EURNZD TO BUYSame as GBPNZD of my previous idea, EURNZD is looking to become a buy as an uptrend is rising for this pair. The EUR and GBP correlates on the price pattern. Therefore, this applies to GBPNZD and EURNZD as well.
TP: 1.73 or ABOVE
ATR
AMD 1D RANGE TRADESRanges are repeatable trading chart patterns.
Ranges are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
RUSSELL 2000 INDEX BEAR FLAG SHORTBear Flags are Channel Ranges and they are repeatable trading chart patterns.
Bear Flag chart patterns will have a directional bias depending on the previous incoming trend (Short).
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
XAUUSD GOLD 1D RANGE TRADESRanges are repeatable trading chart patterns.
Ranges are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
LITECOIN 1D BEAR FLAGBear Flags are a range pattern and they are a repeatable trading chart patterns.
Bear Flag chart patterns will have a directional bias depending on the previous incoming trend (short trade).
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
S&P 500 E-MINI FUTURES BEAR FLAG SHORT TRADEBear Flags are a Range pattern which is a repeatable trading chart patterns.
Bear Flag chart patterns will have a directional bias depending on the previous incoming trend (short trade).
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
GBPJPY Bear Impulse | Structural Resistance| Range Support Evening Traders,
Today’s Analysis – GBPJPY – clear impulse bear move from resistance, next structural target is range support.
Points to consider,
- Impulse sell off
- Range mid-point (bearish retest)
- Range support target
- Oscillators overextended
GBPJPY had an impulse sell off putting in a volume climax node, marking an end to the temporary sell off.
Range mid-point has been tested with a bearish retest, failure at a second attempt will solidify the level and make the immediate target – range support.
Both oscillators are coming off from oversold conditions, breaking below 50 will signal weakness in the market.
Overall, in my opinion, price is likely to test range midpoint, failure to break will increase the probability of testing range support.
What are your thoughts?
Please leave a like and comment,
And remember,
“Where you want to be is always in control, never wishing, always trading, and always first and foremost protecting your butt.” – Paul Tudor Jones
EURUSD 1H RENKO CHARTRenko Trading Strategy #1
This profitable Renko strategy you can use is to focus only on the bricks.
No additional technical tool is required for this system.
We’re going to explore a very simple and yet very powerful Renko chart pattern that incorporates the wicks. This Renko price pattern looks for two consecutive bricks of the same color and both bricks have wicks.
The location of this Renko pattern doesn’t really matter. It can be at the end or middle of a trend. This pattern has a very high rate of success if traded in the right context. You have to look around these two brick patterns and make sure the blocks are not moving back and forth within a trading range.
If that’s not the case, then you have a green light to take the signal generated by this trade setup.
The entry is on the third brick after the two bricks that have wicks. The stop loss can be placed above the wicks and exit once a reversal pattern is produced.
Conclusion – Renko Trading Strategy
Renko bars ensure that you have a cleaner and neater representation of price action. If you’re having a hard time reading the price on a candlestick chart, maybe it’s time to look in another direction. Trading with our profitable Renko strategy can be the perfect fit for you.
We truly believe that Forex Renko charts are more suitable for traders who still struggle to analyze a candlestick chart. The Renko trading strategies presented through this trading guide are just an introduction into the world of Renko bricks. We hope you now have a clear idea of what the possibilities are by using this new charting technique.
When you’re actively trading the markets (scalping, day trading) it’s important to have a methodology to clear out the market noise. The Renko trading strategy is time-independent and gives you an eccentric way to view price action.
Even though the free Renko charts can be used across different asset classes, including cryptocurrencies our simple Renko system is designed, but not limited, to be used in the Forex market.
What are Renko Charts?
A Renko chart is a technical tool or a type of chart that is built by only using price data. Unlike the Japanese candlestick charts, which are built using price, time and volume, the Renko chart only measures price movement.
Renko has no time dimension.
Renko charts are not some long-hidden secrets dating back to feudal Japan times as some trading gurus would like you to believe. Renko bars were actually developed several decades ago.
The name Renko means brick in Japanese and comes from the word “renga.” These charts are sometimes referred to as brick charts by traders.
