Get started

Bands and Channels

Ichimoku MA BandsThis indicator is based on the price average of the Ichimoku Strategy taking into account the last twenty five bars. The blue band represents an upward momentum whereas the white band represents a downward momentum. The red line is the 50 EMA which is used as a dynamic support resistance level for this strategy. This indicator also has alerts that can be enabled by the user. Disclaimer : The current script should be used in confluence with other trading strategies and not in isolation. The scripts works best on 5M and 15M Timeframes and should be used with caution on lower timeframes. This indicator is not intended to give exact entry or exit points for a trade but to provide a general idea of the trend & determine a good range for entering or exiting the trade. Please DYOR Credit & References : This script uses the default technical analysis reference library provided by PineScript (denoted as ta)
Pine Script™ indicator
by Degen_Crypto
2
Combined Indicator by rocky vermaThe combined indicator you've provided consists of three different indicator logics. Here's how to use it: 1. **Indicator 1: Trend Trader AVR Strategy** - This indicator is based on the Trend Trader AVR Strategy. - It uses three input parameters: `Length1`, `LengthMA1`, and `Multiplier1`. - The indicator plots a moving average (`nResMA1`) and changes the bar color based on certain conditions. - The conditions for changing the bar color are defined in the `pos1` variable. 2. **Indicator 2: HYE Trend Hunter** - This indicator is based on the HYE Trend Hunter strategy. - It uses various input parameters such as `slowtenkansenPeriod`, `slowkijunsenPeriod`, `fasttenkansenPeriod`, and `fastkijunsenPeriod`. - The logic of this indicator is not fully provided in your code snippet, but it seems to calculate various values related to the HYE Trend Hunter strategy. 3. **Indicator 3: Phenom** - This indicator provides EMA (Exponential Moving Average) lines with different lengths. - It allows you to configure whether to display EMA lines and their colors. - Additionally, it provides options to display stop loss levels based on ATR (Average True Range). To use this combined indicator: - Apply it to a chart in TradingView by copying the entire code snippet and pasting it into the Pine Script editor. - Configure the input parameters for each of the three indicator logics as desired. You can adjust the input values in the indicator's settings panel on the chart. - You can also modify the indicator's appearance by changing the plot colors or turning on/off specific components. - Once you have configured the input parameters and appearance settings to your liking, you can then interpret the signals and information provided by the three indicator logics on the chart. Keep in mind that this is a basic combination of the three indicators you provided, and it may require further customization to meet your specific trading strategy and preferences. Additionally, ensure you thoroughly understand the strategies and conditions used by each of the indicators to make informed trading decisions.
Pine Script™ indicator
by chhatrapalv73
1
TrendCylinder (Expo)█ Overview The TrendCylinder is a dynamic trading indicator designed to capture trends and volatility in an asset's price. It provides a visualization of the current trend direction and upper and lower bands that adapt to volatility changes. By using this indicator, traders can identify potential breakouts or support and resistance levels. While also gauging the volatility to generate trading ranges. The indicator is a comprehensive tool for traders navigating various market conditions by providing a sophisticated blend of trend-following and volatility-based metrics. █ How It Works Trend Line: The trend line is constructed using the closing prices with the influence of volatility metrics. The trend line reacts to sudden price changes based on the trend factor and step settings. Upper & Lower Bands: These bands are not static; they are dynamically adjusted with the calculated standard deviation and Average True Range (ATR) metrics to offer a more flexible, real-world representation of potential price movements, offering an idea of the market's likely trading range. █ How to Use Identifying Trends The trend line can be used to identify the current market trend. If the price is above the trend line, it indicates a bullish trend. Conversely, if the price is below the trend line, it indicates a bearish trend. Dynamic Support and Resistance The upper and lower bands (including the trend line) dynamically change with market volatility, acting as moving targets of support and resistance. This helps set up stop-loss or take-profit levels with a higher degree of accuracy. Breakout vs. Reversion Strategies Price movements beyond the bands could signify strong trends, making it ideal for breakout strategies. Fakeouts If the price touches one of the bands and reverses direction, it could be a fakeout. Traders may choose to trade against the breakout in such scenarios. █ Settings Volatility Period: Defines the look-back period for calculating volatility. Higher values adapt the bands more slowly, whereas lower values adapt them more quickly. Trend Factor: Adjusts the sensitivity of the trend line. Higher values produce a smoother line, while lower values make it more reactive to price changes. Trend Step: Controls the pace at which the trend line adjusts to sudden price movements. Higher values lead to a slower adjustment and a smoother line, while lower values result in quicker adjustments. ----------------- Disclaimer The information contained in my Scripts/Indicators/Ideas/Algos/Systems does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs. My Scripts/Indicators/Ideas/Algos/Systems are only for educational purposes!
