Get started

Automation

THE PHOENIX v0.1 wSMDAS requested - Version of my Phoenix Script with both LONG and SHORTS, Backtest results will not be accurate unless you use margin trading. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Implementation in TradingView of modified version of the "Weis Wave". indicatior will generate Long and Close Long signals according to market trend. (Learned the hard way that using short instead of close long to close long orders will seriously mess backtest results and create unrealistic expectations) Added a customizable RATE OF CHANGE indicator that I called SMD (sideways market detection) to try and avoid trading on sideways market. References: "Trades About To Happen" David H. Weis, Division 2 of the Richard D. Wyckoff Method of Trading in Stocks. I've had best results on 2h and 4h charts, I would not recommend to go below 1h, my general rule is to run the backtest on regular candle and make sure the backtest gives goodd result, but I use the script with autoview on heikin ashi. Backtesting: You can change the dates of the backtest as you please, the backtest runs with 1000USD and 100% of equity orders, 3 ticks slippage and 0.1% commission. For Autoview users: Will upload LONG ALERT and CLOSE LONG ALERT studies separately as I find it easier to see whats going on on 2 seperate indicators. NO, IT DOES NOT REPAINT.
Pine Script™ strategy
by Project18
1
THE PHOENIX v0.2 wSMDThis is my first publication, since sept 2018 i tested/converted to strategy over 500 scripts, this is by far my most profitable script. Implementation in TradingView of modified version of the "Weis Wave". indicatior will generate Long and Close Long signals according to market trend. (Learned the hard way that using short instead of close long to close long orders will seriously mess backtest results and create unrealistic expectations) Added a customizable RATE OF CHANGE indicator that I called SMD (sideways market detection) to try and avoid trading on sideways market. References: "Trades About To Happen" David H. Weis, Division 2 of the Richard D. Wyckoff Method of Trading in Stocks. I've had best results on 2h and 4h charts, I would not recommend to go below 1h, my general rule is to run the backtest on regular candle and make sure the backtest gives goodd result, but I use the script with autoview on heikin ashi. Backtesting: You can change the dates of the backtest as you please, the backtest runs with 1000USD and 100% of equity orders, 3 ticks slippage and 0.1% commission. For Autoview users: Will upload LONG ALERT and CLOSE LONG ALERT studies separately as I find it easier to see whats going on on 2 seperate indicators. NO, IT DOES NOT REPAINT.
Pine Script™ strategy
by Project18
7
MP ZeroLag EMANew script based on zlema. Hopefully responds better tot ake advantage of margin trading. As usual, commands for both spot trading and margin trading are included, just need to comment or uncomment (using // ) which you prefer. They are just labels so both work in the same way (long/buy, short/sell). Also added some flair to pretty it up a bit, and yes, those divergences are in fact functional, but not really part of the script (disclosure- the divergences are taken from DonovanWall's ideas, full credit here). There is a "new stuff" section, which you CAN use, but right now it was for art and introduced way too many functions at once to be of any use, but feel free to explore as an Easter Egg :) Autoview friendly in design :) As usual, all proceeds go to the betterment of these scripts as well as my upcoming surgery (Carpel Tunnel Syndrome, yuck) 1Dsg49Zt2FQ9BnUHrmXQwvhL5dd3teqa7g ltc addy- LYUpgsHSHnKeYdNaj9bu9prK4QsnJXEQtP pinkcoin addy- 2PoeXyAk3rF9FmMC8azme2mGzMYsEiZ5eS
Pine Script™ strategy
by pocketlint
3
Moving Average Cross and/or Bbands botHello TradingView and world! This is one of our latest concepts for an actual bot builder. This script comes with a bunch of features that we're hoping will alleviate a lot of the stress and confusion around using and building strategies here on TV. Especially if the end-goal is to automate the strategies using Autoview. This is a combination of 2 strategies, and gives you full control of each component within the script. The 2 strategies are: 2 Moving Averages == if close is greater than moving average and moving average 1 is greater than moving average 2 Bolling Bands == if close is less than lower or greater than upper Features / Settings included : - Ability to change settings from a commodity market (default) to an altcoin or forex market. - Backtest time period selector component - Heiken Ashi Candles on/off - Moving Average Strategy on/off - Bollinger Bands Strategy on/off - Both Moving Average settings can be adjusted - Bollinger Bands length and multiplier can be adjusted. - Pyramiding Greater Than, Equal To, or Less Than - Trailing Stop with the ability to set a price in which the Trailing Stop activate - Take Profit on/off and editable - Stop Loss on/off and editable - Margin Call on/off dependent on Leverage which is editable - If pyramiding is used, the strategy will calculate and display your average on the chart - Profit and Loss visuals added to the chart You can watch a video here on how all the settings can be used and work together. www.youtube.com You can learn more about Autoview here: autoview.with.pink Get your invite and join us in slack here: slack.with.pink
Pine Script™ strategy
by CryptoRox
30