Steve Nison who is the father of modern candlestick charting is the man who actually made Renko charts forex known to the general public. These charts are often compared to traditional candlesticks but have some key differences. While candlestick charts have varying lengths of “wicks” throughout, Renko bricks are all the same size.
The simplified bricks found in Renko charts make it easier to read the market and make quick decisions. These charts are ideal for day traders, though they can be used by traders using any timeframe. By removing the noisier parts of the candlestick chart that apply to longer-term trading strategies, Renko charts make it possible to determine where the market is actually moving.
Every candlestick on the Renko chart is called a brick because it has the shape of a building brick. The rectangular bricks used for building walls are about the same size. The same goes with Renko charts; every brick is the same size. The size of a Renko brick is pre-determined by the user.
How to Read and Build a Renko Trading Chart
Reading a Renko chart is simple. Because the bricks have a fixed size, they can all easily be compared to one another. The color (and direction) of the Renko brick will change once the value of the previous brick has been exceeded. This indicates to traders that trends are changing and that the price is likely to swing in the opposite direction.
Each brick represents a price range (example – $0.25). However, while the bricks are evenly sized within the same graph, they can be adjusted to your trading objectives. Individuals opening and holding longer, high-cap positions will use different brick sizes than penny stock day traders.
We recommend using the average true range—or, ATR for short—in order to construct each brick. The ATR is derived from the closing price of the stock. This means that a Renko chart is a lagging indicator. In the next step, we will show you how to read Renko bars.
Note #1: if you use Renko bars with wicks or tails, then some bricks may display additional wicks either at the top or the bottom of a brick. But the brick size remains the same.
On the Tradingview charting platform you can go to Chart Settings – Style – Wick, and select which way you want the bricks to be displayed, with or without wicks.
Before returning to the Renko bricks with wicks, let’s give you the basics or the foundation of a Renko brick.
We already established that the brick size is pre-determined by the user. If you’re trading with Renko charts, and your preferred brick size is 20 pips, then bricks only form when price moved either up or down by 20 pips.
The best way to illustrate this concept is to look at Renko blocks through the eyes of the candlestick charts. In the EUR/USD 5-minute candlestick chart below, we highlighted areas of 20 pips worth of price movement.
A green Renko brick would form only after the price will advance 20 pips. Conversely, a red Renko brick would form only after the price declines 20 pips.
As you can tell, the time intervals between each brick are inconsistent.
It’s clear that Renko is less noisy and cuts through a lot of the noise between the swing low and swing highs.
Important note: When you trade with Renko charts, the price needs to travel double the price distance of your brick size in order for the Renko brick to change color.
For example, if the brick size remains 20, it means that we need to actually move 40 pips for a red brick to be printed after we had a green brick.
Let’s return for a second to why some blocks have wicks?
Trading Renko charts with wicks can be a very powerful tool in your trading arsenal. Bricks with wicks give us further clues on the battle between the bulls and the bears.
A wick is printed on a Renko brick only when there is a strong attempt to produce a reversal (a change of brick’s color from green to red and vice versa), but it fails. The wick will simply show you how many pips it went in the opposite direction.
Note #3: a wick is printed on a brick only when the price moves in the opposite direction of the previous candle by at least the length of the brick size +1.
Let’s see how you can optimize the Renko block, and how to choose the right Renko brick size.
How to choose the right Renko Brick Size?
If you don’t know what the right size for Renko charts is then, we have a solution.
If we want a dynamic reading of the price through the Renko blocks, we can use a brick size that is determined by the ATR (Average True Range). Instead of picking a random brick size, this will give you dynamic support and resistance levels that are more accurate.
The ATR will automatically detect the right brick size that is more in tune with the price action.
Note #4: The disadvantage of using an ATR based Renko chart size is that when the ATR value changes, your Renko bricks are redrawn again to reflect the new changes.
When selecting your Renko brick size, ask yourself the following questions:
What are my objectives as a trader?
What are my time constraints? What is the cost of trading?
Am I opening small positions or larger positions?
Do I consider myself risk-tolerant or risk-averse?
