Get started

Buy

sohail Anjum EMA buy sellBased on Sohail anjum Ema crossing teaching Crossover alerts, only in trend 200 Ema (yellow line) make sure If the price is above the 200 EMA, you can prefer a long position and ignore short positions. If the price is below the 200 EMA, you are allowed to open only short positions and avoid long positions. Do not use this indicator alone, Use other recommended indicators by ShohailAnjum Rsi, Macd , chart pattren, etc This indicator good win rate in 15m TF recommended 1H, 4H
Pine Script™ indicator
by specialabbasi
BBSS - Bollinger Bands Scalping SignalsModified Bollinger Bands Indicator Added: - color change divergence (green) and narrowing (red) of the upper and lower bands - color change of the moving average - upward trend (green) and downward trend (red) - the appearance of a potential signal for long and short positions when the candle closes behind the upper or lower bands. How to use the indicator: Long conditions: - the price breaks through the upper band - Bollinger bands are expanding and should be green - the mid-line is green - the trigger candle should be green Short conditions: - the price breaks through the lower band - Bollinger bands are expanding and should be red - the mid-line is red - the trigger candle should be red
Pine Script™ indicator
by berezitskysl
1
Simple Buy and Sell SignalsThis is a Simple Indicator which shows buy and sell signals based on MACD and SSL channel. It is not a Holy Grail Indicator. It shows a lot of false signals when the market is Consolidation Zone. So don't use this indicator to place trades based on signals given by the indicator. Use this as a confluence along with your technical analysis On lower timeframes there are a lot of signals so to eliminate false signals , get a signal on higher timeframe and place a trade in the direction of the trend on lower timeframe. Hope you'll find this helpful. Enjoy👍.
Pine Script™ indicator
by a_guy_from_wall_street
3
Intraday Buy/Sell using Gann Angles - RiTzIntraday Buy/Sell Levels using Gann Angles based on Todays Open/previous Day High/Low/Close prices How to use this : The Buy/Sell levels will be calculated on 1 of 4 things (you can choose any one which you prefer) 1. Todays Open price 2. Previous Day High 3. Previous Day Low 4. Previous Day Close The Buy/Sell levels will be displayed in these ways 1. In a Table 2. on the Chart You can turn them on/off according to your preference! I can't seem to find the original documentation or a link to it. i have it's excel file, in which we have to enter following data : 1. Todays Open price 2. Previous Day High 3. Previous Day Low 4. Previous Day Close and the buy/sell levels are calculated by using the above data in following manner : Based On Today's Opening Price (lets call it TDO) Degree's````````````````` Degree Factor```````````````````````` Buy````````````````````````` Sell 11.25```````````````````` =degree/180=11.25/180=0.0625````````` =(sqrt(TDO)-0.0625)^2``````` =(sqrt(TDO)+0.0625)^2````` SL 22.5````````````````````` =degree/180=22.5/180=0.125``````````` =(sqrt(TDO)+0.125)^2```````` =(sqrt(TDO)-0.125)^2`````` Buy/Sell At 45``````````````````````` =degree/180=45/180=0.25`````````````` =(sqrt(TDO)+0.25)^2````````` =(sqrt(TDO)-0.25)^2``````` Target-1 