All About the Head & Shoulders Pattern(Beginner-Friendly) Part.2Hello, everyone.
Today, I’m excited to share the second part of my educational series on chart patterns.
In this post, we’ll be focusing on the 'Head and Shoulders' and 'Inverse Head and Shoulders' patterns.
For those who missed the first part, you can catch up here:
↓↓↓
As always, I’ve kept the explanations simple and beginner-friendly. I hope this guide provides you with valuable insights!
Here’s today’s outline:
————
✔️ Outline
1. What is the Head and Shoulders pattern?
Definition
Key components
Characteristics
2. Head and Shoulders
Basic features
Examples
3. Inverse Head and Shoulders
Basic features
Examples
————
1. What is the "Head and Shoulders" pattern?
1) Definition
The Head and Shoulders pattern is a well-established reversal formation that appears after an uptrend and signals the potential start of a downtrend. It indicates that buying pressure is weakening and selling pressure is gaining momentum.
2) Key components
Left Shoulder: The initial peak, where the price rises and then pulls back.
Head : The highest peak, situated between the two shoulders, representing the final bullish push.
Right Shoulder: The third peak, which is typically lower than the head but similar to the left shoulder, signaling diminishing buying interest.
Neckline: A key support line drawn across the lows of the left and right shoulders. A decisive break below this neckline confirms the reversal and the beginning of a downtrend.
3) Characteristics
Reversal signal: The Head and Shoulders pattern marks a transition from an uptrend to a downtrend.
Easy identification: The structure is visually distinctive, with three clear peaks.
Neckline significance: A break below the neckline serves as a confirmation signal for the downtrend.
Volume dynamics: Volume typically rises during the formation of the left shoulder and head, decreases during the right shoulder, and surges again when the neckline is breached.
————
2. Head and Shoulders (Reversal from uptrend to downtrend)
1) Basic features
End of an uptrend: The Head and Shoulders pattern forms at the end of a bullish phase, signaling a weakening in buying strength.
Distinct peak heights: The head is always higher than the shoulders, which are generally symmetrical, though the right shoulder may sometimes be slightly lower, enhancing the pattern’s reliability.
Neckline as a trigger: The neckline acts as a critical support level. A break below it confirms the pattern and signals the onset of a bearish trend.
Volume confirmation: Volume increases during the left shoulder and head formations, weakens during the right shoulder, and spikes when the neckline is broken, confirming a potential sell-off.
Price target: After the pattern completes, the expected price drop is typically equal to the distance between the head and the neckline, providing traders with a target.
2-1) Example 1
In this example, we see a fakeout at the right shoulder, followed by a sharp decline.
After a brief retest of the neckline, the price broke through and continued its downtrend.
2-2) Example 2
In this chart, a fakeout occurred when the price dropped from the head and formed the neckline, misleading many market participants. After forming the right shoulder, the price successfully declined. There were two retests, which confirmed the reliability of the pattern.
————
3. Reverse Head and Shoulders (Trend reversal from downtrend to uptrend)
1) Basic features
End of a downtrend: The Inverse Head and Shoulders pattern typically forms at the end of a downtrend, signaling a potential reversal to the upside.
Formation of lows: Like the standard Head and Shoulders, this pattern consists of three lows—left shoulder, head, and right shoulder—with the head being the lowest point.
Neckline significance: The neckline is drawn across the highs of the left and right shoulders. A break above this line confirms the reversal and acts as a strong buy signal.
Volume pattern: Volume tends to decrease during the formation of the pattern but surges when the neckline is broken, signaling strong buying momentum.
Target setting: After the pattern is confirmed, the expected price rise is often equal to the distance from the head to the neckline, which helps traders set profit targets.
2-1) Example 1
After the Head and Shoulders pattern formed, the price broke above the neckline, successfully reversing the downtrend into an uptrend. A buy strategy would have yielded profits at the breakout point.
2-2) Example 2
In this example, a smaller Reverse Head and Shoulders pattern formed within the head of a larger pattern (see Example 3). After two successful retests, the price reversed into a strong uptrend.
2-3) Example 3
This example showcases the smaller Reverse Head and Shoulders pattern mentioned in Example 2, located within the head. After two successful retests, a buy strategy could have led to profits as the price reversed into an uptrend.
————
✔️ Conclusion
"Charts are the maps of the market."
The Head and Shoulders and Reverse Head and Shoulders patterns we’ve covered in this post are key signals that frequently appear in the market. Charts aren’t random—they are visual representations of market psychology and investor behavior. As traders, our role is to interpret these maps, navigate the market, and make informed decisions.
Investing is more than just buying and selling. Sometimes the market may move contrary to our expectations, while other times we seize opportunities and achieve success. Each experience is a chance to learn and grow. The more experience you gain, the more paths you’ll recognize on the chart.
Success in this market requires persistence, patience, and continuous learning. Understanding and analyzing chart patterns like the ones discussed here is just the beginning. I hope this post has helped you gain a deeper understanding of the market and make more informed decisions.
The market is always evolving, but within that evolution lies opportunity. The key is developing the ability to spot those opportunities. With knowledge, experience, and confidence, you’ll find greater success.
Stay prepared, and always listen to what the market is telling you.
Head_and_shoulder
Head & Shoulders pattern: 10 year yield could drop to 2.87%The series of tops shaped notorious Head & Shoulders pattern
on 10-Year Treasury yield (TNX).
The tallest peak is the Head and Shoulders are on both sides.
The Neckline is the support that is built through valleys of the Head.
The price has breached the Neckline this summer triggering the pattern bullish scenario.
The target is calculated by subtracting the height of the Head (from top to Neckline) from
breakdown point on the Neckline. It is located around 2.87%.
Almost 1% down from the current level
Inverted Head and Shoulders: A Comprehensive GuideThe Inverted Head and Shoulders pattern is a popular and reliable reversal pattern that signals a potential shift from a downtrend to an uptrend. Understanding and identifying this pattern can provide traders with profitable trading opportunities.
Anatomy of the Inverted Head and Shoulders Pattern.
Left Shoulder: The price declines to a trough and subsequently rises.
Head: The price falls again, forming a lower trough.
