Get started

1d

GBPUSD 1D BEAR FLAG SHORT TRADEAscending Channel is a Range Pattern that is a repeatable trading chart patterns. Ascending channel chart pattern will have a directional bias (Short) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
2
GBPAUD 1D DESCENDING TRIANGLEDescending Triangles are repeatable trading chart patterns. Descending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
BTCUSD 1D ASCENDING TRIANGLEAscending Triangle are repeatable trading chart patterns. Ascending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
COINBASE:BTCUSDLong
by Tradingstrategyguides
6
QCOM 1D RANGE LONG TRADERanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:QCOMLong
by Tradingstrategyguides
GBPJPY 1D BEAR FLAG SHORT TRADEBear Flags are a range chart pattern. Bear Flag Ranges are repeatable trading chart patterns. Bear Flag chart patterns will have a directional bias (Short Trade) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
AMD 1D RANGE TRADING BULLISH BREAKOUTRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:AMDLong
by Tradingstrategyguides
SHOP 1D BULLISH FLAG LONG TRADEBull Flags are a Range type pattern. Bull Flag Ranges are repeatable trading chart patterns. Descending Bull Flag chart patterns will have a directional bias (Long Trade) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NYSE:SHOPLong
by Tradingstrategyguides
GBPCHF 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
by Tradingstrategyguides
2
ES1! 1D BEAR FLAG SHORT TRADEBear Flags are a Range Chart Pattern. Ranges are repeatable trading chart patterns. Triangles and ranges are consolidation chart patterns that can breakout either direction. Ascending Bear Flags chart patterns will have a directional bias (Shortn Trade) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
CME_MINI:ES1!Short
by Tradingstrategyguides
2
EURGBP 1D DESCENDING TRIANGLEDescending Triangles are repeatable trading chart patterns. Descending chart patterns will have a directional bias (Short) depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
Short
by Tradingstrategyguides
6
ETCUSD 1D RANGE TRADINGRanges are repeatable trading chart patterns. Ranges are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
BINANCE:ETCUSD
by Tradingstrategyguides
LULU 1D TRIANGLE BREAKOUTTriangles are repeatable trading chart patterns. Triangles are consolidation chart patterns that can breakout either direction. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NASDAQ:LULU
by Tradingstrategyguides
1
CHEWY 1D ASCENDING TRIANGLEAscending Triangle are repeatable trading chart patterns. Ascending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
NYSE:CHWYLong
by Tradingstrategyguides
XAGUSD 1D DESCENDING TRIANGLEDescending Triangles are repeatable trading chart patterns. Descending chart patterns will have a directional bias depending on the previous incoming trend. Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern. What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart). Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place. Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement. When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern. Trade Management after there is a breakout candle close. 1 - Position size (compare volume bar to volume ma line). a - Breakout candle must be 100% of volume average for a full position size. b - If 75% of volume average then ½ position size. (To find 75% of Volume look at the charts volume settings – divide smaller # into larger # = 75%+) If not 75% then stand aside from the trade. 2 – If candle breaks out of a trendline, 15m before the close of the day prepare your buy/sell order. Enter two trades. 1st trade will have a SL & TP. It will close automatically when the 1st TP is hit. 2nd trade only has a SL and will be allowed to run. When 1st TP is hit move the SL to breakeven. Look at ATR and prepare SL at 1.5 of ATR. Prepare 1st trade TP at 1 of ATR. 3 - SL for both trades will be 1.5 x ATR. 4 - 1st trade TP will be 1 x ATR. 5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price. 6 - When 1st TP hit – move 2nd trade SL to breakeven. 7 - Adjust the 2nd trade SL to follow price. *8 – After Breakout candle – if price closes back into chart pattern close trade don't wait for SL to be hit. *9 - When breakout candle is more than 1 ATR from breakout candle open. a - Enter 1st trade at candle close with ½ position size. b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open. c – Price should pullback to that pending limit order for 2nd trade. d – If Price returns back into chart pattern close trade before SL is hit.
OANDA:XAGUSDShort
by Tradingstrategyguides
CMCSA 1D BIG 3 INDICATORBig Three Sub-Chart Indicator turned Green after the Day Candle Closed for an Entry Signal. Big Three Sub-Chart Indicator shows a Long Entry Signal when the Sub-Chart Bar turned Green after the Day Candle Closed. Big Three Indicator shows a Long Entry Signal when the Big 3 Indicator background turned Green after the Day Candle Closed Entered Long Trade at Daily Candle Close. Close Trade when Sub-ChartBar & Big 3 Indicator Line changes to Yellow or Red.
NASDAQ:CMCSALong
by Tradingstrategyguides
GOLD & THE TUESDAY NIGHT? WINS STOCK MARKET RALLY ? WINS STOCK MARKET DOWNTURN NO WINNER TONIGHT STOCK MARKET SEVERE DOWNTURN BECAUSE STOCK MARKET DOES NOT LIKE UNCERTAINTY. Descending Chart Pattern Price Bias is Bearish While gold has an inverse relationship with the dollar, stocks markets also have a deep connection to the metal. Investors commonly perceive gold as a haven in the event of a severe stock market downturn. ... Typically, stocks have a high negative correlation with the US dollar . However, gold has an opposite relationship.
OANDA:XAUUSDEducation
by Tradingstrategyguides
1
WHY DID THE BULLISH CONTINUATION MOVE FAIL?What does "End of Month Square Up" mean. A square position is a situation where a trader or portfolio has no market exposure. ... The reason for this confusion is that the term "squaring up" is used to describe settling open trades before the market closes. A square position is also referred to as a "flat position." Square position, like many trading terms, can take on a different nuance depending on the speaker. For an individual forex trader, a square position can refer to offsetting long and short positions in the same currency pair or a situation where a currency trader holds no positions in the market. The reason for this confusion is that the term "squaring up" is used to describe settling open trades before the market closes. Squaring usually refers to just a few positions, but a trader could close out all of his open positions and get out of the market. The "Market Makers" can use this trading principle as they move the market. E/U had a Bullish Trend which became a consolidated range. Price had a Bearish Breakout of the Range bottom which failed. Price created Higher Highs and Higher Low making it appear a Bullish Continuation move was happening. This drew in long traders leaving behind lots of money tied up in Stop Losses. The Market Makers can tell where the most money is tied up on the Long side or Short Side. It seems to appear that the Market Makers made the Bullish Continuation Reversal fail and took out the Stop Losses at the Higher Low entry point and also the 50% reversal entry point. All of this happening the last few days of the End of the Month of October. Could this be an example of the "END OF MONTH SQUARE UP?"
Education
by Tradingstrategyguides
SONY 1D BIG THREE SUB-CHART INDICATORBig Three Sub-Chart Indicator turned Green after the Day Candle Closed for an Entry Signal. Big Three Sub-Chart Indicator shows a Long Entry Signal when the Sub-Chart Bar turned Green after the Day Candle Closed. Big Three Indicator shows a Long Entry Signal when the Big 3 Indicator line turned Green after the Day Candle Closed Entered Long Trade at Daily Candle Close. Close Trade when Sub-ChartBar & Big 3 Indicator Line changes to Yellow or Red.
SLong
by Tradingstrategyguides