90``````````````````````` =degree/180=90/180=0.5``````````````` =(sqrt(TDO)+0.5)^2`````````` =(sqrt(TDO)-0.5)^2```````` Target-2 135`````````````````````` =degree/180=135/180=0.75````````````` =(sqrt(TDO)+0.75)^2````````` =(sqrt(TDO)-0.75)^2``````` Target-3 180`````````````````````` =degree/180=180/180=1```````````````` =(sqrt(TDO)+1)^2```````````` =(sqrt(TDO)-1)^2`````````` Target-4 225`````````````````````` =degree/180=225/180=1.25````````````` =(sqrt(TDO)+1.25)^2````````` =(sqrt(TDO)-1.25)^2``````` Target-5 270`````````````````````` =degree/180=270/180=1.5`````````````` =(sqrt(TDO)+1.5)^2`````````` =(sqrt(TDO)-1.5)^2```````` Target-6 315`````````````````````` =degree/180=315/180=1.75````````````` =(sqrt(TDO)+1.75)^2````````` =(sqrt(TDO)-1.75)^2``````` Target-7 360`````````````````````` =degree/180=360/180=2```````````````` =(sqrt(TDO)+2)^2```````````` =(sqrt(TDO)-2)^2`````````` Target-8 sqrt = square root TDO = Today's Opening Price PDH = Previous Days High PDL = Previous Days Low PDC = Previous Days Close Based On Previous Days High Price (lets call it PDH) Degree's````````````````` Degree Factor```````````````````````` Buy````````````````````````` Sell 11.25```````````````````` =degree/180=11.25/180=0.0625````````` =(sqrt(PDH)-0.0625)^2``````` =(sqrt(PDH)+0.0625)^2````` SL 22.5````````````````````` =degree/180=22.5/180=0.125``````````` =(sqrt(PDH)+0.125)^2```````` =(sqrt(PDH)-0.125)^2`````` Buy/Sell At 45``````````````````````` =degree/180=45/180=0.25`````````````` =(sqrt(PDH)+0.25)^2````````` =(sqrt(PDH)-0.25)^2``````` Target-1 90``````````````````````` =degree/180=90/180=0.5``````````````` =(sqrt(PDH)+0.5)^2`````````` =(sqrt(PDH)-0.5)^2```````` Target-2 135`````````````````````` =degree/180=135/180=0.75````````````` =(sqrt(PDH)+0.75)^2````````` =(sqrt(PDH)-0.75)^2``````` Target-3 180`````````````````````` =degree/180=180/180=1```````````````` =(sqrt(PDH)+1)^2```````````` =(sqrt(PDH)-1)^2`````````` Target-4 225`````````````````````` =degree/180=225/180=1.25````````````` =(sqrt(PDH)+1.25)^2````````` =(sqrt(PDH)-1.25)^2``````` Target-5 270`````````````````````` =degree/180=270/180=1.5`````````````` =(sqrt(PDH)+1.5)^2`````````` =(sqrt(PDH)-1.5)^2```````` Target-6 315`````````````````````` =degree/180=315/180=1.75````````````` =(sqrt(PDH)+1.75)^2````````` =(sqrt(PDH)-1.75)^2``````` Target-7 360`````````````````````` =degree/180=360/180=2```````````````` =(sqrt(PDH)+2)^2```````````` =(sqrt(PDH)-2)^2`````````` Target-8 Based On Previous Days Low Price (lets call it PDL) Degree's````````````````` Degree Factor```````````````````````` Buy````````````````````````` Sell 11.25```````````````````` =degree/180=11.25/180=0.0625````````` =(sqrt(PDL)-0.0625)^2``````` =(sqrt(PDL)+0.0625)^2````` SL 22.5````````````````````` =degree/180=22.5/180=0.125``````````` =(sqrt(PDL)+0.125)^2```````` =(sqrt(PDL)-0.125)^2`````` Buy/Sell At 45``````````````````````` =degree/180=45/180=0.25`````````````` =(sqrt(PDL)+0.25)^2````````` =(sqrt(PDL)-0.25)^2``````` Target-1 90``````````````````````` =degree/180=90/180=0.5``````````````` =(sqrt(PDL)+0.5)^2`````````` =(sqrt(PDL)-0.5)^2```````` Target-2 135`````````````````````` =degree/180=135/180=0.75````````````` =(sqrt(PDL)+0.75)^2````````` =(sqrt(PDL)-0.75)^2``````` Target-3 