Right Shoulder : The price rises once more before declining to a trough similar to the left shoulder.
Identifying the Pattern
To accurately identify an Inverted Head and Shoulders pattern, look for the following characteristics:
Three Troughs: The head should be the lowest point, with the two shoulders on either side.
Neckline: Draw a trendline connecting the peaks of the two shoulders. This line acts as a resistance level.
Breakout Confirmation
The pattern is confirmed once the price breaks above the neckline with increased volume. This breakout indicates a reversal of the previous downtrend and the start of a new uptrend.
Trading the Inverted Head and Shoulders
Entry Point
Enter a long position when the price closes above the neckline. To reduce false breakouts, consider waiting for a retest of the neckline as support.
Stop-Loss
Place the stop-loss order below the right shoulder to limit potential losses. This level provides a cushion against false breakouts and unexpected market movements.
Target Price
The target price can be estimated by measuring the distance from the head to the neckline and projecting this distance upward from the breakout point.
Example:
Example Reference image of chart ONGC on Daily Time Frame shared below
Distance from Head to Neckline: 62 points
Breakout Point: 280 points
Target Price: 342 points
Practical Example of ONGC chart
The neckline is drawn connecting the two peaks at 280 level. A breakout occurs at 280 level with increased volume and now candle closed bullish at 288 levels with Good intensity of Volumes.
Key Points to Remember
Volume: Volume should increase during the formation of the pattern, especially at the breakout point.
Timeframe: The pattern can form over various timeframes, but it is more reliable over longer periods.
Market Context: Always consider the broader market context and other technical indicators to confirm the pattern.
Conclusion
The Inverted Head and Shoulders pattern is a powerful tool for traders looking to capitalize on trend reversals. By understanding its structure and applying disciplined trading strategies, traders can enhance their ability to identify and profit from these patterns.
I am not Sebi registered analyst.
My studies are for educational purpose only.
Please Consult your financial advisor before trading or investing.
I am not responsible for any kinds of your profits and your losses.
Most investors treat trading as a hobby because they have a full-time job doing something else.
However, If you treat trading like a business, it will pay you like a business.
If you treat like a hobby, hobbies don't pay, they cost you...!
Hope this post is helpful to community
Happy Trading!
RK💕
Disclaimer and Risk Warning.
The analysis and discussion provided on in.tradingview.com is intended for educational purposes only and should not be relied upon for trading decisions. RK_Charts is not an investment adviser and the information provided here should not be taken as professional investment advice. Before buying or selling any investments, securities, or precious metals, it is recommended that you conduct your own due diligence. RK_Charts does not share in your profits and will not take responsibility for any losses you may incur. So Please Consult your financial advisor before trading or investing.
Head and Shoulders Tutorial on Crude Oil ChartI have decided to start a short series of tutorials covering common instruments used in technical analysis.
In today's tutorial, we observe a successfully identified head and shoulders pattern on the 4-hour chart of Crude Oil, resulting in a substantial movement of around 17%.
Here's how to find the instrument: navigate to the left sidebar and select 'Patterns,' where you will find 'Head and Shoulders.'
Analyzing and trading correctly involve the following steps:
1) Both shoulders must form within a rising or falling trend. In the case of that Oil chart, we observe a rising trend, indicating a potential short position.
2) The size of the head becomes our target for take profit (TP), and upon reaching TP, we close 80% of the position.
3) Ideally, volumes at the right shoulder should decrease, and upon breaking, they should increase.
Risk Management Strategy:
1) Limit each trade to no more than 2% of your deposit.
2) Always utilize stop-loss and take-profit orders.
3) Never trade money you are not prepared to lose.
4) Start with small budgets.
It is crucial to emphasize that risk management must be adhered to whenever you engage in trading!
Register and trade stocks and crypto using my link with a discount on commissions: bingx.com/invite/E6RCUFJT
Trading with Head and Shoulders patternUsually the head and shoulders pattern perform at the end of channel up as a sign of a reversal trend.
In this chart, we can see channel already broken on October 23, but the right shoulder has not fully performed yet.
To trade with this pattern, we have a several conditions :
1. Wait for right shoulder to completely perform to touch neckline at 1.0530. As long as right shoulder not higher than head , this pattern is still valid.
2. After we have a perfect right shoulder, we need one candle full to break down the neckline as bearish confirmation .
3. Usually broken neckline will bounce at previous support to retest neckline . This is the right moment to enter short position
4. Best stop loss position is above right shoulder, as long as the risk reward ratio is still above 2
5. Head to neckline are equal to neckline to target (AB=CD). So in this sample we have 1.0361 as profit projection
note : consider this pattern as failure , If step 1 to step 3 failed to perform
How to Head and ShouldersGreetings, Financial Enthusiasts! 🌟 If you appreciate our charts, give us a quick 💜💜
The Head and Shoulders pattern is a well-known chart formation in technical analysis. It indicates a reversal from a bullish to a bearish trend, usually at the end of an upward trend.
Key Points:
- Head and Shoulders: Chart pattern signaling trend reversal.
- Formation: Three peaks on a baseline - two lower outer peaks and a higher middle peak.
- Bullish to Bearish: Suggests a shift from an upward trend to a downward one.
- Applicability: Seen on all timeframes, suitable for various traders and investors.
- Entry Levels: Easily identifiable, aiding in trade implementation.
Why It Matters:
The Head and Shoulders pattern provides traders with a visual representation of a trend reversal. It's widely used due to its simplicity and applicability across different timeframes.
The Pattern:
- Formation (Market Tops):
1. Left Shoulder: Price rises, forms a peak, then falls.
2. Head: Price rises again, forming a higher peak.
3. Right Shoulder: Price falls again, then rises but forms a lower peak than the head.
- Formation (Market Bottoms):
1. Left Shoulder: Price falls, forms a trough, then rises.
2. Head: Price falls again, forming a lower trough.
3. Right Shoulder: Price rises again, then falls, forming a higher trough than the head.
Neckline:
- For Market Tops: Connect the low after the left shoulder to the low following the head to create the neckline.
- For Market Bottoms: Connect the high after the left shoulder to the high after the head to form the neckline.
Trading the Pattern:
- Wait for the pattern to complete before trading.