How to automate this strategy for free... Version 2Hello fellow traders and automation lovers. It has been about 2 years since we originally created Autoview to connect your exchanges/brokers with your TradingView alerts. We've since added multiple exchanges, parameters and have built a large community filled with awesome, passionate traders. One of the first strategies we built was sadly not a viable one for trading due to it using built-in variables that resulted in the backtest results being inaccurate in comparison to placing live trades. Luckily, we did not encounter repainting until a few strategies in, however, there was a point where we published a few of them as well. We will be going through all of our scripts again to not only eliminate any repainting and update to version 3, but to also include all the code snippets that we've learned to use over the years that allow for accurate backtesting and live trading. The first script we are redoing is our How to automate this strategy for free using a chrome extension. . Easter egg: This includes a new snippet of code that makes controlling how many orders you pyramid within a study fast and easy. We look forward to bringing all of our scripts and delving deep into Pine again :) Happy Trading Autoview
Pine Script™ strategy
by CryptoRox
5
MACD, backtest 2015+ only, cut in half and doubledThis is only a slight modification to the existing "MACD Strategy" strategy plugin! found the default MACD strategy to be lacking, although impressive for its simplicity. I added "year>2014" to the IF buy/sell conditions so it will only backtest from 2015 and beyond ** . I also had a problem with the standard MACD trading late, per se. To that end I modified the inputs for fast/slow/signal to double. Example: my defaults are 10, 21, 10 so I put 20, 42, 20 in. This has the effect of making a 30min interval the same as 1 hour at 10,21,10. So if you want to backtest at 4hr, you would set your time interval to 2hr on the main chart. This is a handy way to make shorter time periods more useful even regardless of strategy/testing, since you can view 15min with alot less noise but a better response. Used on BTCCNY OKcoin, with the chart set at 45 min (so really 90min in the strategy) this gave me a percent profitable of 42% and a profit factor of 1.998 on 189 trades. Personally, I like to set the length/signals to 30,63,30. Meaning you need to triple the time, it allows for much better use of shorter time periods and the backtests are remarkably profitable. (i.e. 15min chart view = 45min on script, 30min= 1.5hr on script) ** If you want more specific time periods you need to try plugging in different bar values: replace "year" with "n" and "2014" with "5500". The bars are based on unix time I believe so you will need to play around with the number for n, with n being the numbers of bars.
Pine Script™ strategy
by RyanMartin
5
How to automate this strategy for free using a chrome extension.Hey everyone, Recently we developed a chrome extension for automating TradingView strategies using the alerts they provide. Initially we were charging a monthly fee for the extension, but we have now decided to make it FREE for everyone. So to display the power of automating strategies via TradingView, we figured we would also provide a profitable strategy along with the custom alert script and commands for the alerts so you can easily cut and paste to begin trading for profit while you sleep. Step 1: You are going to need to download the Chrome Extension called AutoView. You can get the extension for free by following this link: bit.ly ( I had to shorten the link as it contains Google and TV automatically converts it to a symbol) Step 2: Go to your chrome extension page, and under the new extension you'll see a "settings" button. In the setting you will have to connect and give permission to the exchange 1broker allowing the extension to place your orders automatically when triggered by an alert. Step 3: Setup the strategy and custom script for the alerts in TradingView. The attached script is the strategy, you can play with the settings yourself to try and get better numbers/performance if you please. This following script is for the custom alerts: //@version=2 study("4All-Alert", shorttitle="Alerts") src = close len = input(4, minval=1, title="Length") up = rma(max(change(src), 0), len) down = rma(-min(change(src), 0), len) rsi = down == 0 ? 100 : up == 0 ? 0 : 100 - (100 / (1 + up / down)) rsin = input(5) sn = 100 - rsin ln = 0 + rsin short = crossover(rsi, sn) ? 1 : 0 long = crossunder(rsi, ln) ? 1 : 0 plot(long, "Long", color=green) plot(short, "Short", color=red) Now that you have the extension installed, the custom strategy and alert scripts in place, you simply need to create the alerts. To get the alerts to communicate with the extension properly, there is a specific syntax that you will need to put in the message of the alert. You can find more details about the syntax here : gist.github.com For this specific strategy, I use the Alerts script, long/short greater than 0.9 on close. In the message for a long place this as your message: Long c=order b=short c=position b=short l=200 t=market b=long q=0.01 l=200 t=market tp=13 sl=25 and for the short... Short c=order b=long c=position b=long l=200 t=market b=short q=0.01 l=200 t=market tp=13 sl=25 If you'll notice in my above messages, compared to the strategy my tp and sl (take profit and stop loss) vary by a few pips. This is to cover the market opens and spread on 1broker. You can change the tp and sl in the strategy to the above and see that the overall profit will not vary much at all. I hope this all makes sense and it is enough to not only make some people money, but to show the power of coming up with your own strategy and automating it using TradingView alerts and the free Chrome Extension AutoView. ps. I highly recommend upgrading your TradingView account so you have access to back testing and multiple alerts. There is really no reason you won't cover the cost and then some on a monthly basis using the tools provided. Best of luck and happy trading. Note: The extension currently allows for automation on 2 exchanges; 1broker and Okcoin. If you do not have accounts there, we'd appreciate you signing up using our referral links. www.okcoin.com 1broker.com
Pine Script™ strategy
by CryptoRox
110