Pine Script™ indicator
by Zeiierman
13
Volume Based RSI with ADXThe RSI indicator is a powerful tool that utilizes both volume and time to determine market trends. When there is a low volume of trades in a short period of time, but the trading activity is high, it is considered bullish or bearish. In the case of a bullish trend, the RSI indicator will display a green color, while a bearish trend will be represented by a red color. If there is no trading activity, the indicator will display a gray color. Additionally, if the ADX level meets the threshold level, the indicator will display a blue color. However, if the ADX level does not meet the threshold level, the indicator will revert back to displaying a gray color.
Pine Script™ indicator
by noufalbinjalal
Z-Score Based Momentum Zones with Advanced Volatility ChannelsThe indicator "Z-Score Based Momentum Zones with Advanced Volatility Channels" combines various technical analysis components, including volatility, price changes, and volume correction, to calculate Z-Scores and determine momentum zones and provide a visual representation of price movements and volatility based on multi timeframe highest high and lowest low values. Note: THIS IS A IMPROVEMNT OF "Multi Time Frame Composite Bands" INDICATOR OF MINE WITH MORE EMPHASIS ON MOMENTUM ZONES CALULATED BASED ON Z-SCORES Input Options look_back_length: This input specifies the look-back period for calculating intraday volatility. correction It is set to a default value of 5. lookback_period: This input sets the look-back period for calculating relative price change. The default value is 5. zscore_period: This input determines the look-back period for calculating the Z-Score. The default value is 500. avgZscore_length: This input defines the length of the momentum block used in calculations, with a default value of 14. include_vc: This is a boolean input that, if set to true, enables volume correction in the calculations. By default, it is set to false. 1. Volatility Bands (Composite High and Low): Composite High and Low: These are calculated by combining different moving averages of the high prices (high) and low prices (low). Specifically: a_high and a_low are calculated as the average of the highest (ta.highest) and lowest (ta.lowest) high and low prices over various look-back periods (5, 8, 13, 21, 34) to capture short and long-term trends. b_high and b_low are calculated as the simple moving average (SMA) of the high and low prices over different look-back periods (5, 8, 13) to smooth out the trends. high_c and low_c are obtained by averaging a_high with b_high and a_low with b_low respectively. IDV Correction Calulation : In this script the Intraday Volatility (IDV) is calculated as the simple moving average (SMA) of the daily high-low price range divided by the closing price. This measures how much the price fluctuates in a given period. Composite High and Low with Volatility: The final c_high and c_low values are obtained by adjusting high_c and low_c with the calculated intraday volatility (IDV). These values are used to create the "Composite High" and "Composite Low" plots. Composite High and Low with Volatility Correction: The final c_high and c_low values are obtained by adjusting high_c and low_c with the calculated intraday volatility (IDV). These values are used to create the "Composite High" and "Composite Low" plots. 2. Momentum Blocks Based on Z-Score: Relative Price Change (RPC): The Relative Price Change (rpdev) is calculated as the difference between the current high-low-close average (hlc3) and the previous simple moving average (psma_hlc3) of the same quantity. This measures the change in price over time. Additionally, std_hlc3 is calculated as the standard deviation of the hlc3 values over a specified look-back period. The standard deviation quantifies the dispersion or volatility in the price data. The rpdev is then divided by the std_hlc3 to normalize the price change by the volatility. This normalization ensures that the price change is expressed in terms of standard deviations, which is a common practice in quantitative analysis. Essentially, the rpdev represents how many standard deviations the current price is away from the previous moving average. Volume Correction (VC): If the include_vc input is set to true, volume correction is applied by dividing the trading volume by the previous simple moving average of the volume (psma_volume). This accounts for changes in trading activity. Volume Corrected Relative Price Change (VCRPD): The vcrpd is calculated by multiplying the rpdev by the volume correction factor (vc). This incorporates both price changes and volume data. Z-Scores: The Z-scores are calculated by taking the difference between the vcrpd and the mean (mean_vcrpd) and then dividing it by the standard deviation (stddev_vcrpd). Z-scores measure how many standard deviations a value is away from the mean. They help identify whether a value is unusually high or low compared to its historical distribution. Momentum Blocks: The "Momentum Blocks" are essentially derived from the Z-scores (avgZScore). The script assigns different colors to the "Fill Area" based on predefined Z-score ranges. These colored areas represent different momentum zones: Positive Z-scores indicate bullish momentum, and different shades of green are used to fill the area. Negative Z-scores indicate bearish momentum, and different shades of red are used. Z-scores near zero (between -0.25 and 0.25) suggest neutrality, and a yellow color is used.