- Entry when price breaks below the neckline (tops) or above it (bottoms).
- Stops placed above the right shoulder (tops) or below it (bottoms).
- Profit targets calculated based on the head-to-shoulder difference and added (bottoms) or subtracted (tops) from the breakout level.
Why It Works:
- Sellers enter as price falls from its peak, reducing aggressive buying.
- The neckline marks a point where traders exit positions, driving price toward the target.
- A lower right shoulder (tops) or higher right shoulder (bottoms) signals a trend shift.
- Profit target assumes forced exits by those in losing positions.
- The neckline prompts many traders to exit, pushing price towards the target.
- Volume analysis helps confirm patterns; expanding volume (bottoms) shows increased buying interest.
Pitfalls:
- Waiting for pattern completion may require patience.
- Not all patterns lead to successful trades.
- Profit targets aren't always reached.
- External events can disrupt patterns.
- Patterns can be subjective; traders should define their criteria.
The Head and Shoulders pattern, though not foolproof, provides a structured approach to identify and act on trend reversals.
How to trade head and shoulder pattern? As a forex trader, it's essential to have a robust arsenal of technical analysis tools at your disposal. One of the most powerful and reliable chart patterns you can use is the "Head and Shoulders" pattern. This pattern is prized for its ability to signal potential trend reversals, allowing traders to make informed decisions and capitalize on market opportunities. In this comprehensive guide, we'll delve deep into the Head and Shoulders pattern, breaking down its components, identifying its variations, and learning how to trade it effectively.
Understanding the Head and Shoulders Pattern
The Head and Shoulders pattern is a classic reversal pattern that forms after an extended uptrend, signaling a potential change in market direction from bullish to bearish. It consists of three peaks, with the middle peak (the "head") being higher than the other two peaks (the "shoulders"). The pattern typically unfolds as follows:
1. The Left Shoulder
- The left shoulder represents the first peak after a strong uptrend.
- This peak is typically followed by a minor retracement, creating the first trough.
2. The Head
- The head forms after a brief rally from the left shoulder's low point.
- It represents the highest peak in the pattern and usually exceeds the previous peak.
- After reaching this peak, the price retraces again, forming the second trough.
3. The Right Shoulder
- The right shoulder is the third and final peak in the pattern.
- Like the left shoulder, it is lower than the head and forms after a minor rally.
- The right shoulder's high is followed by a retracement, creating the third trough.
Key Characteristics of the Head and Shoulders Pattern
To effectively identify and trade the Head and Shoulders pattern, it's crucial to understand its key characteristics:
1. Symmetry
- The left and right shoulders should be roughly symmetrical in terms of height and width.
- The head should be the highest point in the pattern.
2. Volume
- Volume plays a vital role in confirming the pattern.
- Volume should generally decline as the pattern forms and then increase as the price breaks below the neckline (more on this later).
3. Neckline
- The neckline is a trendline drawn horizontally connecting the low points of the left and right troughs (the shoulders).
- The neckline serves as a critical level of support. A breach of this level confirms the pattern.
Trading the Head and Shoulders Pattern
Trading the Head and Shoulders pattern involves two main steps: identification and execution.
Identification:
1. potting the Pattern: Begin by identifying a well-defined Head and Shoulders pattern on your forex chart.
2. Volume Confirmation: Ensure that volume decreases as the pattern forms and increases upon breaking the neckline.
3. Neckline: Draw a neckline connecting the lows of the left and right shoulders.
Execution:
1. Entry Point: Place a short trade when the price breaks below the neckline. This serves as a signal that the pattern has confirmed.
2. Stop-Loss and Take-Profit: Set a stop-loss order above the right shoulder and a take-profit order based on your risk-reward ratio.
3. Risk Management: Be mindful of risk management, and never risk more than you can afford to lose on a single trade.
Variations of the Head and Shoulders Pattern
While the classic Head and Shoulders pattern is powerful, variations can offer additional insights:
Inverse Head and Shoulders:
- An inverse Head and Shoulders pattern signals a potential bullish reversal.
- It comprises three troughs with the head being lower than the shoulders.
- The pattern is confirmed when the price breaks above the neckline.
Complex Head and Shoulders:
- Complex variations may have multiple heads or shoulders, making them harder to spot.
- Despite their complexity, they follow the same principles of confirmation through neckline breaches.
Conclusion
The Head and Shoulders pattern is a valuable tool in the forex trader's toolkit. By mastering its identification and execution, you can gain a competitive edge in the market. Remember that no pattern is foolproof, and risk management remains paramount in forex trading. As with any technical analysis tool, it's essential to combine the Head and Shoulders pattern with other indicators and analysis methods for a well-rounded trading strategy. So, start practicing, keep refining your skills, and always stay informed about the latest market developments to become a successful forex trader.
THE KING OF THE HEAD AND SHOULDERS | How to find this pattern
⚡Zer0_Trader
The essence of the strategy is to search for the direct and inverted "Head & Shoulders" pattern
Shoulders" pattern with the simultaneous confirmation of its potential workout on
Zer0 Trader Indicator" indicator, which makes it possible to trade regularly,
minimizing the closing of trades by stops.
❌TRADING WITHOUT AN INDICATOR
We see the "Head & Shoulders" formation, enter the trade 🔜 the trade is closed by a Stop Loss⛔
✅Trading with the "Zer0 Trader Indicator" indicator
We see the formation "GIP", we see the confirmation of the result on the indicator, we go into
trade 🔜 trade is closed at Take Profit
As you can see from the examples above, it is absolutely not enough to find
only a formation because:
- Perfect formations are quite rare in the market, and full-fledged
it is necessary to trade regularly to make a full-fledged profit;
- Every trader tends to see or "complete" a formation where it is not
any trader has a tendency to see or "draw" a formation where it doesn't exist and this leads to an increase in loss-making trades;
- without additional confirmation of a potential working out of a formation your deals
form, your trades will be closed by stops more often and take unnecessary losses which
you could have avoided using the indicator.
📈 INDICATOR "Zer0 Trader Indicator"
In order to enter non-obvious but potentially profitable situations and
I created the "Zer0 Trader Indicator" indicator to minimize errors. Thanks to
which increased the percentage of profitable trades by 90%, and the percentage of trades closed
of trades closed by stop was reduced to 10%.
