 2 then Part 3. That way the scanner headings (5/15/30/60/D) will line up with the setups signals.
IMPORTANT: For the scan to work across ALL Timeframe Groups (5/15/30/60/D) successfully you must open a 5min chart on the stock you want to scan.
Once the scan results are displayed with the 5min chart open you can then click on a 15/30/60/D chart to see the setups. But do not pay attention to the new lower timeframe scan results when you have a higher timeframe chart open as they will be incorrect.
For an example: a Successful (5/15/30/60/D) Scan = after you open a 5min chart only. If you open the 15min chart the (15/30/60/D) scan results will be correct but the 5min scan results will be incorrect. If you open the 30min chart the (30/60/D) results will be correct but the 5 and 15 scan results will be incorrect always go back to the 5min chart to correct. This anomaly if due to a historical data issue with pine script.
How to change the Scanner Labels and Text Color’s?
Color’s changed within the Indicator Settings. After you choose your color's on the 'Inputs' page make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
How to create an Alert?
With a 1HR chart open click on Add Alert.
Change Condition to Strat Signal Scanner Part 1, Part or Part 3
Now select signal/setup in drop down box below example: ‘Inside 60’
Click Create
A Warning will appear, click ‘Continue anyway’. An alert is now set.
Strat Signal Setup Scanner (5/15/30/60/D) - Part 2
** PLEASE READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
This scanner is Part 2 only. Please use with Strat Signal Setup Scanner's (5/15/30/60/D) Part 1 and 3 for full function.
A demo video of this indicator is available:
Change indicators label color’s and adjust scanner window as required.
Strat Signal and Setup Scanner (60/D/W/M/Q) - Part 1/2/3 version is also available.
Strat Signal and Setup Scanner (60/D/W/M/Q) - Part 1, 2 and 3 features:
Strat Signal Scanner - Part 1 - (The Current bar’s condition with Hammer / Shooting Star combos if identified)
Inside Bar
2UP
2DOWN
Outside Bar
Shooting Star (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Hammer (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Shooter-Hammer (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Hammer-Shooter (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Strat Signal Setup Scanner - Part 2 - (Previous Bar + Current bar to identify setups)
2U-1
2D-1
3-1
1-2U
1-2D
1-3
3-2U
3-2D
Strat Signal Setup Scanner - Part 3 - (Previous two bars + Current bar to identify setups)
3-1-2U
3-1-2D
2U-1-2U
2D-1-2D
2U-1-2D
2D-1-2U
1-2U-2D
1-2D-2U
How to use the Strat Signal and Setup Scanner?
Open the 3 indicators in order starting with Part 1, Part 2 then Part 3. That way the scanner headings (5/15/30/60/D) will line up with the setups signals.
IMPORTANT: For the scan to work across ALL Timeframe Groups (5/15/30/60/D) successfully you must open a 5min chart on the stock you want to scan.
Once the scan results are displayed with the 5min chart open you can then click on a 15/30/60/D chart to see the setups. But do not pay attention to the new lower timeframe scan results when you have a higher timeframe chart open as they will be incorrect.
For an example: a Successful (5/15/30/60/D) Scan = after you open a 5min chart only. If you open the 15min chart the (15/30/60/D) scan results will be correct but the 5min scan results will be incorrect. If you open the 30min chart the (30/60/D) results will be correct but the 5 and 15 scan results will be incorrect always go back to the 5min chart to correct. This anomaly if due to a historical data issue with pine script.
How to change the Scanner Labels and Text Color’s?
Color’s changed within the Indicator Settings. After you choose your color's on the 'Inputs' page make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
How to create an Alert?
With a 1HR chart open click on Add Alert.
Change Condition to Strat Signal Scanner Part 1, Part or Part 3
Now select signal/setup in drop down box below example: ‘Inside 60’
Click Create
A Warning will appear, click ‘Continue anyway’. An alert is now set.
Strat Signal Scanner (5/15/30/60/D) - Part 1
** PLEASE READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
This scanner is Part 1 only. Please use with Strat Signal Scanner's (5/15/30/60/D) Part 2 and 3 for full function.