Pine Script™ indicator
by federalTacos5392b
Bitcoin to GOLD [presentTrading]**Introduction and How it is Different** Unlike traditional indicators, the BTGR offers a unique perspective on market sentiment and asset valuation by juxtaposing two seemingly disparate assets: Bitcoin, the digital gold, and Gold, the traditional store of value. This article introduces an advanced version of this ratio, complete with upper and lower bands calculated using standard deviations. These bands add an extra layer of analytical depth, allowing for more nuanced trading strategies. BTCUSD 12h bigger picture **Economic Principles** The BTGR is rooted in the economic principles of asset valuation and market sentiment. Gold has long been considered a safe haven asset, a place where investors park their money during times of economic uncertainty. Bitcoin, on the other hand, is often viewed as a high-risk, high-reward investment. By comparing the two, the BTGR provides insights into the broader market sentiment. - Risk Appetite: A high BTGR indicates a bullish sentiment towards riskier assets like Bitcoin. - Market Uncertainty: A low BTGR suggests a bearish sentiment and a flight to the safety of Gold. - Asset Diversification: The BTGR can be used as a tool for portfolio diversification, helping investors balance risk and reward. **How to Use It** Setting Up the Indicator - Platform: The indicator is designed for use on TradingView. - Time Frame: A 480-minute time frame is recommended for more accurate signals. - Parameters: The moving average is set at 200 periods, and the standard deviation is calculated over the same period. **Trading Signal** Long Entry: Consider going long when the BTGR crosses above the upper band. Short Entry: Consider going short when the BTGR crosses below the lower band. Note: Due to the issue that the number of trading is less than about 100 times, the corresponding strategy is not allowed to publish.
Pine Script™ indicator
by PresentTrading
1
Gaussian RibbonThe Gaussian Ribbon utilizes two "Arnaud Legoux" moving averages with the same length to identify changes in trend direction. The plotted channel consists of two lines, one based on the default offset and sigma values, and the other with slightly adjusted customizable parameters. ALMA is a type of moving average that is related to the Gaussian function through its mathematical formula and the concept of weighted averages. The ALMA is designed to reduce lag in moving averages and provide more timely responses to price changes. It achieves this by applying a Gaussian distribution (bell-shaped curve) as a weighting function to the price data. The Gaussian function is used to calculate the weights in the ALMA formula. These weights give more importance to recent price data while gradually reducing the influence of older data points. This results in a smoother and more responsive moving average. In summary, the Gaussian Ribbon uses the offset and power of the second ALMA to create a lag that still calculates using the same length.
Pine Script™ indicator
by NantzOS
2
Robust Bollinger Bands with Trend StrengthThe "Robust Bollinger Bands with Trend Strength" indicator is a technical analysis tool designed assess price volatility, identify potential trading opportunities, and gauge trend strength. It combines several robust statistical methods and percentile-based calculations to provide valuable information about price movements with Improved Resilience to Noise while mitigating the impact of outliers and non-normality in price data. Here's a breakdown of how this indicator works and the information it provides: Bollinger Bands Calculation: Similar to traditional Bollinger Bands, this indicator calculates the upper and lower bands that envelop the median (centerline) of the price data. These bands represent the potential upper and lower boundaries of price movements. Robust Statistics: Instead of using standard deviation, this indicator employs robust statistical measures to calculate the bands (spread). Specifically, it uses the Interquartile Range (IQR), which is the range between the 25th percentile (low price) and the 75th percentile (high price). Robust statistics are less affected by extreme values (outliers) and data distributions that may not be perfectly normal. This makes the bands more resistant to unusual price spikes. Median as Centerline: The indicator utilizes the median of the chosen price source (either HLC3 or VWMA) as the central reference point for the bands. The median is less affected by outliers than the mean (average), making it a robust choice. This can help identify the center of price action, which is useful for understanding whether prices are trending or ranging. Trend Strength Assessment: The indicator goes beyond the standard Bollinger Bands by incorporating a measure of trend strength. It uses a robust rank-based correlation coefficient to assess the relationship between the price source and the bar index (time). This correlation coefficient, calculated over a specified length, helps determine whether a trend is strong, positive (uptrend), negative (down trend), or non-existent and weak. When the rank-based correlation coefficient shifts it indicates exhaustion of a prevailing trend. Trend Strength" indicator is designed to provide statistically valid information about trend strength while minimizing the impact of outliers and data distribution characteristics. The parameter choices, including a length of 14 and a correlation threshold of +/-0.7, considered to offer meaningful insights into market conditions and statistical validity (p-value ,0.05 statistically significant). The use of rank-based correlation is a robust alternative to traditional Pearson correlation, especially in the context of financial markets. Trend Fill: Based on the robust rank-based correlation coefficient, the indicator fills the area between the upper and lower Bollinger Bands with different colors to visually represent the trend strength. For example, it may use green for an uptrend, red for a down trend, and a neutral color for a weak or ranging market. This visual representation can help traders quickly identify potential trend opportunities. In addition the middle line also informs about the overall trend direction of the median.