The signal to enter the trade, along with the formation of Head & Shoulders/reverse Head & Shoulders, are the reduction of
strength on the indicator, namely, descending peaks (divergence/convergence), as in the
examples below.
🔎EXAMPLES OF WORKOUTS
In the framework of the trading strategy with the use of the indicator all situations can be
can be divided into 2 types:
- Head & Shoulders/ reverse Head & Shoulders with a flat base
- Head & Shoulders/ reverse Head & Shoulders with diagonal base
🟢Head & Shoulders/ reverse Head & Shoulders with flat base
*ideal, but rather rare situation
🟢Head & Shoulders/ reverse Head & Shoulders with a diagonal base
*The situation you will deal with most often
✍️ STEP BY STEP INSTRUCTIONS FOR WORK
Setting up a chart in TradingView
- Line" chart view
- logarithmic scale
Searching for the Head & Shoulders/ reverse Head & Shoulders pattern
- it is important that similar patterns draw several coins simultaneously
- on a downtrend, the chart and the indicator should be reversed (the scale should be inverted)
- you can look for a pattern by the indicator (divergence)
- the more ideal-looking is the pattern, the higher is the probability of its execution
- it is important that the pattern is drawn correctly not only on the line, but also on a candlestick chart
chart
Comparison of the chart and the indicator
The indicator must show a decrease in strength (three
divergence).
Searching for the entry point
TVX - entry point when the neckline is broken and the
of the candle behind it. It's important to have an identical pattern
on other coins as well.
Risk evaluation
Potential of the trade is measured from the top of the head to
the level of the neck line. We draw a line from the peak of the head to the
the neck line and re-position it to the potential breakout point.
We take the "Short/Long Position" tool and put
it in the TVX. Then we stretch out the targets by the level of potential,
and stop 3-4% above the head (on the candlestick chart).
Setting targets
Objective 1 (45%) - from the entry point to the middle of the breakout
Target 2 (45%) - till the end of analysis
Target 3 (10%) - to the moon, based on the previous extremums
*At achievement of the first target we move the stop to the Buy
☢️ THE MOST COMMON MISTAKE
Entering a trade in the absence of a pronounced divergence on the indicator
Such an error leads, at a minimum, to unjustified and useless losses, and, at a maximum, to
at most, liquidation, if there were no stops at all!
🔴THE MOST IMPORTANT SECTION
WHERE TO START TRADING?
You have read this tutorial, you understand everything and you are ready to fix the profit. BUT!
The first thing you need to start with is training on history and developing
observation of not just the chart, but the chart through the prism of this strategy. For
I strongly recommend each of you to do your homework.
Despite the fact that I've been trading for several years now, I myself regularly
myself on a regular basis.
HOW TO DO MY HOMEWORK?
1. You pick any coin and any year that has already completely passed.
2. Rewind the chart to January 1 and press "Market Simulator", which
will hide the chart movement from you after that date.
3. Choose a simulation speed of x10 and press the "Forward" button until you see the potential formation of the right shoulder,
until you see the potential formation of the right shoulder and head.
4. Next, you draw a potential neck line, a working pattern, and wait for
for confirmation of the formation. Additionally, see if a similar situation is drawn on other charts.
situation on other charts.
5. The deal worked out.
6. Make 2 screenshots (line + candlestick) and enter the results in the table
"Home" in your worksheet.
7. You save the screenshots in the folder with the name of the coin and drop them into the chat room, where I will
give comments.
Why do Patterns fail so often?To answer this question, let's try to take a classic Pattern as an example: the "Head and Shoulders" .
Typically Traders take short position (in this example) on neckline breakout and place stop loss above right shoulder or head.
If we only take these elements into consideration, it often happens that pattern fails.
Why does this happen? Because these elements are not enough and we need to use some "filter".
One of these filters, and perhaps the most important, is the "placement".
For example, the Head and Shoulders is considered a Reversal Pattern that should only appear at the end of a Trend, and this is where the "Elliott Waves" come into play. In fact Elliott claims that a Trend is formed of 5 waves (3 + 2) and often the first signal of the end of the trend is the first bearish leg after wave 5 (Wave A).
Another important filter could be RSI indicator because often some divergence also appears in wave (5).
In conclusion, the Patterns work very well on the market but you also need to learn how to use them correctly, trying to use some filters to get some more confirmation and limit losses as much as possible.
Naturally these considerations are personal and come only from my experience, but they are absolutely subjective and therefore open to criticism.
...I hope I was helpful.
📊How To Trade: H&S Pattern📍How to Identify and Use the Head and Shoulders Pattern
The head and shoulders pattern is characterized by key features to look out for on trading charts. It typically occurs after a bullish uptrend when buying pressure begins to fade. The pattern includes a left shoulder, a higher middle peak, and a right shoulder approximately at the same level as the left shoulder. Additionally, the pattern should have a distinct neckline acting as a support level.
✔️To successfully identify and trade the head and shoulders pattern, consider the following step-by-step approach:
🔹 Look for three distinct tops , namely the left shoulder, head, and right shoulder, which occur after an uptrend.
🔹 Identify the neckline support level , which connects the lowest points of the left and right shoulders.
🔹 Wait for a breakout to occur, confirmed by a candle closing below the neckline.
🔹 Once the breakout is confirmed, place a selling order to capitalize on the bearish reversal signaled by the pattern.
🔹 Implement a stop-loss order above the neckline, ideally positioned at the highest level of the right shoulder, to manage risk effectively.
🔹 Consider using a risk-reward ratio to determine a suitable target for taking profits, ensuring the potential reward justifies the risk taken.
