Get started

ADX

ADX-DI MTF trend buffer - JDThe indicator gives a multiplication of ADX and the DI+ and DI-values, color coded for bullish or bearish momentum the indicator was optimised for use with HA-candles, but works with regular candles as well and shows general market direction en divergence in a simpler visual way than the normal ADX-DI lines a threshold mask can be shown or omitted as preferred version 3. the indicator is now plotted relative to the 200 ema and can be seen as a "buffer" against price reversal The timeframe of the indicator can be the current one or custom selected but gives better visual information if a longer timeframe than the current one is used. The colors can be changed to fit with "Dark mode" or "Light mode" a scaling option is available to downscale the trend indication relative to the price bars JD
Pine Script™ indicator
by Duyck
1
Average Directional Index with DI SpreadThis indicator converts conventional triple lined ADX, DI+ and DI- into two lines. First line is the original ADX line and second line is obtained by subtracting DI- from DI+ which named DI Spread(DIS) If ADX is greater than 20 there is a trend and if greater than 40 there is a strong trend but ADX does not tell the trend direction To determine trend direction, DIS can be used with ADX; Sımply; If DIS is greater than 0, it is an uptrend and If DIS is less than 0, it is a downtrend. To sum up; If ADX is greater than 20 and especially greater than 40 with positive DIS value, this implies an uptrend. If ADX is greater than 20 and especially greater than 40 with negative DIS value, this implies a downtrend. *Because of coloration and reference levels used, this indicator is really simple and efficient to analyze trend direction.
Pine Script™ indicator
by gknpytr22
2
ADX-DI trend indication - JDThis indicator is based on the formulas in the original "ADX and DI" script of Masa Nakamuro The indicator gives a multiplication of ADX and the DI+ and DI-values, color coded for bullish or bearish momentum. The indicator was optimised for use with HA-candles, but works with regular candles as well and shows general market direction en divergence in a simpler visual way than the normal ADX-DI lines. A threshold mask and the actual DI-lines kan be shown or omitted as preferred JD.
Pine Script™ indicator
by Duyck
2
ADX-DI trend indication - JDThis indicator is based on the formulas in the original "ADX and DI" script of Masa Nakamuro The indicator gives a multiplication of ADX and the DI+ and DI- values, color coded for bullish or bearish momentum. The indicator was optimised for use with HA-candles, but works with regular candles as well and shows general market direction en divergence in a simpler visual way than the normal ADX-DI lines. A threshold mask and the actual DI-lines kan be shown or omitted as preferred JD.
Pine Script™ indicator
by Duyck
1
ADX and DI (Average Directional Index) - CORRECT FORMULASo... the popular version of "ADX and DI" shown on tradingview by masanakamura uses some wacky and incorrect formula for DI and uses SMA instead of the Wilder's MA that ADX/DI is supposed to use, and doesn't give the correct ADX and DI values. The Tradingview "Average Directional Index" uses the correct calculation but doesn't show DI+ and DI-. So, here it is with the DI+ and DI- visible. Enjoy!
Pine Script™ indicator
by cryptographic1
15
Range Action Verification Index (RAVI) Backtest The indicator represents the relative convergence/divergence of the moving averages of the financial asset, increased a hundred times. It is based on a different principle than the ADX. Chande suggests a 13-week SMA as the basis for the indicator. It represents the quarterly (3 months = 65 working days) sentiments of the market participants concerning prices. The short moving average comprises 10% of the one and is rounded to seven. You can change long to short in the Input Settings WARNING: - For purpose educate only - This script to change bars colors.
Pine Script™ strategy
by HPotter
Range Action Verification Index (RAVI) Strategy The indicator represents the relative convergence/divergence of the moving averages of the financial asset, increased a hundred times. It is based on a different principle than the ADX. Chande suggests a 13-week SMA as the basis for the indicator. It represents the quarterly (3 months = 65 working days) sentiments of the market participants concerning prices. The short moving average comprises 10% of the one and is rounded to seven. WARNING: - This script to change bars colors.