180`````````````````````` =degree/180=180/180=1```````````````` =(sqrt(PDL)+1)^2```````````` =(sqrt(PDL)-1)^2`````````` Target-4 225`````````````````````` =degree/180=225/180=1.25````````````` =(sqrt(PDL)+1.25)^2````````` =(sqrt(PDL)-1.25)^2``````` Target-5 270`````````````````````` =degree/180=270/180=1.5`````````````` =(sqrt(PDL)+1.5)^2`````````` =(sqrt(PDL)-1.5)^2```````` Target-6 315`````````````````````` =degree/180=315/180=1.75````````````` =(sqrt(PDL)+1.75)^2````````` =(sqrt(PDL)-1.75)^2``````` Target-7 360`````````````````````` =degree/180=360/180=2```````````````` =(sqrt(PDL)+2)^2```````````` =(sqrt(PDL)-2)^2`````````` Target-8 Based On Previous Days Close Price (lets call it PDC) Degree's````````````````` Degree Factor```````````````````````` Buy````````````````````````` Sell 11.25```````````````````` =degree/180=11.25/180=0.0625````````` =(sqrt(PDC)-0.0625)^2``````` =(sqrt(PDC)+0.0625)^2````` SL 22.5````````````````````` =degree/180=22.5/180=0.125``````````` =(sqrt(PDC)+0.125)^2```````` =(sqrt(PDC)-0.125)^2`````` Buy/Sell At 45``````````````````````` =degree/180=45/180=0.25`````````````` =(sqrt(PDC)+0.25)^2````````` =(sqrt(PDC)-0.25)^2``````` Target-1 90``````````````````````` =degree/180=90/180=0.5``````````````` =(sqrt(PDC)+0.5)^2`````````` =(sqrt(PDC)-0.5)^2```````` Target-2 135`````````````````````` =degree/180=135/180=0.75````````````` =(sqrt(PDC)+0.75)^2````````` =(sqrt(PDC)-0.75)^2``````` Target-3 180`````````````````````` =degree/180=180/180=1```````````````` =(sqrt(PDC)+1)^2```````````` =(sqrt(PDC)-1)^2`````````` Target-4 225`````````````````````` =degree/180=225/180=1.25````````````` =(sqrt(PDC)+1.25)^2````````` =(sqrt(PDC)-1.25)^2``````` Target-5 270`````````````````````` =degree/180=270/180=1.5`````````````` =(sqrt(PDC)+1.5)^2`````````` =(sqrt(PDC)-1.5)^2```````` Target-6 315`````````````````````` =degree/180=315/180=1.75````````````` =(sqrt(PDC)+1.75)^2````````` =(sqrt(PDC)-1.75)^2``````` Target-7 360`````````````````````` =degree/180=360/180=2```````````````` =(sqrt(PDC)+2)^2```````````` =(sqrt(PDC)-2)^2`````````` Target-8 example based On Today's Opening Price = 4339 Degree's```````` Degree Factor```````` Buy`````````` Sell 11.25``````````` 0.0625``````````````` 4330.77`````` 4347.24```````` SL 22.5```````````` 0.125```````````````` 4355.48`````` 4322.55```````` Buy/Sell At 45`````````````` 0.25````````````````` 4372.00`````` 4306.13```````` Target-1 90`````````````` 0.5`````````````````` 4405.12`````` 4273.38```````` Target-2 135````````````` 0.75````````````````` 4438.37`````` 4240.76```````` Target-3 180````````````` 1```````````````````` 4471.74`````` 4208.26```````` Target-4 225````````````` 1.25````````````````` 4505.24`````` 4175.88```````` Target-5 270````````````` 1.5`````````````````` 4538.86`````` 4143.64```````` Target-6 315````````````` 1.75````````````````` 4572.61`````` 4111.51```````` Target-7 360````````````` 2```````````````````` 4606.48`````` 4079.52```````` Target-8 Note : ignore the '`' , inserted them to fill up the spaces , it was looking very weird!, tried to fix it as much as I can. Note :- Please correct me if I'm wrong , as I've already mentioned I don't have it's original documentation. if anyone can find it or already has it then please feel free to share it.