Lets consider the following example below as a step by step to identify the pattern. This is what it would look like in a real scenario:
Step 1: Price is moving on an uptrend and starting to form the head and shoulder peaks
Step 2: We can identify the neckline which we can observe price react as a temporary support which connects the lower peaks. We need to wait for a clear breakout in order to find an entry
insert s2.png image here
Step 3: Price broke below the neckline and re-tested the neckline so we enter a short position on the re-test with taking profit target the length of the head to neckline
insert s3.png image here
Step 4: We can see the pattern was correct and it hit our targets
insert s4.png here
👤 @QuantVue
📅 Daily Ideas about market update, psychology & indicators
❤️ If you appreciate our work, please like, comment and follow ❤️
BITCOIN - Head and Shoulders Targeting $21000BTC is in a good setup for a head and shoulders to the downside. The head and shoulders is a bearish pattern where the price bounces and returns to the "Neckline" support level the 3 times with the final return resulting in a break of neckline support.
How to spot
The easiest way to spot a head and shoulders is to find a support level that the price is bouncing off of. Look for a moderate bounce that returns to support followed by a larger bounce that also returns to support. This is the left shoulder, head setup. In this case, you can see a possible right shoulder forming around $23120. This price area has proven to be strong resistance. It has kept the price at bay for weeks now with all breakouts retreating back below it. As a result, it's the perfect set up for a head and shoulders.
How to set your target price
To determine your target price, measure the distance between the top of the head and the neckline. In this case, $1500. Subtract this amount from the neckline and you will get your target price.
Make the bearish case
How is the price action looking? Is the price action bearish? Is there a lot of buy or sell volume? By making a bearish case prior to your head and shoulders call, you will have more success in your trades.
BTC BEARISH CASE
-Broke the red channel
-Returned back below strong resistance
-Bear flag setup for right shoulder
How to Trade
Some traders like to enter their short at the top of what they perceive to be the right shoulder. The weaker (lower) the right shoulder in comparison to the left shoulder, the better. This shoulder is still early so its difficult to say whether we've topped yet, but the strong resistance would make me feel better about entering here. Other traders like to enter their short once the price has broken the neckline, which would be a more definite bearish move.
Technical patterns are never 100% for certain. However, if you can spot them and trade them in the right circumstances, you will find a lot of success. Best of luck! I hope this helps improve your trading and your PnL!
QML pattern Quasimodo | SMART MONEY CONCEPTHello all. Today we will talk about the reversal pattern "Quasimodo" or QML. Schematically it looks like this:
The price moves in the trend, in POI the structure breaks and after that, the price can not update the previous HH and the downward movement continues (consider a schematic example).
In this example, after the breakdown of the structure, the price reverses to soften and remove internal liquidity, after which a reversal occurs. This is done in order to close a losing position at the expense of those who put their stop losses behind the maximum of the substructure.
There are many names for this pattern, such as three tap setup, but I'm more accustomed to calling it quasimodo. If you like, it's a reworked version of the "head and shoulders" pattern, but in this case you're focusing on the price action instead of the picture.
Criteria for QML formation
1. Use it in HTF POI
2. Watch HTF POI
3.Watch the price action.
4. Premium or Discount zone
To use the pattern effectively, you must analyze the chart of all TFs. And use the pattern as an entry model. For example, the daily TF is bearish. The price is in the premium zone, as well as on the H1 TF began an uptrend, a full of bullish trend in the lower TF, after which we see that the substructure (red) has changed from a rising to a descending. And thus, we expect a continuation of the downtrend.
Important
Don't use this pattern in terms of "drawing". They can draw anything on the chart. I recommend to look for POI in POI of higher TFs.
An additional factor could be substructure fluctuations before FWG or OB. You need to see how the price behaves after their update.
Where to put a stop loss
The first option is a stop-loss for a local FVG/OB
The second - above swing high of substrucutre
Third - above the HTF point of interest, if your RR allows it
EXAMPLE
After updating the all-time high, the daily structure was broken. Then price consolidated, it was worth waiting for the manipulation. It was possible to enter from HTF POI - aggressive entry, but it was possible to wait for confirmation on the LTF (as I do).
I'm expect bullish OF on 4H chart to HTF POI (2D ob)
This "entry into position" is shown as an example, so that you can form an understanding of how to act in this or that situation. In conclusion, the more factors you take into account in your analysis, the higher the probability of working out of the pattern. Also, it's up to you to choose what kind of stop loss you will use. There is no right and wrong, everything depends on your strategy and money management.
The position was opened after the second liquidity raid in the premium market. I hope it was helpful to you. Thank you for your attention
📉📈 ZigZag IndicatorZigZag's primary goal is to focus on significant swings and trends by removing insignificant and misleading price changes.
ZigZag connects the price's highest and lowest points using straight lines while ignoring minor swings.
ZigZag just aims to make sense of the market's previous movements; it makes no attempt to predict the price of an item.
It is only based on hindsight and is not predictive in any way. It is based on the past prices of securities and cannot forecast the next swing highs and swing lows.
🟢Advantages
It eliminates market noise and displays the most significant price fluctuations.
It operates in several timeframes.
When utilized in cooperation with other technical indicators, it gives positive results.
🔴Disadvantages
It will mark the latest high or low of the price with a time lag.
The last stretch of the indicator (the one that involves the current price) may be redrawn.
Not predictive in any way, has to be used in combination of other strategies to be effective.
👤 @AlgoBuddy
📅 Daily Ideas about market update, psychology & indicators
❤️ If you appreciate our work , Please like, comment and follow
HEAD AND SHOULDERS PATTERN - TRADING GUIDE Head and Shoulders pattern
This lesson will cover the following
What is a “Head and Shoulders” formation?
How can it be confirmed?
How can it be traded?
The Head and Shoulders pattern forms after an uptrend, and if confirmed, marks a trend reversal. The opposite pattern, the Inverse Head and Shoulders, therefore forms after a downtrend and marks the end of the downward price movement.
As you can guess by its name, the Head and Shoulders pattern consists of three peaks – a left shoulder, a head, and a right shoulder. The head should be the highest and the two shoulders should be at least relatively of equal height. As the price corrects from each peak, the lows retreat to form the so-called neckline, which is later used for confirming the pattern. Here is what an H&S pattern looks like.
Other key elements of this pattern and its trade process are the breakouts, protective stops, profit target, and volume, which is used as an additional tool to confirm the trend reversal. So here is how you identify the Head and Shoulders pattern and how its individual components are characterized.
Formation and confirmation
In order to have a trend reversal pattern, you definitely need a trending market. Let's talk about the first model of H&S, the Inverse or Reversal will have the same methodology but exactly in the opposite way.