Pine Script™ indicator
by federalTacos5392b
2
Williams %R with EMA'sThe provided Pine Script code presents a comprehensive technical trading strategy on the TradingView platform, incorporating the Williams %R indicator, exponential moving averages (EMAs), and upper bands for enhanced decision-making. This strategy aims to help traders identify potential buy and sell signals based on various technical indicators, thereby facilitating more informed trading decisions. The key components of this strategy are as follows: **Williams %R Indicator:** The Williams %R, also known as the "Willy," is a momentum oscillator that measures overbought and oversold conditions. In this code, the Williams %R is calculated with a user-defined period (default 21) and smoothed using an exponential moving average (EMA). **Exponential Moving Averages (EMAs):** Two EMAs are computed on the Williams %R values. The "Fast" EMA (default 8) responds quickly to price changes, while the "Slow" EMA (default 21) provides a smoother trend-following signal. Crossovers and divergences between these EMAs can indicate potential buy or sell opportunities. **Candle Color Detection:** The code also tracks the color of candlesticks, distinguishing between green (bullish) and red (bearish) candles. This information is used in conjunction with other indicators to identify specific trading conditions. **Additional Upper Bands:** The script introduces upper bands at various levels (-5, -10, -20, -25) to create zones for potential buy and sell signals. These bands are visually represented on the chart and can help traders gauge the strength of a trend. **Alert Conditions:** The code includes several alert conditions that trigger notifications when specific events occur, such as %R crossing certain levels, candle color changes within predefined upper bands, and EMA crossovers. **Background Highlighting:** The upper bands and the zero line are visually highlighted with different colors, making it easier for traders to identify critical price levels. This code is valuable for traders seeking a versatile technical strategy that combines multiple indicators to improve trading decisions. By incorporating the Williams %R, EMAs, candlestick analysis, and upper bands, it offers a holistic approach to technical analysis. Traders can customize the parameters to align with their trading preferences and risk tolerance. The use of alerts ensures that traders are promptly notified of potential trade setups, allowing for timely execution and risk management. Overall, this code serves as a valuable tool for traders looking to make more informed decisions in the dynamic world of financial markets.
Pine Script™ indicator
by KingForexBob
Dynamic GANN Square Of 9 BandsDynamic GANN Square Of 9 Bands Created on 3 Sept 2023 Adjust Increment Value: Customize increment to match symbol and price characteristics for accuracy. Green Line: 200 EMA. Identifies trend direction; moves with the prevailing trend. Red Lines: Mark prominent reversal levels closer to the red range; ideal for mean reversion strategies. Crossing red levels may indicate trend continuation to the next red level. Grey Lines: Show immediate target reversal levels; watch for potential reversals. Key Features: Levels are different from Standard Deviation Lines. Levels remain fixed and parallel, unaffected by volatility. Despite its dynamism, it can serve as a leading indicator, revealing potential trend changes. Primarily designed for trend-following strategies. Additional Tips: Use additional confirmations Manage predefined risk and quantity Additional Resources: GANN Square Of 9 Pivots:
Pine Script™ indicator
by Arun_K_Bhaskar
8
Trade Tool VDWMA + OI RSI BasedThis indicator works only for symbols where open interest data is available. The idea was to create a combination of Volume Delta, Open Interest, RSI, Moving Average and Support / Resistance as a unified tool. I created a Weighted Moving Average based on the Volume Delta (VDWMA). The idea behind this was to reflect the moving average on the difference between buy and sell volume. There are two VDWMA to determine a trend. Fast and Slow. The principle is the same as with conventional moving averages. For visualization, the candles are colored based on the following logic: up trend = Fast VDWMA is above the Slow VDWMA and the price is above the Fast VWDWMA. down Trend = Fast VDWMA is below the Slow VDWMA and the Short is below the Fast VDWMA Further, support and