Pine Script™ indicator
by Keanu_ritz
58
MACD + RSI with Trade SignalsThis indicator by default comes with the MACD shown but can be switched to show the RSI instead. Settings for each indicator can also be customized as well as Buy/Sell signals given based on pull back crossovers that follow the 200 EMA of the price Chart. There's an above/below middle fill option you can use but I tend not to but I know some traders like to see when an oscillator is above/below the middle and use it as a trend diretion. By the way, the fourth setting for the MACD (which is 2 by default) is the size of the histogram. Buy Signal = Price is above the 200 EMA. Current or previous MACD or RSI line is/was below middle line and now crossed above the signal line. Sell Signal = Price is below the 200 EMA. Current or previous MACD or RSI line is/was above middle line and now crossed below the signal line. There are alerts for each signal as well (MACD and RSI, both buy and sell). Feel free to leave a comment regarding issues or suggestions for this indicator or ideas for the next one I should do :)
Pine Script™ indicator
by theehoganator
6
MPF EMA Cross Strategy (8~13~21) by Market Pip FactoryThis script is for a complete strategy to win maximum profit on trades whilst keeping losses at a minimum, using sound risk management at no greater than 1.5% The 3x EMA Strategy uses the following parameters for trade activation and closure. 1/ Daily Time Frame for trend confirmation 2/ 4 Hourly Time Frame for trend confirmation 3/ 1 Hourly Time Frame for trend confirmation AND trade execution 4/ 3x EMAs (Exponential Moving Averages) * EMA#1 = 8 EMA (Red Color) * EMA#2 = 13 EMA (Blue Color) * EMA#3 = 21 EMA (Orange Color) 5/ Fanning of all 3x EMAs and CrossOver/CrossUnder for Trend Confirmation 6/ Price Action touching an 8 EMA for trade activation 7/ Price Action touching a 21 EMA for trade cancellation BEFORE activation * For LONG trades: 8 EMA would be ABOVE 21 EMA * For SHORT trades: 8 EMA would be BELOW 21 EMA * For trade Cancellation, price action would touch the 21 EMA before trade is activated * For trade Entry, price action would touch 8 EMA Once trigger parameter is identified, entry is found by: a) Price action touches 8 EMA (Candle must Close for confirmed Trade preparation) b) Trade preparation can be cancelled before trade is activated if price action touches 21 EMA c) Trailing Stop Loss can be used (optional) by counting back 5 candles from current candle CLOSURE of a Trade is identified by: e) 8 EMA crossing the 21 EMA, then close trade, no matter LONG or SHORT f) Trail Stop Loss IMPORTANT: g) No more than ONE activated trade per EMA crossover h) No more than ONE active trade per pair NOTE: This strategy is to be used in conjunction with Cipher Twister (my other indicator) to reduce trades on sideways price action and market trends for super high win ratio. NOTE: Enabling of LONGs and SHORTs Via Cipher Twister is done by using the previous green or red dot made. Additionally, when the trend changes, so do the dot's validity based on being above or below the 0 centerline. ---------------------------- Strategy and Bot Logic ---------------------------- .....::: FOR SHORT TRADES ONLY :::..... The Robot must use the following logic to enable and activate the SHORT trades: Parameters: $(crossunder)=8EMA,21EMA=Bearish $(crossover)=8EMA,21EMA=Bullish $entry=SELL STOP ORDER (Short) $EMA#1 = 8 EMA (Red Color) $EMA#2 = 13 EMA (Blue Color) $EMA#3 = 21 EMA (Orange Color) Strategy Logic: 1/ Check Daily Time Frame for trend confirmation if: (look back up to 50 candles - find last cross of EMAs) $(chart)=daily and trend=$(crossunder) then goto 2/ *Means: crossunder = ema21 > ema8 $(chart)=daily and trend=$(crossover) then stop (No trades) *Means: crossover = ema8 > ema21 NOTE: This function is switchable. 0=off and 1=on(active). Default = 1 (on) 2/ Check 4 Hourly Time Frame for trend confirmation if: (look back up to 50 candles - find last cross of EMAs) $(chart)=4H and trend=$(crossunder) then goto 3/ *Means: crossunder = ema21 > ema8 $(chart)=4H and trend=$(crossover) then stop (No trades) *Means: crossover = ema8 > ema21 NOTE: This function is switchable. 