While prices are trending up, our future patterns left shoulder forms as a peak, which marks the high of the current trend. For the shoulder to be formed, the price then needs to correct down, retreating to a low, which is usually above or at the trend line, thus, keeping the uptrend still in force. This low marks the first point used to determine where the neckline stands.
Afterward, a new higher peak begins to form, stemming from the left shoulder low, which is our pattern head. As the market makes a higher high (the head), it then corrects back and usually, this is the point where the upward trend is penetrated, thus signaling a shift in momentum and a possible Head and Shoulders pattern.
The second low that is touched after the retreat from the heads peak is the other point used to build the neckline, which is basically a line drawn through the two lows.
The subsequent rebound from the second low forms the third peak – the right shoulder. It should be lower than the head and overall match the height of the left shoulder (keep in mind that exact matches rarely occur). It is also preferable that the two shoulders have required relatively the same amount of time to form as this would make the pattern stronger.
In order for the Head and Shoulders pattern to be confirmed, the retreat from the third peak (the right shoulder) should penetrate the neckline and a candle should close below it.
The neckline itself should be horizontal in the perfect case scenario, but that rarely happens. Instead, most often it is sloping up or down and that is of significance as well – a downward-sloping neckline is more bearish than an upward-sloping one.
Volume
As mentioned above, volume plays a key role as a confirmation tool and can be measured via indicators or by just analyzing its levels. Presumably, volume during the left shoulder advance should be higher than during the subsequent one, because as the head hits a higher high on the base of declining volume, this serves as an early signal for a possible reverse. This, however, does not happen every time.
The next step of confirmation comes when volume increases during the decline from the head's peak and the last nail in the coffin are when volume gains further during the right shoulder's decline.
Trading the pattern, stops and profit targets
We said earlier that the Head and Shoulders pattern is deemed confirmed if the right shoulder's decline penetrates through the neckline and a candle closes below it. As soon as that happens and you are reassured that it is not a false breakout, you can enter into a short position. However, as you already know, no trading decisions should be made on the go, i.e. you need to have predetermined where your protective stop is going to stand and what your profit target is.
Protective stop
There are two common places where you can place your stop loss. The first one, which is more conservative, is right above the peak of the head, while a more standard position is right beyond the right shoulder. You can see those visualized in the following screenshot.
The second option makes more sense because if the breakout through the neckline actually fails and the price rebounds back with such momentum that it rises beyond the right shoulder, then the whole pattern is flawed and you definitely do not need to wait for it to exceed the head as well. Besides, such a loose stop significantly increases the risk and reduces the risk/reward ratio, thus, reducing this pattern's trading appeal.
Profit target
The most common and often advised profit target is the distance (number of pips) between the head's peak and the neckline. Having estimated that distance, you then need to subtract it from the neckline, just like in the screenshot below.
And how does that translate in terms of risk/reward ratio? If the breakout confirmation (the close beyond the neckline) appears very close to the neckline itself, and we enter into a short position there, we generally have a 1:1 risk-to-reward proportion, if we use a conservative protective stop. Why?
Since our profit target is the distance between the heads peak and the neckline, if we decide to use the conservative option for a protective stop, then we will have the same distance as a loss limit, thus, reducing our risk-to-reward ratio to 1:1.
This is why, in order to improve that ratio, most experienced traders place their protective stops more often above the right shoulders peak, given that they use the head-to-neckline profit target.
However, keep in mind that this price distance should serve as a rough target, because things are usually not that straightforward and other factors such as previous support levels, crossing mid-term and long-term moving averages, etc. must be taken into consideration as well.
Two ways to trade the Head and Shoulders Pattern
There are generally two ways to trade this pattern, depending on how it plays out. The first one we've already mentioned. As soon as a candle closes below the neckline as a sign of confirmation, you enter into a short position with the respective profit target and protective stop described above.
Now for the second way to trade the H&S formation. In this case, we have a pullback after the neckline penetration, which, once support, now acts as a resistance level. This time we need to go short once the price pulls back and tests the neckline as resistance. As soon as it rebounds from the neckline, we enter into a short position, using the same principle for placing the protective stop and aiming for the same profit as in the first scenario. Here is what this would look like.
Forget about chart patterns! Hello, my dear friends and happy New Year!
I wish you to be healthy and reach all your goals in trading and not only! Never give up on this difficult way which we are going to overcome together!
Today we have a very important topic. How to use Elliott waves instead of classical chart patterns. This is the natural exposure why the chart patterns are garbage. I remember my third year at university when we have the trading lessons. Our teacher gave us a lot of useless knowledges about support, resistance and chart patterns. I have not understood why it should working and it was not soo intereting subject for me. That’s why I returned back to trading much later using self-education. Now I have the clear understanding why Elliott waves is the best tool and why it’s working. Most of traders even don’t understand that chart patterns is just the special case of Elliott waves. That’s why today I decided to explain you how you can change the first one to the second one. Let’s go!
Double Top(Bottom)
On the chart above I drew the different types of double tops. Generally we have 3 types of this pattern
Double top with the second top higher than the first one. In this case we can interpret it in two ways. It could be the classical waves 3, 4, 5 and the corrective wave A at the ending stage. In this case we can anticipate waves B and C. Also it could be the irregular correcton ABC inside wave 4 (rarely in wave 2). In this case we should wait for the wave 5 after that. Traders usually execute short position on the neckline breakdown and suffer when the wave 5 smashed their stop-loss. They are wondering why double top does not working.
Double top with the equal highs has the same possible outcomes. The only one difference that correction called flat instead of irregular.
Double top with the second top lower than the first one. Here is the most common variant is the end of the ABC correction. In this case we have the low potential for shorting the market becuase the new impulsive wave to the upside can hit all stop losses.
Head & Shoulders
This is the easiest pattern for analysis. The right sholder usually is the wave 4, the head, obviously is the wave 5 and the right shoulder is the wave B. On the neckline breakdown we have the shorting potential only in the rest part of the wave C. You could correctly count waves and short that the bearish reversal bar of the wave 5 or, as a last resort, at wave B potential top. Shorting at the neckline has sence only if you are sure that the wave B was the the wave 1 of the impulsive wave to the downside if higher degree and now the market is in wave 3. We have to learn how to count waves in a correct way. I would recommend you to read the Trading Chaos book by Bill Williams because it has the best explanation how do waves work.