resistance zones were defined based on the close and high prices as well as close and low prices. A simple logic looks for divergences between RSI and price to generate first signals for possible price reversals. Another RSI was created based on the open interest. In combination with the conventional RSI, oversold and overbought zones were defined based on the following logic, which are marked by vertical zones on the chart. Oversold zone = RSI is below 30 and OI RSI is above 70 or below 30 and OI opening is not greater than OI closing price Overbought zone = RSI is above 70 and OI RSI is above 70 or below 30 and OI opening is not smaller than OI closing price Based on this, buy and sell signals were defined. First, the support or resistance zone must remain the same for two candles, which signals that the zone has not been breached. In addition, a divergence must occur in the RSI and the price must bounce. newsell = resistance == resistance and high >= resistance and close < resistance and bearishDiv newbull = support == support and low <= support and close > support and bullishDiv The OI signaling was deliberately not included as well as the trend function. The tool should be suitable for scalping as well as for swinging. Thus, depending on the tradestyle itself to decide which points you want to trade. Have fun with it
Pine Script™ indicator
by Demech
2
Bitcoin Market Cap wave model weeklyThis Bitcoin Market Cap wave model indicator is rooted in the foundation of my previously developed tool, the : Bitcoin wave model To derive the Total Market Cap from the Bitcoin wave price model, I employed a straightforward estimation for the Total Market Supply (TMS). This estimation relies on the formula: TMS <= (1 - 2^(-h)) for any h.This equation holds true for any value of h, which will be elaborated upon shortly. It is important to note that this inequality becomes the equality at the dates of halvings, diverging only slightly during other periods. Bitcoin wave model is based on the logarithmic regression model and the sinusoidal waves, induced by the halving events. This chart presents the outcome of an in-depth analysis of the complete set of Bitcoin price data available from October 2009 to August 2023. The central concept is that the logarithm of the Bitcoin price closely adheres to the logarithmic regression model. If we plot the logarithm of the price against the logarithm of time, it forms a nearly straight line. The parameters of this model are provided in the script as follows: log(BTCUSD) = 1.48 + 5.44log(h). The secondary concept involves employing the inherent time unit of Bitcoin instead of days: 'h' denotes a slightly adjusted time measurement intrinsic to the Bitcoin blockchain. It can be approximated as (days since the genesis block) * 0.0007. Precisely, 'h' is defined as follows: h = 0 at the genesis block, h = 1 at the first halving block, and so forth. In general, h = block height / 210,000. Adjustments are made to account for variations in block creation time. The third concept revolves around investigating halving waves triggered by supply shock events resulting from the halvings. These halvings occur at regular intervals in Bitcoin's native time 'h'. All halvings transpire when 'h' is an integer. These events induce waves with intervals denoted as h = 1. Consequently, we can model these waves using a sin(2pih - a) function. The parameter determining the time shift is assessed as 'a = 0.4', aligning with earlier expectations for halving events and their subsequent outcomes. The fourth concept introduces the notion that the waves gradually diminish in amplitude over the progression of "time h," diminishing at a rate of 0.7^h. Lastly, we can create bands around the modeled sinusoidal waves. The upper band is derived by multiplying the sine wave by a factor of 3.1*(1-0.16)^h, while the lower band is obtained by dividing the sine wave by the same factor, 3.1*(1-0.16)^h. The current bandwidth is 2.5x. That means that the upper band is 2.5 times the lower band. These bands are forming an exceptionally narrow predictive channel for Bitcoin. Consequently, a highly accurate estimation of the peak of the next cycle can be derived. The prediction indicates that the zenith past the fourth halving, expected around the summer of 2025, could result in Total Bitcoin Market Cap ranging between 4B and 5B USD. The projections to the future works well only for weekly timeframe. Enjoy the mathematical insights!