If you are pursuing large, lower-risk positions over longer periods of time, then it will make sense to use a larger Renko brick size. On the other hand, if you are pursuing high-risk positions that require paying close attention to volatility, then smaller bricks will be better.
BTCUSD 1D ASCENDING TRIANGLE LONG TRADEAscending TriangleS are repeatable trading chart patterns.
Ascending Triangle chart patterns will have a directional bias depending on the previous incoming trend. (Long)
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
AUDUSD 1D BEAR FLAG SHORT TRADEBear Flags are Channel Range patterns that are repeatable trading chart patterns.
Bear Flag chart patterns will have a directional bias depending on the previous incoming trend (short).
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
CRUDE OIL 1D BEAR FLAG SHORT TRADEBear Flags are a Range pattern and they are a repeatable trading chart pattern.
Bear Flag chart pattern will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of the average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
EURCAD 1D BULL FLAG LONG TRADEBull Flags are ranges that are repeatable trading chart patterns.
Bull Flag Range chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
MCDONALD'S 1D RANGE TRADES Ranges are repeatable trading chart patterns.
Ranges are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
DOW JONES 1D BEAR FLAG SHORT TRADEBear Flag are Ranges that are repeatable trading chart patterns.
Bear Flag chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
What ever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
GBPJPY 1H BEST ATR FOREX TRADING STRATEGY #3QUESTION - WHAT ARE THE BEST FOREX TRADING STRATEGIES.
#3 - BEST AVERAGE TRUE RANGE FOREX TRADING STRATEGY
Step #1: Make Sure Your Chart Setup Configuration Looks the Same as our Price Chart
The Average True Range Trading strategy has a chart configuration with two windows:
The first window should contain your favorite currency pair.
The second window should contain the ATR indicator with the 20-EMA attached to it (use the above instructions in order to overlay the 20-EMA).
Step #2: Wait for ATR Indicator to Break Above 20-EMA
A breakout in the ATR indicator reading above the 20-EMA is indicative of higher volatility to come. With higher volatility, this also means trading opportunities and bigger profits to be made. A break of the ATR line above the 20-EMA can be a great proof of a new trend.
The Average True Range Trading strategy incorporates not just the ATR volatility readings, but it also looks at the price action to confirm the increase in the ATR volatility. This brings us to the next step of the best average true range Forex strategy.
Step #3: Check the Price Chart to Ensure the ATR Breakout is Followed by a Price Breakout
After the ATR line broke above the 20-EMA we want this to be followed by a break in price as well. If we’re looking to buy, we want to see a big bullish candle relative to the previous candles popping up on the chart. If the price breaks up and is accompanied by a break higher in volatility, there is a high probability of the market to move in the same direction.
Now, all we need to establish is how to enter the trade. If we already have an idea of where the market is most likely to move. This brings us to the next step.
Step #4: Enter Long Once We Break Above the High of the Breakout Candle
Depending on your preferred time frame, you’ll have to wait until the breakout candle has been developed. Then enter long once the next candle breaks above the high of the breakout candle.
This is key to the success of the Average True Range Trading strategy. You need a big bold candle to confirm the ATR breakout. You’ll learn soon that the ATR indicator will break many times above the 20-EMA. But it won’t be confirmed by the price action in which case you don’t want to execute any trades.
The ATR indicator is a great tool to use when it comes to establishing profit targets. This brings us to the next step of our Average True Range Trading strategy.
Step #5: Your Take Profit Target Should Be Equal to the ATR Indicator Value
The ATR indicator can be of great help to determine your take profit target. This is self-explanatory because if you know how much, on average, the market is prone to move, we want to conform to this reality and have that as a target.
In our case, we can see the ATR volatility reading has a value of 26 pips.
This means our profit target should be calculated 26 pips above the high of the breakout candle. The breakout candle high is at 1.3213 and adding 26 pips to that price we end up with a profit target at 1.3240.
Add 26 pips for each TP 2, 3 & 4.
Step #6: Place the Stop Loss below the Breakout Candle Low
In trading, you have to learn to always protect your back and hide your protective stop loss at the most logical point. A break below the breakout candle low will invalidate our trade idea. This is the place where we want to hide our protective stop loss.