0=off and 1=on(active). Default = 1 (on) 3/ 1 Hourly Time Frame for trend confirmation AND trade execution if: (look back up to 50 candles - find last cross of EMAs) $(chart)=1H and trend=$(crossunder) then goto 4/ *Means: crossunder = ema21 > ema8 $(chart)=1H and trend=$(crossover) then stop (No trades) *Means: crossover = ema8 > ema21 4/ Trade preparation: * if Next (subsequent) candle touches 8EMA, then set STOP LOSS and ENTRY * $stoploss=3 pips ABOVE current candle HIGH * $entry=3 pips BELOW current candle LOW 5/ Trade waiting (ONLY BEFORE entry is hit and trade activated): * if price action touches 21 EMA then cancel trade and goto 1/ Note: Once trade is active this function does not apply ! 6/ Trade Activation: * if price activates/hits ENTRY price, then bot activates trade SHORTs market 7/ Optional Trailing stop: * if active, then trailing stop 3 pips ABOVE previous HIGH of previous 5th candle or * Move Stop Loss to Break Even after $X number of pips NOTE: This means count back and apply accordingly to the 5th previous candle from current candle. NOTE: This function is switchable. 0=off and 1=on(active). Default = 0 (off) 8/ Trade Close ~ Take Profit: * Only TP when $(chart)=1H and trend=$(crossover) then close trade ~ Or obviously if Stop Loss is hit if 7/ is activated. ----------END FOR SHORT TRADES LOGIC---------- .....::: FOR LONG TRADES ONLY :::..... The Robot must use the following logic to enable and activate the LONG trades: Parameters: $(crossunder)=8EMA,21EMA=Bearish $(crossover)=8EMA,21EMA=Bullish $entry=BUY STOP ORDER (Long) $EMA#1 = 8 EMA (Red Color) $EMA#2 = 13 EMA (Blue Color) $EMA#3 = 21 EMA (Orange Color) Strategy Logic: 1/ Check Daily Time Frame for trend confirmation if: (look back up to 50 candles - find last cross of EMAs) $(chart)=daily and trend=$(crossover) then goto 2/ *Means: crossover = ema8 > ema21 $(chart)=daily and trend=$(crossunder) then stop (No trades) *Means: crossunder = ema21 > ema8 NOTE: This function is switchable. 0=off and 1=on(active). Default = 1 (on) 2/ Check 4 Hourly Time Frame for trend confirmation if: (look back up to 50 candles - find last cross of EMAs) $(chart)=4H and trend=$(crossover) then goto 3/ *Means: crossover = ema8 > ema21 $(chart)=4H and trend=$(crossunder) then stop (No trades) *Means: crossunder = ema21 > ema8 NOTE: This function is switchable. 0=off and 1=on(active). Default = 1 (on) 3/ 1 Hourly Time Frame for trend confirmation AND trade execution if: (look back up to 50 candles - find last cross of EMAs) $(chart)=1H and trend=$(crossover) then goto 4/ *Means: crossover = ema8 > ema21 $(chart)=1H and trend=$(crossunder) then stop (No trades) *Means: crossunder = ema21 > ema8 4/ Trade preparation: * if Next (subsequent) candle touches 8EMA, then set STOP LOSS and ENTRY * $stoploss=3 pips BELOW current candle LOW * $entry=3 pips ABOVE current candle HIGH 5/ Trade waiting (ONLY BEFORE entry is hit and trade activated): * if price action touches 21 EMA then cancel trade and goto 1/ Note: Once trade is active this function does not apply ! 6/ Trade Activation: * if price activates/hits ENTRY price, then bot activates trade LONGs market 7/ Optional Trailing stop: * if active, then trailing stop 3 pips BELOW previous LOW of previous 5th candle or * Move Stop Loss to Break Even after $X number of pips NOTE: This means count back and apply accordingly to the 5th previous candle from current candle. NOTE: This function is switchable. 0=off and 1=on(active). Default = 0 (off) 8/ Trade Close ~ Take Profit: * Only TP when $(chart)=1H and trend=$(crossunder) then close trade ~ Or obviously if Stop Loss is hit if 7/ is activated. ----------END FOR LONG TRADES LOGIC---------- IMPORTANT: * If an existing trade is already open for that same pair, & price action touches 8EMA, do NOT open a new trade.. * bot must continuously check if a trade is currently open on the pair that triggers * New trades are to be only opened if there is no active trade opened on current pair. * Only 1 trade per pair rule ! * 5 simultaneous open trades (not same pairs) default = 5 but value can be changed accordingly. * Maximum risk management must not exceed 1.5% on lot size *** Some features are not yet available autoated, they will be added in due course in subsequent version updates ***
Pine Script™ indicator
by Market-Pip-Factory
3