Pine Script™ indicator
by leoum
1
Bitcoin wave modelBitcoin wave model is based on the logarithmic regression model and the sinusoidal waves, induced by the halving events. This chart presents the outcome of an in-depth analysis of the complete set of Bitcoin price data available from October 2009 to August 2023. The central concept is that the logarithm of the Bitcoin price closely adheres to the logarithmic regression model. If we plot the logarithm of the price against the logarithm of time, it forms a nearly straight line. The parameters of this model are provided in the script as follows: log (BTCUSD) = 1.48 + 5.44log(h). The secondary concept involves employing the inherent time unit of Bitcoin instead of days: 'h' denotes a slightly adjusted time measurement intrinsic to the Bitcoin blockchain. It can be approximated as (days since the genesis block) * 0.0007. Precisely, 'h' is defined as follows: h = 0 at the genesis block, h = 1 at the first halving block, and so forth. In general, h = block height / 210,000. Adjustments are made to account for variations in block creation time. The third concept revolves around investigating halving waves triggered by supply shock events resulting from the halvings. These halvings occur at regular intervals in Bitcoin's native time 'h'. All halvings transpire when 'h' is an integer. These events induce waves with intervals denoted as h = 1. Consequently, we can model these waves using a sin(2pih - a) function. The parameter determining the time shift is assessed as 'a = 0.4', aligning with earlier expectations for halving events and their subsequent outcomes. The fourth concept introduces the notion that the waves gradually diminish in amplitude over the progression of "time h," diminishing at a rate of 0.7^h. Lastly, we can create bands around the modeled sinusoidal waves. The upper band is derived by multiplying the sine wave by a factor of 3.1*(1-0.16)^h, while the lower band is obtained by dividing the sine wave by the same factor, 3.1*(1-0.16)^h. The current bandwidth is 2.5x. That means that the upper band is 2.5 times the lower band. These bands are forming an exceptionally narrow predictive channel for Bitcoin. Consequently, a highly accurate estimation of the peak of the next cycle can be derived. The prediction indicates that the zenith past the fourth halving, expected around the summer of 2025, could result in prices ranging between 200,000 and 240,000 USD. Enjoy the mathematical insights!
Pine Script™ indicator
by leoum
9
ATR Adaptive RSI OscillatorThe " ATR Adaptive RSI Oscillator " is a versatile technical analysis tool designed to help traders make informed decisions in dynamic market conditions. It combines the Relative Strength Index (RSI) with the Average True Range (ATR) to provide adaptive and responsive insights into price trends. Key Features : Adaptive RSI Periods : The indicator introduces the concept of adaptive RSI periods based on the ATR (Average True Range) of the market. When enabled, it dynamically adjusts the RSI calculation period, offering longer periods during high volatility and shorter periods during low volatility. This adaptability enhances the accuracy of RSI signals across varying market conditions. Volume-Based Smoothing : The indicator includes a smoothing feature that computes a time-decayed weighted moving average of RSI values over the last two bars, using volume-based weights. This approach offers a time-sensitive smoothing effect, reducing noise for a clearer view of trend strength compared to the standard RSI. Divergence Detection : Traders can enable divergence detection to identify potential reversal points in the market. The indicator highlights regular bullish and bearish divergences, providing valuable insights into market sentiment shifts. Customizable Parameters : Traders have the flexibility to customize various parameters, including RSI length, adaptive mode, ATR length, and divergence settings, to tailor the indicator to their trading strategy. Overbought and Oversold Levels : The indicator includes overbought (OB) and oversold (OS) boundary lines that can be adjusted to suit individual preferences. These levels help traders identify potential reversal zones. The "ATR Adaptive RSI Oscillator" is a powerful tool for traders seeking to adapt their trading strategies to changing market dynamics. Whether you're a trend follower or a contrarian trader, this indicator provides valuable insights to support your decision-making process.
Pine Script™ indicator
by tkarolak
10
[sphx] FWMAI've developed a cool indicator. The indicator calculates a Fibonacci-weighted moving average (FWMA) based on a specific length. What sets it apart is that it assists me in identifying potential trend reversals. When the indicator's color changes - from red to light red or from green to light green - it's an indication that the trend might be shifting. What makes the indicator even more interesting: While I'm keeping an eye on these color changes, I'm also observing the price behavior. I check whether the price is in a consolidation phase during the color transition. This not only helps me detect potential trend changes but also to see whether the market is in a phase of price consolidation. The combination of this information aids me in making well-informed trading decisions. I find the indicator so useful that I've decided to make it available to the community. You can use the code and adapt it to your own trading strategies. I hope it's as helpful to you as it has been to me. Wishing all of you successful trades and the best outcomes! Let's understand the market together and trade successfully.