A demo video of this indicator is available:
Change indicators label color’s and adjust scanner window as required.
Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1/2/3 version is also available.
Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1, 2 and 3 features:
Strat Signal Scanner - Part 1 - (The Current bar’s condition with Hammer / Shooting Star combos if identified)
Inside Bar
2UP
2DOWN
Outside Bar
Shooting Star (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Hammer (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Shooter-Hammer (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Hammer-Shooter (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Strat Signal Setup Scanner - Part 2 - (Previous Bar + Current bar to identify setups)
2U-1
2D-1
3-1
1-2U
1-2D
1-3
3-2U
3-2D
Strat Signal Setup Scanner - Part 3 - (Previous two bars + Current bar to identify setups)
3-1-2U
3-1-2D
2U-1-2U
2D-1-2D
2U-1-2D
2D-1-2U
1-2U-2D
1-2D-2U
How to use the Strat Signal and Setup Scanner?
Open the 3 indicators in order starting with Part 1, Part 2 then Part 3. That way the scanner headings (5/15/30/60/D) will line up with the setups signals.
IMPORTANT: For the scan to work across ALL Timeframe Groups (5/15/30/60/D) successfully you must open a 5min chart on the stock you want to scan.
Once the scan results are displayed with the 5min chart open you can then click on a 15/30/60/D chart to see the setups. But do not pay attention to the new lower timeframe scan results when you have a higher timeframe chart open as they will be incorrect.
For an example: a Successful (5/15/30/60/D) Scan = after you open a 5min chart only. If you open the 15min chart the (15/30/60/D) scan results will be correct but the 5min scan results will be incorrect. If you open the 30min chart the (30/60/D) results will be correct but the 5 and 15 scan results will be incorrect always go back to the 5min chart to correct. This anomaly if due to a historical data issue with pine script.
How to change the Scanner Labels and Text Color’s?
Color’s changed within the Indicator Settings. After you choose your color's on the 'Inputs' page make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
How to create an Alert?
With a 1HR chart open click on Add Alert.
Change Condition to Strat Signal Scanner Part 1, Part or Part 3
Now select signal/setup in drop down box below example: ‘Inside 60’
Click Create
A Warning will appear, click ‘Continue anyway’. An alert is now set.
Strat Signal Setup Scanner (60/D/W/M/Q) - Part 3** PLEASE READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
This scanner is Part 3 only. Please use with Strat Signal Scanner's (60/D/W/M/Q) Part 1 and 2 for full function.
A demo video of this indicator is available:
Change indicators label color’s and adjust scanner window as required.
Intraday Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1/2/3 version is also available.
Strat Signal and Setup Scanner (60/D/W/M/Q) - Part 1, 2 and 3 features:
Strat Signal Scanner - Part 1 - (The Current bar’s condition with Hammer/Shooting Star combos if identified)
Inside Bar
2UP
2DOWN
Outside Bar
Shooting Star (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Hammer (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Shooter-Hammer (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Hammer-Shooter (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Strat Signal Setup Scanner - Part 2 - (Previous Bar + Current bar to identify setups)
2U-1
2D-1
3-1
1-2U
1-2D
1-3
3-2U
3-2D
Strat Signal Setup Scanner - Part 3 - (Previous two bars + Current bar to identify setups)
3-1-2U
3-1-2D
2U-1-2U
2D-1-2D
2U-1-2D
2D-1-2U
1-2U-2D
1-2D-2U
How to use the Strat Signal and Setup Scanner?
Open the 3 indicators in order starting with Part 1, Part 2 then Part 3. That way the scanner headings (60/D/W/M/Q) will line up with the setups signals.
IMPORTANT: For the scan to work across ALL Timeframe Groups (60/D/W/M/Q) successfully you must open a 1HR (60min) chart on the stock you want to scan.
Once the scan results are displayed with the 1HR chart open you can then click on a Daily, Weekly, Monthly or Quarter chart to see the setups. But do not pay attention to the new lower timeframe scan results when you have a higher timeframe chart open as they will be incorrect.