MM SIGMA STC+ADXThe Schaff Trend Cycle (STC) is a charting indicator that is commonly used to identify market trends and provide buy and sell signals to traders. Developed in 1999 by noted currency trader Doug Schaff, STC is a type of oscillator and is based on the assumption that, regardless of time frame, currency trends accelerate and decelerate in cyclical patterns.12 How STC Works Many traders are familiar with the moving average convergence/divergence (MACD) charting tool, which is an indicator that is used to forecast price action and is notorious for lagging due to its slow responsive signal line . By contrast, STC’s signal line enables it to detect trends sooner. In fact, it typically identifies up and downtrends long before MACD indicator. While STC is computed using the same exponential moving averages as MACD, it adds a novel cycle component to improve accuracy and reliability. While MACD is simply computed using a series of moving average, the cycle aspect of STC is based on time (e.g., number of days). It should also be noted that, although STC was developed primarily for fast currency markets, it may be effectively employed across all markets, just like MACD. It can be applied to intraday charts, such as five minutes or one-hour charts, as well as daily, weekly, or monthly time frames. Introduction to ADX ADX is used to quantify trend strength. ADX calculations are based on a moving average of price range expansion over a given period of time. The default setting is 14 bars, although other time periods can be used.1 ADX can be used on any trading vehicle such as stocks, mutual funds, exchange-traded funds and futures. ADX is plotted as a single line with values ranging from a low of zero to a high of 100. ADX is non-directional; it registers trend strength whether price is trending up or down.2 The indicator is usually plotted in the same window as the two directional movement indicator (DMI) lines, from which ADX is derived (shown below).Quantifying Trend Strength ADX values help traders identify the strongest and most profitable trends to trade. The values are also important for distinguishing between trending and non-trending conditions. Many traders will use ADX readings above 25 to suggest that the trend is strong enough for trend-trading strategies. Conversely, when ADX is below 25, many will avoid trend-trading strategies. ADX Value Trend Strength 0-25 Absent or Weak Trend 25-50 Strong Trend 50-75 Very Strong Trend 75-100 Extremely Strong Trend Low ADX is usually a sign of accumulation or distribution. When ADX is below 25 for more than 30 bars, price enters range conditions, and price patterns are often easier to identify. Price then moves up and down between resistance and support to find selling and buying interest, respectively. From low ADX conditions, price will eventually break out into a trend. Below, the price moves from a low ADX price channel to an uptrend with strong ADX. Added Buy/Sell alerts ADX filters based on the threshold you put in the settings. great for trend and trade confirmation
Pine Script™ indicator
by MoneyMovesInvestments
3
No-lose trading targets (Based on MFI) By Mustafa ÖZVERThis code shows expected reaction target prices after sudden moving based on MFI . Red area means the price is on overbought area, green area means the price is on oversold area. If you see red area under price, you can make short option to next to the horizontal beginning price of red area. If you see green area over price, you can make long option to next to the horizontal beginning price of green area. When this code works - The green area starts where mfi value is on oversold - The red area starts where mfi value is on overbought Of course, this code may be failed, do not forget the target may never come. But hopefully price will cross over the target. And you (as developers) can develop this code by using anything instead of mfi to get up-down target prices. But only this values can not guarantee good results for trading. BE CAREFUL
Pine Script™ indicator
by Mustafaozver
4