Triangles and Wedges
This part is common for all types of triangles (ascending, descending, symmetrical) and wedges (falling and rising). This patterns have the similar structure. If we faced with one of these patterns we have 4 possible scenarios.
Triangle in the downtrend after the wave 3. In this case triangle is the wave 4, which is represented as the triangle correction. This correction type consists of 5 waves A, B, C, D and E. When the wave E is finished market will continue it’s move in the direction of a trend, printing the wave 5.
The same, but in the uptrend.
When the market showed us the 5 waves cycle to the upside and the correction is in progress. Triangle can appears in the wave B. In this case the price will continue the corrective move in the wave C after it’s finished.
The same with the downtrend.
Guys, of course there are much more types of chart patterns. For example, tripple tops and bottoms and so on. The purpose of this article is giving you another view of the market structure and to motivate you studying the Elliott waves theory. Believe me, it has much more potential than it seems on the first glimplse.
Best regards, Ivan
________________________________________________________________________________________________
If you like my educational ideas, please smash the boost button to stimulate me make more quality articles!
#Head&Shoulder chart pattern in action
Head and shoulder definition: A simple head and shoulders top formation is characterized by a peak representing
the left shoulder, followed by a higher peak which is referred to as the head of the formation. A lower peak representing the right shoulder is found on the right‐hand side of the head. The head should be the highest peak in the formation. The neckline is a trendline that connects the troughs that lie on either side of the head. Necklines may be horizontal or inclined which in our case is inclined. In an inverted head and shoulders formation (also referred to as a head and shoulders bottom), the head is the lowest
trough within the formation.
Head and shoulder pattern completion: The head and shoulders formation is completed with a valid breakout of the neckline Until a valid penetration has occurred, the formation is regarded as merely tentative. But as you can see in our case the pattern is completed since we can see upside breakout of the chart pattern neckline.
Head and shoulder pattern target: The minimum one‐to‐one price objective or target for a head and shoulders top formation is simply the vertical distance between the head and the neckline projected downward from the neckline breakout level. For an inverted head and shoulders formation, the vertical distance is projected upward from the neckline breakout level. You can see this vertical line in the chart.
Head and shoulder pattern entry:
■■ Short at a break of the right shoulder’s uptrend line with a stop placed above the right shoulder or head (see Point 1 in Figure 13.9)
■■ Short at the peak of the right shoulder with a stop placed above the right shoulder or head, especially when there is a significant resistive confluence comprising of significant Fibonacci retracement levels, Floor Trader’s Pivot Point levels, and
psychologically important price levels associated with double and triple zeros
■■ Short at the right shoulder when it is testing the left shoulder’s resistance level, with a stop placed above the resistance level or head
■■ Short on a valid penetration of the neckline with a stop placed above the neckline, right shoulder, or head (see Point 2 in Figure 13.9)
■■ Short on a retest of the neckline after a valid penetration with a stop placed above the neckline, right shoulder, or head (see Point 3 in Figure 13.9)
■■ Short on the penetration of the price associated with the trough created by the retest action, with a stop placed above the trough, neckline, right shoulder, or head (see Point 4 in Figure 13.9)
i.postimg.cc
Source: the handbook of technical analysis by Mark Andrew Lim
Position Size Calculation - Example 11. INPUT
PE = Capital($) = 1000
RP = Risk (%) = 2 %
EP = Entry Price = 1719.78
XP = Exit Price = 1733.75
2. OUTPUT (Goal)
PS = Position Size = ?
LEV = Leverage = ?
IM = Initial Margin = ?
3. CALCULATION
RD = Risk ($) = 1000 * (0.02) = 20
SLD = |EP - XP| = |1719.78 - 1733.75| = 13.97
SLP = Stop Loss (%) = (SLD / EP) = (13.97 / 1719.78) = 0.0081
PS = Position Size ($) = RD / SLP = 20 / 0.0081 = 2469.13
CPV = Current Price Value = EP = 1719.78
QNT = Quantity = PS / CPV = 2469.13 / 1719.78 = Roundup(1.435) = 2
4. Assumption and Final Calculation
LEV = {3, 5, 10, 20}
IM = PS / LEV = 2469.13 / {3, 5, 10, 20} = {823.04, 493.826, 246.913, 123.4565}
Head and ShoulderYou probably heard of the Head and Shoulders chart pattern. There are two versions of the 'Head and Shoulders' in the markets. The pattern that resembles a human figure standing upright is the BEARISH version where we would like to see SELLS in the market.
The pattern that resembles a Human figure hanging upside-down is called the "Inverted Head and Shoulders" pattern where we would like to see BUYS in the market.
In this chart example, we have the Bearish version. The head (where the face is located) is often times classified as the stop hunt where liquidity is established. The stop hunt liquidity is where retail buyers are trapped.
An optimal entry for this pattern would be on the right shoulder (located on right side of your screen) with first targets aim at the neckline or beyond.
What is Head and shoulders pattern and how to trade with that?*The Head and Shoulders ( Bearish ) pattern is one of the most popular and best known price patterns in trading.
This is a very accurate trading signal if you know how to use it properly and flexibly.
*What is Head and Shoulders? How to identify and characterize
Head and Shoulders is the name of a special type of price pattern that usually appears at the end of uptrends. This is a signal of future downtrends.
It is called Head and Shoulders because the shape of this pattern on the price chart is similar to that of the human body including Left Shoulder, Head, and Right Shoulder.
The line connecting the two troughs of the shoulders is often called the neckline. In fact, this pattern is perfect when the Neckline is horizontal (the prices of the two lows are approximately the same).
How to trade with this:
ENTRY POINT : Right after the candlestick breaks out of the neckline (or at the Retesting the neckline )
STOP-LOSS : At the peak of the right shoulder.
TARGET : Usually, Head and Shoulders is a pattern for starting a downtrend. Therefore, adjust the first target to the height of the neckline to the top (H) of the pattern and adjust the next targets according to the past price and chart.