For an example: a Successful (60/D/W/M/Q) Scan = after you open a 1HR chart only. If you open the Daily chart the (D/W/M/Q) scan results will be correct but the 60 scan results will be incorrect. If you open the Weekly chart the (W/M/Q) results will be correct but the 60 and Daily scan results will be incorrect always go back to the 1HR chart to correct. This anomaly if due to a historical data issue with pine script.
How to change the Scanner Labels and Text Color’s?
Color’s changed within the Indicator Settings. After you choose your color's on the 'Inputs' page make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
How to create an Alert?
With a 1HR chart open click on Add Alert.
Change Condition to Strat Signal Scanner Part 1, Part or Part 3
Now select signal/setup in drop down box below example: ‘Inside 60’
Click Create
A Warning will appear now click ‘Continue anyway’. An alert is now set.
Strat Signal Setup Scanner (60/D/W/M/Q) - Part 2** PLEASE READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
This scanner is Part 2 only. Please use with Strat Signal Scanner's (60/D/W/M/Q) Part 1 and 3 for full function.
A demo video of this indicator is available:
Change indicators label color’s and adjust scanner window as required.
Intraday Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1/2/3 version is also available.
Strat Signal and Setup Scanner (60/D/W/M/Q) - Part 1, 2 and 3 features:
Strat Signal Scanner - Part 1 - (The Current bar’s condition with Hammer/Shooting Star combos if identified)
Inside Bar
2UP
2DOWN
Outside Bar
Shooting Star (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Hammer (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Shooter-Hammer (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Hammer-Shooter (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Strat Signal Setup Scanner - Part 2 - (Previous Bar + Current bar to identify setups)
2U-1
2D-1
3-1
1-2U
1-2D
1-3
3-2U
3-2D
Strat Signal Setup Scanner - Part 3 - (Previous two bars + Current bar to identify setups)
3-1-2U
3-1-2D
2U-1-2U
2D-1-2D
2U-1-2D
2D-1-2U
1-2U-2D
1-2D-2U
How to use the Strat Signal and Setup Scanner?
Open the 3 indicators in order starting with Part 1, Part 2 then Part 3. That way the scanner headings (60/D/W/M/Q) will line up with the setups signals.
IMPORTANT: For the scan to work across ALL Timeframe Groups (60/D/W/M/Q) successfully you must open a 1HR (60min) chart on the stock you want to scan.
Once the scan results are displayed with the 1HR chart open you can then click on a Daily, Weekly, Monthly or Quarter chart to see the setups. But do not pay attention to the new lower timeframe scan results when you have a higher timeframe chart open as they will be incorrect.
For an example: a Successful (60/D/W/M/Q) Scan = after you open a 1HR chart only. If you open the Daily chart the (D/W/M/Q) scan results will be correct but the 60 scan results will be incorrect. If you open the Weekly chart the (W/M/Q) results will be correct but the 60 and Daily scan results will be incorrect always go back to the 1HR chart to correct. This anomaly if due to a historical data issue with pine script.
How to change the Scanner Labels and Text Color’s?
Color’s changed within the Indicator Settings. After you choose your color's on the 'Inputs' page make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
How to create an Alert?
With a 1HR chart open click on Add Alert.
Change Condition to Strat Signal Scanner Part 1, Part or Part 3
Now select signal/setup in drop down box below example: ‘Inside 60’
Click Create
A Warning will appear now click ‘Continue anyway’. An alert is now set.
Strat Signal Scanner (60/D/W/M/Q) - Part 1** PLEASE READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
This scanner is Part 1 only. Please use with Strat Signal Scanner's (60/D/W/M/Q) Part 2 and 3 for full function.
A demo video of this indicator is available:
Change indicators label color’s and adjust scanner window as required.
Intraday Strat Signal and Setup Scanner (5/15/30/60/D) - Part 1/2/3 version is also available.
