Keltner Channel with Forecast It is recommended to use the 15-minute chart along with Heikin Ashi candles. The two blue lines represent the 15-minute Keltner Channel, while the green lines represent the 1-hour Keltner Channel. This setup provides a clearer view of both short-term and longer-term market trends, helping traders make more informed decisions based on the combined insights from the 15-minute and 1-hour timeframes.
The entire code aims to display market dynamics on the chart based on two indicators: the Keltner Channel and volume. This allows traders to identify potential reversal points (when the price touches the Keltner bands) and areas where there is increased market activity (changes in volume). With this information, traders can make more informed decisions about opening or closing positions.
The code generates forecasts based on the touches of the bands, and the yellow line acts as an additional volume indicator, suggesting important market changes.
Kc
Expanded Keltner Channel with Forecast The entire code aims to display market dynamics on the chart based on two indicators: the Keltner Channel and volume. This allows traders to identify potential reversal points (when the price touches the Keltner bands) and areas where there is increased market activity (changes in volume). With this information, traders can make more informed decisions about opening or closing positions.
The code generates forecasts based on the touches of the bands, and the yellow line acts as an additional volume indicator, suggesting important market changes.
DB MACD TTM SQZ HistogramDB MACD TTM SQZ Histogram
What does the indicator do?
The DB MACD TTM SQZ Histogram combines the MACD with the TTM Squeeze into a single histogram. Traders may use the "Multiplier" settings to weight MACD vs. TTM SQZ. The MACD will default have a multiplier value of 2 vs. 1 for TTM SQZ. The reasoning behind the default 2:1 multiplier is to allow the faster MACD to have a strong hand in the histogram. In addition to the histogram, the indicator will display a red dot when a BB/KC squeeze (TTM SQZ) is present. The TTM SQZ uses a length of 20, BB m-factor of 2, and KC m-factor of 1.5 to match the "Mastering the Trade" squeeze. The histogram is calculated by taking the MACD histogram and the TTM SQZ histogram and first standardizing them into reasonable decimal percentages. Once standardized, each decimal percentage is then multiplied by the individual multiplier. Finally, the two values are summed into the combined histogram value. The end result is a standardized weighted combination of the MACD (faster) with the TTM SQZ (slower) histogram.
How should this indicator be used?
The DB ETHUSD MMA Indicator should be combined with other indicators as a secondary visual indicator or market buy/sell periods. The indicator is not meant to replace the MACD or TTM SQZ. Analyzing the MACD and TTM SQZ wave patterns individually is extremely useful. The indicator allows the trader to quickly obtain a combined analysis of the two indicators with a predetermined preference (multiplier) towards one vs. the other.
In other words, the indicator is very helpful when the MACD and TTM SQZ are conflicting in providing market direction. Those familiar with MACD or TTM SQZ histograms recognize there are four periods in the full cycle; growing below zero line, growing above zero line, falling above zero line, and falling below zero line. Typically a trader would look for buying opportunities when the cycle is showing "growing below zero line." and sell when the price reaches the "falling above zero line." The qualification of the wave pattern of the four periods must be reviewed before trades. If the wave is choppy, then alternative timeframes should be reviewed. Think of wake on a lake or ocean waves. Choppy is unpredictable but smooth waves are more predictable.
The red dot on the zero line would indicate that a squeeze is present in the current timeframe, building pressure. The red dot does not indicate a pressure release of up or down. Instead, it simply means the spring is being compressed. When a squeeze is present, pressure builds and may release in either direction. You can combine this indicator with BB and KC on the plot with BB (20 len, 2 m-factor) and KC (20 len, 1.5 m-factor). You can review the BB/KC outer bands to see possible breakout resistance or support when a squeeze is on. If the price is outside the BB/KC outer banks, move to a higher timeframe.
Does the indicator include any alerts?
Not Yet. Perhaps in the Future (If Desired)
Enjoy!
4EMA+KC+BB+DC by MontyI combined these scripts for my friend.
This script contains some imported work from @PatekCharts and I added the KC channels.
It's not that difficult.
[kai]Keltner&BolingerIt is an indicator that simultaneously displays the Bollinger Bands (BB) and Keltner Channel (KC) calculated for the log scale.
