Get started

M-oscillator

Volume Based Buy/SellThis is my very first scrip on this platform. It's the first version of the script, It works on the volume-based moving averages and exponential moving average. I have added the buy/sell signals for educational purposes only. While adding the buy/sell signal I have an additional check on the strength of the trend to reduce loss to a minimum. How to use: 1. Use with Heikin Ashi Chart. 2. Use 15 Min timeframe for intraday. Some improvements I am working in the near future is: 1. Exit tread with the maximum profit. 2. Reduce down false trad to 0%. To encourage and support please like the script try using for your own paper trading. Dont forget to leave a comment on if you see any improvement in the script or any idea you have. Happy treading together.
Pine Script® strategy
by Dipak_Patil_
4
Combo Backtest 123 Reversal & Elder Ray (Bear Power) This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy Developed by Dr Alexander Elder, the Elder-ray indicator measures buying and selling pressure in the market. The Elder-ray is often used as part of the Triple Screen trading system but may also be used on its own. Dr Elder uses a 13-day exponential moving average (EMA) to indicate the market consensus of value. Bull Power measures the ability of buyers to drive prices above the consensus of value. Bear Power reflects the ability of sellers to drive prices below the average consensus of value. Bull Power is calculated by subtracting the 13-day EMA from the day's High. Bear power subtracts the 13-day EMA from the day's Low. You can use in the xPrice any series: Open, High, Low, Close, HL2, HLC3, OHLC4 and ect... WARNING: - For purpose educate only - This script to change bars colors.
Pine Script® strategy
by HPotter
4
Master Trend StrategyStrategy for the Master Trend indicator. The screen shows a strategy with a deposit of 100 USD. By default, the strategy is STOP TREND. You can setup the strategy to MAIN TREND, if check off "Use stop" and "Use take 1 amount". Default strategy set stop by market when price reached first take and close by revert signal. MAIN TREND strategy trade from signal to signal use deep first take. Adjusting the settings you can create you own strategy. This strategy has slippage equal 20 and commission 0.02% like on most of exchanges. Can I get access? Use the link below to obtain access to this indicator.
Pine Script® strategy
by master-trend
1
KD compare strategy (交易策略對照組)This is a base and easy trading strategy for comparing my other strategy. The strategy consider K >= 80 is strong target in the last high period, and consider K <=20 is the weak target in the last low period. In the strong target, the strategy may increase long at the first day when K < 50, until 2/3 max order limitation or strong target become to weak. In the weak target, the strategy may increase short at the first day when K > 50, until 2/3 max order limitation or strong target become to strong. there are three orders for this strategy. when the strong become to weak, it may use the remain 1/3 to save itself, and change the direction at the next k > 50 when the weak become to weak, it may use the remain 1/3 to save itself, and change the direction at the next k < 50 這是一個簡單的雙向交易策略，用來對照我其他的策略。 當 K>=80 它會認為目前是強勢股，偏多操作 當 K<=20 它會認為目前是強勢股，偏空操作 當標的為強勢股時，當第一次 K<50 會加碼多單，最多買進2/3的持股，直到轉弱 當標的為弱勢股時，當第一次 K>50 會加碼空單，最多買進2/3的持股，直到轉強 當強勢轉弱勢時，會使用剩下的1/3來拯救持股，在下次 k > 50 出清持股 當弱勢轉強勢時，會使用剩下的1/3來拯救持股，在下次 k < 50 出清持股
Pine Script® strategy
by Tonyder
Strategy Tester EMA-SMA-RSI-MACDOn Tradingview I never saw a custom adjustable strategy script yet, so this is it, you can change different things and see if you'll get a good strategy or not Settings: First choose the source, you can choose out of: close, open, high, low, ohlc4, hlc3, hl2 Then choose you strategy: Long & Short, Long only or Short only Next, choose your entry "Buy/Long" (which is the "close Short position" when "Short"): - (E)MA 1 > (E)MA 2 (Each can be made ema or sma) - close above (E)MA 1 - RSI strategy - macd > signal - macd > 0 - signal > 0 Then choose your RSI values if needed (for example you want a trigger when EMA 1 > SMA 2 but only if RSI > 60, then change "IF RSI >" from 0 to 60 Next you can choose an extra argument and even a second argument with Higher Time Frame settings Under this you can change your (E)MA values as desired (HTF values, MACD and RSI length can be found lower) All the same with the exit/close (or if "Short", this is your entry) Again, change everything as you wish Then comes the RSI length setting, MACD settings and HTF settings, followed by SL/TP settings (you also can enable/disable SL/TP), and TIME settings (for example you want to know the profit only from this year) Alerts are provided in next script Have fun!