Pine Script™ indicator
by HPotter
[naoligo] Simple ADXI'm publishing this indicator just for study purposes, because the result is exactly the same as DMI without the smoothing factor. It is exactly the same as ADX Wilder from MT5. I was looking for the algorithm all over and it was a pain to find the right formula, meaning: one that would match with the built-in ones. After several study and comparison, I still didn't find the algorithm that match with the MT5's built-in simple ADX ... Enjoy!
Pine Script™ indicator
by naoligo
3
KK_Average Directional Index (ADX) Higher TFHey guys, sometimes you just want to plot an Indicator value from a higher Timeframe on your Chart. For most Indicators this is pretty straightforward however there is one Indicator that has been giving me quite a headache while trying to do this: The Average Directional Index . Anyway after going through almost 200 versions of this script I finally found a solution that works and thought I would share this with you, since I'm sure some of you have encountered the same problem. How it works Go to your desired Instrument/Timeframe and add the Script Under Settings in the field for "Higher ADX TF" put the Timeframe-code you want to pull the ADX Values from. - Codes: Monthly - M, Weekly W, Daily - D - Codes Intraday: The amount of hours in minutes, e.g. if you want to pull values from the 4h-Chart the code is 240 (60 for 1h, 15 for 15m ...) In some cases (see below) the calculation might not be correct. So make sure the values are correct: a) Write down the latest ADX of the higher TF while you are on the lower TF b) Switch the Resolution to the higher TF c) Compare the value you have just written down to the next to last value. They should be the same. d) Switch back the Resolution to the lower TF and you're good to go. Limitations You can only pull values from higher Timeframes, e.g. you're on a 4h Chart, so you can only pull values from the Daily, Weekly and Monthly Chart. You can't pull values from the 1h Chart. You can only pull values from Timeframes, where the higher Timeframe Close always has a corresponding Close on the lower Timeframe, e.g. you can't pull values from the 3h Chart when you are on a 2h Chart. This should be pretty rare. The Script needs a certain amount of Data from the Higher TF before the calculated values are correct. I have tested this on several Instruments and the Script usually needs approximately 100 Bars on the higher Timeframe (often less) for the values to be correct (error < 1%). So when the difference between your lower Timeframe and you higher Timeframe is large, e.g. you want to pull the Daily ADX value on a 15m-Chart, the calculation can be wrong. This can lead to errors in 2 Cases: a) Backtesting: When you go over old data and get close to the last available Bar the Data will be wrong. This will limit the amount of data you can backtest. b) Live values: When the difference between the two Timeframes is too large, it is possible that even live values are wrong, e.g. this will be the case when you are trying to pull the Daily ADX value on a 5 minute Chart. Always check if the calculation works with your desired combination of Timeframes before using it (see above). I hope this is useful for you and whish all of you successful trading! Best regards Kurbelklaus
Pine Script™ indicator
by Kurbelklaus
1
Directional Trend Index (DTI) This technique was described by William Blau in his book "Momentum, Direction and Divergence" (1995). His book focuses on three key aspects of trading: momentum, direction and divergence. Blau, who was an electrical engineer before becoming a trader, thoroughly examines the relationship between price and momentum in step-by-step examples. From this grounding, he then looks at the deficiencies in other oscillators and introduces some innovative techniques, including a fresh twist on Stochastics. On directional issues, he analyzes the intricacies of ADX and offers a unique approach to help define trending and non-trending periods. Directional Trend Index is an indicator similar to DM+ developed by Welles Wilder. The DM+ (a part of Directional Movement System which includes both DM+ and DM- indicators) indicator helps determine if a security is "trending." William Blau added to it a zeroline, relative to which the indicator is deemed positive or negative. A stable uptrend is a period when the DTI value is positive and rising, a downtrend when it is negative and falling. You can change long to short in the Input Settings Please, use it only for learning or paper trading. Do not for real trading
Pine Script™ strategy
by HPotter
2
Directional Trend Index (DTI) Strategy This technique was described by William Blau in his book "Momentum, Direction and Divergence" (1995). His book focuses on three key aspects of trading: momentum, direction and divergence. Blau, who was an electrical engineer before becoming a trader, thoroughly examines the relationship between price and momentum in step-by-step examples. From this grounding, he then looks at the deficiencies in other oscillators and introduces some innovative techniques, including a fresh twist on Stochastics. On directional issues, he analyzes the intricacies of ADX and offers a unique approach to help define trending and non-trending periods. Directional Trend Index is an indicator similar to DM+ developed by Welles Wilder. The DM+ (a part of Directional Movement System which includes both DM+ and DM- indicators) indicator helps determine if a security is "trending." William Blau added to it a zeroline, relative to which the indicator is deemed positive or negative. A stable uptrend is a period when the DTI value is positive and rising, a downtrend when it is negative and falling.