* If you need the normal scale version, please turn off the log mode in the settings.
I think the usage is the same as normal BB and KC.
From here, it ’s an original way of thinking.
I thought about countermeasures for the phenomenon that the BB contracts (squeezes) and breaks, but for some reason it suddenly reverses and breaks greatly in the opposite direction or ends in misfire.
The main part of this Inge is KC, and I think that the range within KC is the range.
Considering that the bar broke above and below the range of KC and broke, the trend market started.
BB fits in KC and judges that the trend is game over
If it is within KC, it is contrarian at the upper and lower limits of KC.
If it breaks, Trend following
Profit if BB fits in KC
I'm thinking about how to use it
ログスケール用にログ計算したボリンジャーバンド（BB）とケルトナーチャンネル（KC）を同時に表示するインジケーターです
※通常スケール版が必要な時は設定のlog modeをOFFにしてください
使い方は普通のBBとKCとおなじで使用方法で良いと思います
ここからはオリジナルな使い方の考え方です
BBが収縮（スクイーズ）してブレイクしたのに何故か突然反転して反対の方に大きくブレイクしたり、不発に終わったりする現象の対策を考えました
このインジのメインはKCでKCの範囲内はレンジと考えます
KCの範囲外にバーが上抜け、下抜けして、ブレイクしたと考え、トレンド相場スタートとします
BBがKCの中に納まってトレンド終了と判定します
KC内の場合はKCの上限、下限で逆張り
ブレイクした場合は順張り
BBがKCの中に納まったら利確
という感じの使い方を考えています
Keltner Worm ForecastBeta V0.1.0
This Keltner Channel Worm gives 6 different KCs at max, and allows you to set a multiplier for the offset and worm settings (exponential).
The idea behind this script is that the overall brightness of the Keltner Channel will indicate the strength of the forecast. If the candles are shrouded by darkness, a correction is due.
Enjoy and let me know if you have any suggestions for improvements down below!
<3 Happy Trading
Sir Poggy
Keltner Channels times 4!Have you always wanted the ultimate MOMO buying script? Well here you go, KC stacked on top of one another.
As Trump would say,
ENJOY!
BB & KCThis script is a mix of both the default Bollinger Bands and the default Keltner Channels.
It helps in identifying the squeeze of the bands and also the consolidation of the price movement.
Squeeze CMF IndicatorI changed the indicator code of Lazybear to replace the linreg with the Chaikin money flow. I recommend using a Macd because the chaikin money flow can give false signals, like any other indicator.
KCWThis TA is called Keltner Channel Width(KCW). It consists of a black line measuring the percentage difference between the upper and the lower channel and a blue line which is the 20-sma of KCW. Based on true range, KCW can be interpreted in two ways: (1) falling width reflects decreasing volatility and (2) rising width reflects increasing volatility.
KCW is a powerful weapon for identifying The Squeeze. This occurs when volatility falls to a very low level, as evidenced by decresing value (negative crossover). After a Squeeze, might be a positive crossover, it signals the start of a new move. A new advance starts with a Squeeze and subsequent break above the upper channel. A new decline starts with a Squeeze and subsequent break below the lower channel.
Done for today. Look forward to your comments and most importantly, your subscription.
Lonelygrass
KC%KThis TA is created with reference to the idea of Bollinger Bands % B, as known as "Keltner Channel % K" ,just saying.
With length of 20 and true length of 2.5, it looks to cover majority of stock price movements. For reversion to mean traders, this would suit them best because of its visual representation. 0.5 indicates mid band, 1 indicates price going outside of the upper band, and 0 means a breach of lower band.
Hope you would find it useful.
Lonelygrass
UCS_Value BandsThis Indicator is yet another variation of KC. Inspired from Value Charts webinar. I have seen their videos on youtube. What appears to be a variation of KC.
They use 12 bands Showing the zone, and different MA for different timeframes.
You can get this indicator close to accuracy by changing the inputs (ATR) and (Deviations)
This also can be used with the triple ATR setup - Change the values to EMA to desired value. To obtain the First band to plot @ 1, Change the Band deviation to 0.25.
Also can be used as as the Acceleration Band. With Current Settings, the Third Band will plot the Acceleration band.
List of All my Indicators - www.tradingview.com
Lycka Till