Note** The above was an example of a buy trade. Use the same rules – but with the only difference that you need a bearish breakout candle – for a sell trade.
Conclusion
The Average True Range Trading strategy provides you with an unorthodox approach to trading. It combines both the market volatility and the price action to provide us with the best trades possible. We hope that by now you’re sold out to the power of the ATR indicator’s ability to forecast the market with a high degree of accuracy.
CADJPY 1D RANGE TRADESRanges are repeatable trading chart patterns.
Ranges are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows a
dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
TESLA 1D ASCENDING TRIANGLE LONG BREAKOUTAscending Triangles are repeatable trading chart patterns.
Ascending chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
GBPAUD STILL ON STRONG SELL (After GBP Claimant Count Change)GBPAUD is still a sell from last week and continuing after GBP Claimant Count Change news took affect.
TP: 1.8630-1.8600
CADJPY 1D TRIANGLE BREAKOUTTriangles are repeatable trading chart patterns.
Triangles are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
USDCHF 1D TRIANGLE BREAKOUT TRADESTriangles are repeatable trading chart patterns.
Triangles are consolidation chart patterns that can breakout either direction.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of the average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
Gold Markets Continue to Build Pressure
Gold markets went back and forth during the trading session on Monday as we continue to dance around the $1700 level.
We continue to look at the $1700 level is an area that is a bit of a magnet for price. With that in mind, you should also notice that there is an uptrend line that sits just below forming part of the symmetrical triangle that the market currently sits in.
Fears of a second wave of coronavirus infections should support gold prices
Limited activities in spot markets could cap major upsides in near term as SPDR Gold Trust, the world's largest gold-backed exchange-traded fund, fell marginally to 1,081.07 tonnes on Monday.
Fresh spike in coronavirus cases in places that have eased lockdown-related restrictions such as China's Wuhan, South Korea and Germany have stoked fears of a second wave of infections. Wuhan, the epicentre of the outbreak in China, has reported its first cluster of virus infections since a lockdown on the city was lifted a month ago.
SPDR Gold Trust, the world's largest gold-backed exchange-traded fund, fell marginally to 1,081.07 tonnes on Monday.
RCL 1D ASCENDING TRIANGLE BREAKOUTAscending Triangles are repeatable trading chart patterns.
Ascending chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
PCG 1D ASCENDING TRIANGLE BREAKOUTAscending Triangle is a repeatable trading chart pattern.
Ascending chart patterns will have a directional bias depending on the previous incoming trend.
Each chart pattern will have defining trendlines of the support/resistance levels creating the pattern.
Whatever time frame you are trading this chart pattern, wait for a candle close outside of the trendline in the direction of the breakout candle. (Our time frame preference is the Daily chart).
Add volume indicator - Volume is the amount of $ that went into a particular candle or in Forex the # of trades that took place.
Add ATR indicator - Volatility is the amount of price movement that occurred. Use the ATR to measure the price movement.
When you see descending Volume bars and descending ATR line (which indicates volatility) this shows
a dis-interest in traders to invest in this pair creating consolidation which creates the chart pattern.
Trade Management after there is a breakout candle close.
1 - Position size (compare volume bar to volume ma line).
a - Breakout candle must be 100% of average volume for a full position size.
b - If 75% of average volume then ½ position size. (To find 75% of Volume
look at the charts volume settings – divide smaller # into larger # = 75%+)
2 - Enter two trades.
3 - SL for both trades will be 1.5 x ATR.
4 - 1st trade TP will be 1 x ATR.
5 - No TP on 2nd trade – letting profit run and adjusting SL to follow price.
6 - When 1st TP hit – move 2nd trade SL to breakeven.
7 - Adjust the 2nd trade SL to follow price.
*8 – After Breakout candle – if price closes back into chart pattern close trade
*9 - When breakout candle is more than 1 ATR from breakout candle open.
a - Enter 1st trade at candle close with ½ position size.
b - Enter 2nd trade with a pending limit order that is 1 ATR of breakout candle open.
c – Price should pullback to that pending limit order for 2nd trade.
d – If Price returns back into chart pattern close trade before SL is hit.