Pine Script™ indicator
by HPotter
1
ADX Color Easy [Dravya]Script #1 So, here is my first script. This is the normal 14 period ADX, but with a color twist, to make it extremely easy on eyes. and then, easily spot the strength. ADX, as you know, shows the strength of the trend. As short term traders, we need price movement and a strong trend. How to use this script ? 1. We don't trade when ADX is in the red zone (0-20) 2. We get ready for trading when it enters the blue zone (20-30) 3. We trade when the ADX enters the green zone (>30) Simple, right ! Now, in the green zone, in which direction you should trade? Here are a few links, to help you use ADX as a strategy , www.tradingsetupsreview.com www.babypips.com Other than this, you can combine this with your own strategies. Personally, I like to use it on stocks on 1H timeframe. Thanks. Would love to hear from you. Please like it to support the project, and help spread it.
Pine Script™ indicator
by dravya
7
Forex Master v4.0 (EUR/USD Mean-Reversion Algorithm)DESCRIPTION Forex Master v4.0 is a mean-reversion algorithm currently optimized for trading the EUR/USD pair on the 5M chart interval. All indicator inputs use the period's closing price and all trades are executed at the open of the period following the period where the trade signal was generated. There are 3 main components that make up Forex Master v4.0: I. Trend Filter The algorithm uses a version of the ADX indicator as a trend filter to trade only in certain time periods where price is more likely to be range-bound (i.e., mean-reverting). This indicator is composed of a Fast ADX and a Slow ADX, both using the same look-back period of 50. However, the Fast ADX is smoothed with a 6-period EMA and the Slow ADX is smoothed with a 12-period EMA. When the Fast ADX is above the Slow ADX, the algorithm does not trade because this indicates that price is likelier to trend, which is bad for a mean-reversion system. Conversely, when the Fast ADX is below the Slow ADX, price is likelier to be ranging so this is the only time when the algorithm is allowed to trade. II. Bollinger Bands When allowed to trade by the Trend Filter, the algorithm uses the Bollinger Bands indicator to enter long and short positions. The Bolliger Bands indicator has a look-back period of 20 and a standard deviation of 1.5 for both upper and lower bands. When price crosses over the lower band, a Long Signal is generated and a long position is entered. When price crosses under the upper band, a Short Signal is generated and a short position is entered. III. Money Management Rule 1 - Each trade will use a limit order for a fixed quantity of 50,000 contracts (0.50 lot). The only exception is Rule Rule 2 - Order pyramiding is enabled and up to 10 consecutive orders of the same signal can be executed (for example: 14 consecutive Long Signals are generated over 8 hours and the algorithm sends in 10 different buy orders at various prices for a total of 350,000 contracts). Rule 3 - Every order will include a bracket with both TP and SL set at 50 pips (note: the algorithm only closes the current open position and does not enter the opposite trade once a TP or SL has been hit). Rule 4 - When a new opposite trade signal is generated, the algorithm sends in a larger order to close the current open position as well as open a new one (for example: 14 consecutive Long Signals are generated over 8 hours and the algorithm sends in 10 different buy orders at various prices for a total of 350,000 contracts. A Short Signal is generated shortly after the 14th Long Signal. The algorithm then sends in a sell order for 400,000 contracts to close the 350,000 contracts long position and open a new short position of 50,000 contracts).
Pine Script™ strategy
by Stable_Camel
16