Pine Script® strategy
by fikira
40
OathOath consists of 21 and 55 EMA , Commodity Channel Index and Supertrend indicator. It confirms a trend and gives you a signal on a pullback. Original creation worked on 1h EURUSD chart. Oath is merely a rebrand of my previous Patient Trendfollower strategy. Unlike Patient Trendfollower, Oath has actually a good name and it does not fill your screen with noodles. ►Long setup: • 21 EMA is above 55 EMA , which is above the Supertrend indicator. • Commodity Channel Index is an oscillator, which prints into the chart if extreme levels are reached. Green is for a level above 100 or below -100, red is above 140 or below -140 and black is above 180 or below -180. • If 21 EMA > 55EMA > Supertrend and an oversold signal appear, you can buy into the trend. • When backtesting on 1h EURUSD , profit target 400 pips worked best with a stop-loss below Supertrend's bottom and the size of your spread. Spread values do not subtract from your profit. • A picture shows two valid entries. Further examples can be found in Patient Trendfollower 's description. Thanks to: • @everget for providing Supertrend solution. • Satik FX who hand-tested the system by hand and reported results in this article. He is my main inspiration for creating the complete indicator as one because I want to be able to show and hide it with a single click.
Pine Script® strategy
by OrcChieftain
8
Strategy BTBTBTBT — strategy for only long positional trading of top cryptocurrencies. BTCUSD and ETHUSD are best suited for this strategy. The main idea of ​​the strategy is to buy cryptocurrency with a leverage of up to 1: 3 when the market is growing, and get rid of cryptocurrency when the market is not growing or falling. The strategy is working on a daily timeframe . To determine the trend, the strategy uses a combination of indicators MA25 and MA99. To determine overbought (pump) and oversold (dump), the strategy uses the oscillator "SPPO". The strategy has three trading conditions: 1) SPPO SPPOoverBought - "pump" market. Close all long positions or leave a position with a micro-leverage of 1: 0.1 for a period of 28 days. 3) Closing> MA25 > MA99 - uptrend in the market. We open the "long" position with a leverage of 1: 3. If market conditions do not meet the above criteria, then the strategy does not have open positions. Input parameters Recommended timeframe D1. FastLength - period for fast MA. Default = 25. SlowLength - period of slow MA. Default = 99. SPPOoverSold - trigger for determining the dump in the market. Default = -30. SPPOoverBought - trigger to determine the pump in the market. Default = 35. SPPOmaxForLong - the maximum value of SPPO for opening a long position. Default = 10. LeverageLong - leverage when entering the market with a "long" signal. Default = 3. LeveragePamp - the amount of leverage when entering the market with a "pump" signal. Default = 0.1. LeverageDamp - the amount of leverage when entering the market with a "dump" signal. Default = 1. Log equity chart - If true, use a logarithmic scale for a graph of equity. Default = false.
Pine Script® strategy
by Elrid
Super Z strategy - Thanks to Rafael Zioni//Original script //https://www.tradingview.com/script/wYknDlLx-super-Z/ This is a test for verifying if this interesting study works well. The author, thanks to him!!!, advise a possible repaint because the script uses security function. Refer to tradingview.com for more info on repainting: www.tradingview.com QUOTE: We can see repainting in the following cases: 1- Strategies using calc_on_every_tick=true. A strategy with parameter calc_on_every_tick = false may also be prone to repainting, but to a lesser degree. (this is not the case, ndr). 2- Using security for requesting data from a resolution higher than the resolution of the chart’s main symbol (i.e. do not use ion weelky chart if you set 1440 (1Day) in inputs) NOTE: Thanks again to Rafael Zioni. If he requires to delete this strategy, I'll do immediately.