Cipher Twister - Long and ShortINTRO / NOTES: This script is based on Market Cipher B Oscillator by Falcon The difference in this script is that only the useful points are printed on the indicator, namely Long and Short Trade Execution signals to be used by a bot, namely the PT Bot. The script also differs from the original that it has been upgraded to Pinescript v4 This oscillator can be used with ALL time frames, but generally works the best on 15 minute and 1 hour charts on ANY market, no matter, stock, forex, crypto, spot, futures, derivatives, Nasdaq etc... DEFINITIONS: This oscillator forms the foundation of Buy and Exit of Long and Short Trades. There are 2 'Red' Lines at the top of the channel and 2 Green Lines at the bottom of the channel. These two channels are set at default to be +53 / -53 and +60 / -60 respectively. These two lines will serve as the threshold point if one is to make cautious trades only. There is a center line which divides the Oscillator into two parts. Above the center line, the market is in over bought territory and Below the center line is in over sold territory. 'Red' dots are drawn by the indicator to represent a potential Short (or a signal to exit from a Long position) 'Green' dots are drawn by the indicator to represent a potential Long (or a signal to exit from a Short position) The 'Red' and 'Green' dots are draw when a Cross between both wt1 & wt2 cross, thus providing a fantastic indication of potential trend reversal and entry/exit of a position. STRATEGY NOTES: The strategy to use this indicator with for realistic and proper results would be to use it with an automated Trading Bot such as Profit Trailer (PT-BOT) You could use this strategy manually, however it would mean you would need to sit in front of the screen all day and night long and activate the trades immediately after the 'red'/'green' dots are drawn. Usually this will result in non-optimal entries and exits as well as loss on various instances when a 'red' and 'green' dot are printed close together (which is usually when the market goes into correction/consolidation) and slow entries/exits will result in a loss rather than a small profit or exit at BE (Break Even) ACTUAL STRATEGY (For use with automated bot) To be used in conjunction with Heikin Ashi Candles for added cautionary measures For LONGs ONLY -------------------- 1/ When 'Green' dot is drawn, ACTIVATE Long Position (Use 1.5% Risk Management for each trade) (Use Lot size based on 1.5% risk management and xLeverage (if any)) 2/ Make sure bot Opens an SL (Stop Loss) value based on 1.5% Risk Management 3/ When 'Red' dot is drawn, CLOSE Long Position. *If you want to add extra caution to your trade, only activate the trade if the 'Green' dot is BELOW the 'Green' Markers *For added caution, use color coded Heikin Ashi candles to 'confirm' Activation and Closing of a trade in the bot configuration --------------------------------------------------------------------------------------------------- For SHORTs ONLY -------------------- 1/ When 'Red' dot is drawn, ACTIVATE Short Position (Use 1.5% Risk Management for each trade) (Use Lot size based on 1.5% risk management and xLeverage (if any)) 2/ Make sure bot Opens an SL (Stop Loss) value based on 1.5% Risk Management 3/ When 'Green' dot is drawn, CLOSE Short Position *If you want to add extra caution to your trade, only activate the trade if the 'Red' dot is Above the Red Markers *For added caution, use color coded Heikin Ashi candles to 'confirm' Activation and Closing of a trade in the bot configuration --------------------------------------------------------------------------------------------------- Supplementary Notes: Make sure that your bot configuration will only activate ONE TRADE when the 'Green'/'Red' dot appears. Occasionally during high volatility , 'red'/'green' dots will appear intermittently before remaining drawn, thus the oscillator 'redraws' the dots during market movement. There will be times where occasionally a 'green' dot or a 'red' dot will appear, the trade will be opened, but the trade will fail due to the market manipulation (algorithm/market maker bots/fake volume etc), to wipe out those trading on derivatives and futures markets using leverage. Do not worry about this, no bot can make 100% wins, no strategy will achieve 100% win ratio and one necessarily doesn't need a high win ratio when using strict money management practices with your trading for SL and lot size. If you use this method, you will see great results, but again I must stress, using this method with a fully automated bot is the only way to achieve proper results.