Strat Signal and Setup Scanner (60/D/W/M/Q) - Part 1, 2 and 3 features:
Strat Signal Scanner - Part 1 - (The Current bar’s condition with Hammer/Shooting Star combos if identified)
Inside Bar
2UP
2DOWN
Outside Bar
Shooting Star (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Hammer (signal will trigger when candle is forming live not after the candle has closed allowing you to prepare)
Shooter-Hammer (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Hammer-Shooter (signal will trigger when pattern is forming live AND after both the Shooter and Hammer candles have closed giving you the new bar to action)
Strat Signal Setup Scanner - Part 2 - (Previous Bar + Current bar to identify setups)
2U-1
2D-1
3-1
1-2U
1-2D
1-3
3-2U
3-2D
Strat Signal Setup Scanner - Part 3 - (Previous two bars + Current bar to identify setups)
3-1-2U
3-1-2D
2U-1-2U
2D-1-2D
2U-1-2D
2D-1-2U
1-2U-2D
1-2D-2U
How to use the Strat Signal and Setup Scanner?
Open the 3 indicators in order starting with Part 1, Part 2 then Part 3. That way the scanner headings (60/D/W/M/Q) will line up with the setups signals.
IMPORTANT: For the scan to work across ALL Timeframe Groups (60/D/W/M/Q) successfully you must open a 1HR (60min) chart on the stock you want to scan.
Once the scan results are displayed with the 1HR chart open you can then click on a Daily, Weekly, Monthly or Quarter chart to see the setups. But do not pay attention to the new lower timeframe scan results when you have a higher timeframe chart open as they will be incorrect.
For an example: a Successful (60/D/W/M/Q) Scan = after you open a 1HR chart only. If you open the Daily chart the (D/W/M/Q) scan results will be correct but the 60 scan results will be incorrect. If you open the Weekly chart the (W/M/Q) results will be correct but the 60 and Daily scan results will be incorrect always go back to the 1HR chart to correct. This anomaly if due to a historical data issue with pine script.
How to change the Scanner Labels and Text Color’s?
Color’s changed within the Indicator Settings. After you choose your color's on the 'Inputs' page make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
How to create an Alert?
With a 1HR chart open click on Add Alert.
Change Condition to Strat Signal Scanner Part 1, Part or Part 3
Now select signal/setup in drop down box below example: ‘Inside 60’
Click Create
A Warning will appear now click ‘Continue anyway’. An alert is now set.
Strat Candles+Open Levels+Active FTFC** YOU MUST READ BEFORE USING THIS INDICATOR **
This indicator is strictly for helping people like myself learn 'The Strat' method by Rob Smith. This indicator DOES NOT provide trading advice or trade entry signals!
Strat Candles+Open Levels+Active FTFC Indicator features :
Strat Candles Scenarios 1, 2 and 3.
Open Price Levels for the 1min/5min/15/30/60/4HR/12HR/D/W/M/Q/Y
Active FTFC (Full Timeframe Continuity) Function.
How to use Active FTFC:
After you have added the indicator to your chart you must open the Indicator Settings. Select your Active FTFC Timeframe Group and Select your Candle Body Color for Bullish FTFC and Bearish FTFC. When FTFC is Active the candle body will change color when all FTFC conditions have been met across your selected Timeframes.
For Active FTFC to work successfully only open the FIRST Timeframe chart listed within your selected group!
If you select other Timeframes within your selected group Active FTFC results will be invalid. Example: If you have ticked and selected 'Active FTFC 60/D/W/M' you must only use the Active FTFC function on a 60min chart. If you then open a Daily chart the Active FTFC will not work correctly go back to the 60min chart.
Please note this function only works on the current live candle not previous historical candles on the chart. Feel free to use Trading View's Replay feature on any chart with the Indicator to see how it works.
How to change Strat Candles, Open Price Level Labels/Price Lines and Active FTFC Candle Color's:
- All color's are customisable within the Indicator Settings. After you choose your color's on the Inputs and Style pages make sure you click the drop down arrow next to 'Defaults' (bottom left of the indicator settings) and then click 'Save As Default' to save your personalised indicator preferences.
Screener Outside BarsBased on the teachings of Rob Smith
1= Inside Candle
2= Goes past the previous candle's price up or down
3= Goes past the previous candle's price on both sides
Outside Bar (3) is a bar that has broken the price of both sides of the previous bar.
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40.