This is the academic shape of this pattern, in the future we will publish other types of head and shoulder patterns 📚 . Please follow our page to be informed as soon as the materials are published.
Thank you all for supporting our activity with Likes 👍 and Comments ❤️
General Pattern Failure Explained on BitcoinWhat is General Pattern Failure?
General Pattern Failure occurs when a chart pattern breaks out, fails to hit target, quickly reverses then rejects off that same breakout level back inside the pattern continuing in the opposite direction of the breakout.
Pictured above in the original chart is a normal breakout on a Inverse Head And Shoulders Pattern while the lower very right examples show General Pattern Failure on the same pattern. Note how the first example has a Bullish Retest (A) where price actually increases at the breakout while the second example is coming back inside that area and finding resistance back inside of the pattern, (Bearish Retest, (B) this then leads to price falling back inside with strong volume/momentum.
General pattern failure can also be considered a Liquidity Grab or can be referred to as a “Fake Out”.
-----------------------------------------------------------------------------------------
Other Examples:
The below image shows General Pattern Failure occuring in the opposite direction on #Bitcoin at $11000 on a Head & Shoulders Pattern.
The below image shows General Pattern Failure occuring on BNB Binance Coin (Great Example, Click the image to see the trade play out)
-----------------------------------------------------------------------------------------
Final Thoughts:
So by using the above methodology we have a potential clue here for Bitcoins next movement, I am watching the 49-50k area to see if we continue to fall or see a short term push (if we get back above the Inverse Head & Shoulders Pattern, $53000 is the next area of interest).
Learning to trade patterns such as these can provide great opportunities if you understand price action and how to identify the key areas of the pattern that other traders and investors may be focusing on too, these areas become important psychological levels on the chart that allow us to map out potential trades.
Head & Shoulders Pattern - Advanced AnalysisIn this series about chart patterns we previously discussed narrowing wedges patterns, explaining their identification rules, the measure rule associated with them, and various observations.
In this post, we will cover head & shoulders, inverse head & shoulders, and their complex counterpart. We will cover their identification rules, measure rules, and share some observations regarding these unique yet popular patterns.
The topics covered in this post are mostly based on the work of Bulkowski on chart patterns (1).
1. Head And Shoulders
The head and shoulder pattern also referred to as Head-and-Shoulders Tops by Bulkowski, is a bearish reversal structure commonly found in uptrends, characterized by a series of three maxima with the center maxima higher than the other two.
The first maxima is denoted as "Left Shoulder", the second maxima (the highest one in the formation) is denoted as "Head", and the third maxima is denoted as "Right Shoulder". The volume on a head and shoulders formation should be decreasing over time.
Bulkwoski points out that symmetry can play an important role in the validity of an H&S pattern.
1: H&S = Left Shoulder < Head > Right Shoulder
2: Left Shoulder ≈ Right Shoulder
The first and second maxima are followed by two minima, the line connecting these two-point form the "neckline". Price breaking the neckline downward is a bearish signal (note that a low volume breakout is not indicative of a potential failure).
Ongoing H&S on PGAL daily, waiting for the price to reach the neckline.
2. Inverted Head And Shoulders
The inverted head and shoulder pattern also referred to as Head-and-Shoulders Bottoms by Bulkowski, is a bullish reversal structure commonly found in downtrends, characterized by a series of three minima with the centre minima lower than the previous two.
The first minima is denoted as "Left Shoulder", the second minima (the lowest one in the formation) is denoted as "Head", and the third minima is denoted as "Right Shoulder". Like with a regular H&S, the volume should be decreasing over time.
We can see it's simply a regular H&S pattern, but inverted.
1: Inverted H&S = Left Shoulder > Head < Right Shoulder
2: Left Shoulder ≈ Right Shoulder
The first and second minima are followed by two maxima, the line connecting these two-point form the "neckline". Price breaking the neckline upward is a bullish signal (note that a low volume breakout is not indicative of a potential failure).
Inverted H&S on MTSI daily.
3. Complex Variations
Bulkowski presents two complex variations to the H&S and inverted H&S patterns. These complex variations are similar to the regular ones but have the particularity of having multiple shoulders on each side or multiple heads.
Inverted complex H&S on ARKW daily.
4. Measure Rule
The measure rule for head and shoulders formations allows the determination for the level of taking profits and stop losses after a breakout of the neckline.
In the case of a regular H&S, the take profit should be set at the breakout point minus the height between the formation head value and the neckline value where the head is located.
The same applies to inverted H&S, the take profit should be set at the breakout point plus the height between the formation neckline value where the head is located and the formation head value.
In the case of a complex dual-head H&S formation, the head value that should be selected is the lowest one.
5. Observations
Head and shoulders formations can sometimes be encountered within diamonds formations.
Osler identifies head-and-shoulders trading as a type of noise trading and points out that the immediate price effect of head-and-shoulders trades disappears slowly but completely over the subsequent two weeks (2).
Caginalp and Balevonich found that head and shoulders patterns can be obtained as a consequence of a single group of investors with identical motivations and assessment of the value of the financial instrument (3).
7. References
(1) Bulkowski, T. N. (2021). Encyclopedia of chart patterns. John Wiley & Sons.
(2) Osler, C. (1998). Identifying Noise Traders: The Head-and-Shoulders Pattern in U.S. Equities. Federal Reserve Bank of New York Research Paper Series.
(3) Caginalp, G., & Balevonich, D. (2003). A Theoretical Foundation for Technical Analysis. Capital Markets: Market Microstructure eJournal.
Complex head and shoulders patternHead and shoulders pattern are one of the most reliable patterns with extensive academic evidence supporting its use to improve trading profitability.
Head and shoulders pattern in the real world often look far more complex and a lot messier than the textbook images.
Aurobindo Pharma ShortAuro Pharma is in process of forming head & Shoulder pattern, completion of left shoulder & head has been done right shoulder formation is in process. Once it break neckline trade can be executed.
Target : The profit target for the pattern is the price difference between the head and the low point of either shoulder. This difference is then subtracted from the neckline breakout level (at a market top) to provide a price target to the downside
Stop Loss : stops are placed just above the right shoulder (topping pattern) after the neckline is penetrated