Pine Script™ indicator
by Market-Pip-Factory
10
Trend IdentifierTrend Identifier for 1D BTC.USD It smoothens a closely following moving average into a polynomial like plot. And assumes 4 stage cycles based on the first and second derivatives. Green: Bull / Exponential Rise Yellow: Distribution Red: Bear / Exponential Drop Blue: Accumulation Red --> Blue --> Green: indicates the start of a bull market Green --> Yellow --> Red: indicates the start of a bear market Green --> Yellow: Start of a distribution phase, take profits Red --> Blue: Start of a accumulation phase, DCA
Pine Script™ indicator
by spacekadet17
14
Swing Stock designed for Monthly/Yearly Trading This is a strategy tester designed around the most important data from FRED - Federal Reserve Economic Data As input data, we have: // Personal Consumption Expenditures // Real Retail and Food Services Sales // Leading Index for the United States // All Employees: Total Nonfarm Payrolls // Real Gross Domestic Product // Gross Domestic Product I adapted the long and short entry based on the GDP data, since they are most accurate in prediction compared to the rest. However, feel free to test with other as well if you want. For this test I compared previous GDP values, if they were higher than previous that represent a long signals, if they were smaller that represents a reversal=short signal. From the tests performed we can see that GDP is highly accurate and overall as long as there is patience, profits are going to be make, sometimes even beat the index itself. If you have any questions, let me know !
Pine Script™ strategy
by exlux
1
ENVELOPE RSI - Buy Sell SignalsThis indicator is mainly based on Overbought and Oversold . Indicator for short-term trading. This way you can get small but acceptable signals. The main basis of the indicator is as follows: To buy, the indicator is waiting for the instrument to be oversold from the RSI point of view. Then, if the chart crosses the bottom line of the Envelope indicator from the bottom to the top, a buy signal is issued. For sell, the indicator waits for the instrument to be overbought from the RSI perspective. Then, if the chart crosses the top line of the Envelope indicator from top to bottom, a sell signal is issued. The general basis is the consonance of the price and the RSI indicator . The best settings I came up with myself: Time frame: 15 minutes Overbought: 80 Oversell: 25 RSI Length: 8 It can be done on different instruments. But always set your profit and loss limits. (Profit to loss ratio in this indicator can be 1: 1.) Disclaimer : This information and trading indicators and tools provided neither is, nor should be construed, as an offer, or a solicitation of an offer, to buy or sell securities. You shall be fully responsible for any investment decision you make, and such decisions will be based solely on your evaluation of your financial circumstances, investment objectives, risk tolerance, and liquidity needs. I am not liable for any profit, financial improvement, losses or damages, monetary or other that may result from the application of information contained within this indicator. Individual traders must use their own due diligence in analyzing featured trading indicators, other trading tools, webinars and other educational materials to determine if they represent suitable and useable features and capabilities for the individual trader.
Pine Script™ indicator
by Saleh_Toodarvari
31