Pine Script™ indicator
by zamansiz74
6
Pro RSI CalculatorThe "Pro RSI Calculator" indicator is the latest addition to a series of custom trading tools that includes the "Pro Supertrend Calculator" and the "Pro Momentum Calculator." Building upon this series, the "Pro RSI Calculator" is designed to provide traders with further insights into market trends by leveraging the Relative Strength Index (RSI) indicator. Its primary objective remains consistent: to analyze historical price data and make informed predictions about future price movements, with a specific focus on identifying potential bullish (green) or bearish (red) candlestick patterns. 1. RSI Calculation: The indicator begins by computing the RSI, a widely used momentum oscillator. It calculates two crucial RSI parameters: RSI Length: This parameter determines the lookback period for RSI calculations. RSI Upper and Lower Bands: These thresholds define overbought and oversold conditions, typically set at 70 and 30, respectively. 2. RSI Bands Visualization: The RSI values obtained from the calculation are skillfully plotted on the price chart, appearing as two distinct lines: Red Line: Represents the RSI when indicating a bearish trend, anticipating potential price declines. Teal Line: Represents the RSI in bullish market conditions, signaling the possibility of price increases. 3. Consecutive Candlestick Analysis: The indicator's core functionality revolves around tracking consecutive candlestick patterns based on their relationship with the RSI lines. To be included in the analysis, a candlestick must consistently close either above (green candles) or below (red candles) the RSI lines for multiple consecutive periods. 4. Labeling and Enumeration: To communicate the count of consecutive candles displaying consistent trend behavior, the indicator meticulously assigns labels to the price chart. Label positioning varies depending on the trend's direction, appearing either below (for bullish patterns) or above (for bearish patterns) the candlesticks. The color scheme aligns with the candle colors: green labels for bullish candles and red labels for bearish ones. 5. Tabular Data Presentation: The indicator enhances its graphical analysis with a customizable table that prominently displays comprehensive statistical insights. Key data points in the table include: - Consecutive Candles: The count of consecutive candles displaying consistent trend characteristics. - Candles Above Upper RSI: The number of candles closing above the upper RSI threshold during the consecutive period. - Candles Below Lower RSI: The number of candles closing below the lower RSI threshold during the consecutive period. - Upcoming Green Candle: An estimated probability of the next candlestick being bullish, derived from historical data. - Upcoming Red Candle: An estimated probability of the next candlestick being bearish, also based on historical data. 6. Custom Configuration: To cater to various trading strategies and preferences, the indicator offers extensive customization options. Traders can fine-tune parameters like RSI length, upper, and lower bands, label and table placement, and table size to align with their unique trading approaches.
Pine Script™ indicator
by Julien_Eche
AI Channels (Clustering) [LuxAlgo]The AI Channels indicator is constructed based on rolling K-means clustering, a common machine learning method used for clustering analysis. These channels allow users to determine the direction of the underlying trends in the price. We also included an option to display the indicator as a trailing stop from within the settings. 🔶 USAGE Each channel extremity allows users to determine the current trend direction. Price breaking over the upper extremity suggesting an uptrend, and price breaking below the lower extremity suggesting a downtrend. Using a higher Window Size value will return longer-term indications. The "Clusters" setting allows users to control how easy it is for the price to break an extremity, with higher values returning extremities further away from the price. The "Denoise Channels" is enabled by default and allows to see less noisy extremities that are more coherent with the detected trend. Users who wish to have more focus on a detected trend can display the indicator as a trailing stop. 🔹 Centroid Dispersion Areas Each extremity is made of one area. The width of each area indicates how spread values within a cluster are around their centroids. A wider area would suggest that prices within a cluster are more spread out around their centroid, as such one could say that it is indicative of the volatility of a cluster. Wider areas around a specific extremity can indicate a larger and more spread-out amount of prices within the associated cluster. In practice price entering an area has a higher chance to break an associated extremity. 🔶 DETAILS The indicator performs K-means clustering over the most recent Window Size prices, finding a number of user-specified clusters. See here to find more information on cluster detection. The channel extremities are returned as the centroid of the lowest, average, and highest price clusters. K-means clustering can be computationally expensive and as such we allow users to determine the maximum number of iterations used to find the centroids as well as the number of most historical bars to perform the indicator calculation. Do note that increasing the calculation window of the indicator as well as the number of clusters will return slower results. 🔶 SETTINGS Window Size: Amount of most recent prices to use for the calculation of the indicator. Clusters": Amount of clusters detected for the calculation of the indicator. Denoise Channels: When enabled, return less noisy channels extremities, disabling this setting will return the exact centroids at each time but will produce less regular extremities. As Trailing Stop: Display the indicator as a trailing stop. 🔹 Optimization This group of settings affects the runtime performance of the script. Maximum Iteration Steps: Maximum number of iterations allowed for finding centroids. Excessively low values can return a better script load time but poor clustering. Historical Bars Calculation: Calculation window of the script (in bars).