Pine Script® strategy
by 03.freeman
44
Combo Backtest 123 Reversal & Elder Ray (Bear Power) This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy Developed by Dr Alexander Elder, the Elder-ray indicator measures buying and selling pressure in the market. The Elder-ray is often used as part of the Triple Screen trading system but may also be used on its own. Dr Elder uses a 13-day exponential moving average (EMA) to indicate the market consensus of value. Bear Power measures the ability of sellers to drive prices below the consensus of value. Bear Power reflects the ability of sellers to drive prices below the average consensus of value. Bull Power is calculated by subtracting the 13-day EMA from the day's High. Bear power subtracts the 13-day EMA from the day's Low. You can use in the xPrice any series: Open, High, Low, Close, HL2, HLC3, OHLC4 and ect... WARNING: - For purpose educate only - This script to change bars colors.
Pine Script® strategy
by HPotter
Armi Goldman V1.7 CopernicusScript uses an EMA (Exponential Moving Average) as an indicator. When the price crosses (breakout/breakdown) the EMA, the trigger is activated. Script does the breakout and breakdown calculations. It considers one candle close above or below the EMA. It is used only in trending markets like bullish trends and/or bearish trends and never in flat. It can get very bad results so pay attention! Feel free to test it and add comments. I am open to answer any questions. I would like to know what you think and how can we improve this strategy. Thank you & enjoy!
Pine Script® strategy
by armigoldman
ALLinBull&Bear v9.0 STRATEGYEach of my Allin Custom Indicators combined, ads to your understanding where the Market could go next. Each of them have their own purpose and set of rules. You will weight gathered information to get a better understanding of when to ENTER or EXIT a position (SHORT or LONG). 
First you need to find the right Indicator Settings and the best preforming TimeFrame for chosen crypto or fiat pair. You will do that with a "STRATEGY" Indicator. I chose either 3min TF for highly liquid assets or 15min TF for assets of low liquidity but you can choose whatever you want to up to 30min TF. 

 Do not stop until you find 80% or more Precent Profitable result (test different setting on different TF for best results) in Strategy Tester. You can backtest your Strategy with different settings and in different TimeFames to find the very best results for that pair. 
 BACKTESTING past results does not guarantee your future results. BACKTESTING is used to fine-tune your indicator. 
Example: with a guitar tuner (Strategy Tester in our case) you fine-tune your guitar (our Indicators in our case) so you know what tone the guitar will produce when you hit a certain note ("in-tuned" visual interpretation of the Market in our case). It is normal to get a 100% Precent Profitable result from backtesting with very little Drawdown. More than 80% and low drawdown usually means Indicators is "in-tune". CUSTOM INDICATOR TYPE: STRATEGY 
 SETUP There are five different settings. To use them efficiently you need to understand what is their purpose and meaning.  "2nd", "3rd" and "4th" FIELD All of my custom indicators use data from 4 different TimeFrames. First TimeFrame is the one you picked in TradingView. Now you need to set up the other three TimeFrames. To do that you need to click on the "Settings" icon on this indicator and change the "2nd", "3rd" and "4th" field. The preferred setting I use to start searching for the best performing set of Settings is 2-8-32 OR 3-9-27 OR 4-16-64 OR 5-20-80. Those numbers are multiplication of chosen TimeFrame. 