Looking for outside bars within 40 symbols. By default some symbols are entered in the indicator already. They cannot be left empty. If left empty, the script might not work properly.
By changing the timeframe, outside bars can be looked under many timeframes like Monthly, Weekly, Dialy, Intraday, etc.
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger than in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
Screener Red?Based on the teachings of Rob Smith
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40. All of the symbols need to entered. If any symbol field is left empty, the script might not work properly.
This is a simple screener which checks if the current candle is red/going down.
I add it 4 times and change the timeframes on each one to tell me if any of the symbols scanning through have FTFC(Full time frame continuity). If a symbol appears in all of the timeframes selected, it would have continuity in all of those timeframes. Meaning going down in all of those selected timeframes.
I like to add a textbox on top of the labels manually when I change the timeframe to tell me which timeframe the indicator is scanning through.
Always double check in the settings of the indicator that the correct timeframe is selected.
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
Screener Green?Based on the teachings of Rob Smith
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40. All of the symbols need to entered. If any symbol field is left empty, the script might not work properly.
This is a simple screener which checks if the current candle is green/going up.
I add it 4 times and change the timeframes on each one to tell me if any of the symbols scanning through have FTFC(Full time frame continuity). If a symbol appears in all of the timeframes selected, it would have continuity in all those timeframe. Meaning going up in all of those timeframes.
I like to add a textbox manually on top of the labels when I change the timeframe to tell me which timeframe the indicator is scanning through.
Always double check in the settings of the indicator that the correct timeframe is selected.
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
Screener Potential 312 / 212 / 122Based on the teachings of Rob Smith
1= Inside Candle
2= Goes past the previous candle's price up or down
3= Goes past the previous candle's price on both sides
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40.
Looking for short or long setups within 40 symbols. By default some symbols are entered in the indicator already. They cannot be left empty. If left empty, an error comes up and the script doesn't load.
The reversal setups this indicator is looking for
212
312
122
Can look through many timeframes like monthly, weekly, daily, intraday by changing the timeframe in the input tab under settings.
Default timeframe is set to 1 Day.
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger than in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
Screener Inside BarsBased on the teachings of Rob Smith
1= Inside Candle
2= Goes past the previous candle's price up or down
3= Goes past the previous candle's price on both sides
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40.
Looking for inside bars within 40 symbols. By default some symbols are entered in the indicator already. They cannot be left empty. If left empty, an error comes up and the script doesn't load.
By changing the timeframe, inside bars can be looked under many timeframes like Monthly, Weekly, Dialy, Intraday, etc.
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger than in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
Screener Long SetupsBased on the teachings of Rob Smith
1= Inside Candle
2= Goes past the previous candle's price up or down
3= Goes past the previous candle's price on both sides
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40.
Looking for long setups within 40 symbols. By default some symbols are entered in the indicator already. They cannot be left empty. If left empty, an error comes up and the script doesn't load.
Some of the reversal short setups this indicator is looking for
e.g.
212 = 2down 1inside 2up
22 = 2down 2up
33.. 3down 3up
etc
It is also looking for continuous setups as well
e.g.
22 = 2down 2down
212 = 2down 1inside 2down
etc
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger than in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
Screener: Shorts SetupsBased on the teachings of Rob Smith
1= Inside Candle
2= Goes past the previous candle's price up or down
3= Goes past the previous candle's price on both sides
Ability to change the timeframe and the symbols this indicator is scanning through in the input tab under settings of this indicator. Maximum symbols 40.
Looking for short setups within 40 symbols. By default some symbols are entered in the indicator already. They cannot be left empty. If left empty, an error comes up and the script doesn't load.
Some of the reversal short setups this indicator is looking for
e.g.
212 = 2up 1inside 2down
22 = 2up 2down
33 = 3up 3down
etc
It's also looking for the continuous short setups as well
e.g.
212 = 2down 1inside 2down
22 = 2down 2down
etc
First label is for all of the symbols the indicator is scanning.
Second label is the result of the scan. Text is bigger than in this label than the first label to differentiate from the first label and for ease of use.
Please DM me on how to access this indicator.