Pine Script™ indicator
by LuxAlgo
11
Bollinger Bands Heatmap (BBH)The Bollinger Bands Heatmap (BBH) Indicator provides a unique visualization of Bollinger Bands by displaying the full distribution of prices as a heatmap overlaying your price chart. Unlike traditional Bollinger Bands, which plot the mean and standard deviation as lines, BBH illustrates the entire statistical distribution of prices based on a normal distribution model. This heatmap indicator offers traders a visually appealing way to understand the probabilities associated with different price levels. The lower the weight of a certain level, the more transparent it appears on the heatmap, making it easier to identify key areas of interest at a glance. Key Features Dynamic Heatmap: Changes in real-time as new price data comes in. Fully Customizable: Adjust the scale, offset, alpha, and other parameters to suit your trading style. Visually Engaging: Uses gradients of colors to distinguish between high and low probabilities. Settings Scale Tooltip: Scale the size of the heatmap. Purpose: The 'Scale' setting allows you to adjust the dimensions of each heatmap box. A higher value will result in larger boxes and a more generalized view, while a lower value will make the boxes smaller, offering a more detailed look at price distributions. Values: You can set this from a minimum of 0.125, stepping up by increments of 0.125. Scale ATR Length Tooltip: The ATR used to scale the heatmap boxes. Purpose: This setting is designed to adapt the heatmap to the instrument's volatility. It determines the length of the Average True Range (ATR) used to size the heatmap boxes. Values: Minimum allowable value is 5. You can increase this to capture more bars in the ATR calculation for greater smoothing. Offset Tooltip: Offset mean by ATR. Purpose: The 'Offset' setting allows you to shift the mean value by a specified ATR. This could be useful for strategies that aim to capitalize on extreme price movements. Values: The value can be any floating-point number. Positive values shift the mean upward, while negative values shift it downward. Multiplier Tooltip: Bollinger Bands Multiplier. Purpose: The 'Multiplier' setting determines how wide the Bollinger Bands are around the mean. A higher value will result in a wider heatmap, capturing more extreme price movements. A lower value will tighten the heatmap around the mean price. Values: The minimum is 0, and you can increase this in steps of 0.2. Length Tooltip: Length of Simple Moving Average (SMA). Purpose: This setting specifies the period for the Simple Moving Average that serves as the basis for the Bollinger Bands. A higher value will produce a smoother average, while a lower value will make it more responsive to price changes. Values: Can be set to any integer value. Heat Map Alpha Tooltip: Opacity level of the heatmap. Purpose: This controls the transparency of the heatmap. A lower value will make the heatmap more transparent, allowing you to see the price action more clearly. A higher value will make the heatmap more opaque, emphasizing the bands. Values: Ranges from 0 (completely transparent) to 100 (completely opaque). Color Settings High Color & Low Color: These settings allow you to customize the gradient colors of the heatmap. Purpose: Use contrasting colors for better visibility or colors that you prefer. The 'High Color' is used for areas with high density (high probability), while the 'Low Color' is for low-density areas (low probability). Usage Scenarios for Settings For Volatile Markets: Increase 'Scale ATR Length' for better smoothing and set a higher 'Multiplier' to capture wider price movements. For Trend Following: You might want to set a larger 'Length' for the SMA and adjust 'Scale' and 'Offset' to focus on more probable price zones. These are just recommendations; feel free to experiment with these settings to suit your specific trading requirements. How To Interpret The heatmap gives a visual representation of the range within which prices are likely to move. Areas with high density (brighter color) indicate a higher probability of the price being in that range, whereas areas with low density (more transparent) indicate a lower probability. Bright Areas: Considered high-probability zones where the price is more likely to be. Transparent Areas: Considered low-probability zones where the price is less likely to be. Tips For Use Trend Confirmation: Use the heatmap along with other trend indicators to confirm the strength and direction of a trend. Volatility: Use the density and spread of the heatmap as an indication of market volatility. Entry and Exit: High-density areas could be potential support and resistance levels, aiding in entry and exit decisions. Caution The Bollinger Bands Heatmap assumes a normal distribution of prices. While this is a standard assumption in statistics, it is crucial to understand that real-world price movements may not always adhere to a normal distribution. Conclusion The Bollinger Bands Heatmap Indicator offers traders a fresh perspective on Bollinger Bands by transforming them into a visual, real-time heatmap. With its customizable settings and visually engaging display, BBH can be a useful tool for traders looking to understand price probabilities in a dynamic way. Feel free to explore its features and adjust the settings to suit your trading strategy. Happy trading!
Pine Script™ indicator
by The_Peaceful_Lizard
3