Example: setting 2-8-32 on a 5-minute TimeFrame means it will gather data from 5min TF, 10min TF (5minX2), 40min TF (5minX8) and 160min TF (5minX32). Smoother FIELD This Field is used to average down all that data indicator it is gathering from the price chart. I use integers like for example 9, 18, 27, and any number in between. It is connected to volatility. High Volatility needs Low Number and vice versa. Threshold FIELD This Field is used to cancel down all the mini signal confirmations that are false due to an insignificant influence on future price movements. This number is usually best at 21. When you set all other Fields and get satisfying results you can still try and fine-tune it even more and get even better results. HOW TO USE IT First, you have to choose your TimeFrame. I choose either 3min TF for highly liquid assets and 15min TF for assets of low liquidity but you can choose whatever you want to up to 30min TF. Example: if you chose 30min TimeFrame and you fill the "4th" Field with the number "80", one of observed TF by the indicator will be "30minX80" or "2400min" or "40h" TimeFrame, so it is HUGE. It always depends based on the nature of the actual pair you are looking at. If it is very volatile with a lot of volume, the market beat for this pair settings is very different from another pair with for example very little volume and low volatility. So you need to find the right Indicator Settings at the right TimeFrame for each pair you are following. You are basically tuning your Indicator like you would tune your guitar so you know what to expect before hitting those "strings" of yours. 
Find the best performing setting and TimeFrame with help from a TradingView feature called "Strategy Tester". Get familiar with this feature. But rule of thumb is: everything more than 80% Precent Profitable result with Max Drawdown (negative yield from the worst closed position) lower or similar to AvgTrade is considered good enough tuning of my Indicators.  
You need to reevaluate your best setting whenever your last trade gets a negative result or something big (whale manipulation) happens on the market. You need to re-tune your Indicator so it will be in tune with the Market again. Check and try to find better performing (better Precent Profitable result, lower Drawdown) settings periodically every few days to find your best yielding results.
 
 CUSTOM INDICATOR: BULL&BEAR HOW TO READ IT WHITE WAVY LINE AND TWO HORIZONTAL WHITE LINES  With this one just follow the existing rules when exiting an oversold or overbought area as in RSI,CCI or SRSI indicator. When combining with the signal colored lines in the background it then makes better sense if it is a false signal and it will turn back or it is the right signal and it will exit the oversold or overbought area and advance in that direction. IN THE BACKGROUND: NINE COLORED LINES Rule of thumb here is the more GREEN LINES you see the more LONG/BUY the Signal is and vice versa. It helps to look at those lines a few hours back to get the "feel" where the market is pushing the price. First (1), second (2) and seventh (7) line are the most important lines and they have to be aligned and prevailed in the same color to get a viable signal but it still needs to be confirmed with other Signals.  
Before making any decisions based on visualisation you should refresh the page. Indicator is very data sensitive and needs that very last data for the most accurate visual representation of the Market. 

Pine Script® strategy
by igorbanker
ALLinOscillator v3.0 STRATEGYEach of my Allin Custom Indicators combined, ads to your understanding where the Market could go next. Each of them have their own purpose and set of rules. You will weight gathered information to get a better understanding of when to ENTER or EXIT a position (SHORT or LONG). 
First you need to find the right Indicator Settings and the best preforming TimeFrame for chosen crypto or fiat pair. You will do that with a "STRATEGY" Indicator. I chose either 3min TF for highly liquid assets or 15min TF for assets of low liquidity but you can choose whatever you want to up to 30min TF. 

 Do not stop until you find 80% or more Precent Profitable result (test different setting on different TF for best results) in Strategy Tester. You can backtest your Strategy with different settings and in different TimeFames to find the very best results for that pair. 
 BACKTESTING past results does not guarantee your future results. BACKTESTING is used to fine-tune your indicator. 
Example: with a guitar tuner (Strategy Tester in our case) you fine-tune your guitar (our Indicators in our case) so you know what tone the guitar will produce when you hit a certain note ("in-tuned" visual interpretation of the Market in our case). It is normal to get a 100% Precent Profitable result from backtesting with very little Drawdown. More than 80% and low drawdown usually means Indicators is "in-tune". CUSTOM INDICATOR TYPE: STRATEGY 
 SETUP There are five different settings. To use them efficiently you need to understand what is their purpose and meaning. 
 "2nd", "3rd" and "4th" FIELD All of my custom indicators use data from 4 different TimeFrames. First TimeFrame is the one you picked in TradingView. Now you need to set up the other three TimeFrames. To do that you need to click on the "Settings" icon on this indicator and change the "2nd", "3rd" and "4th" field. The preferred setting I use to start searching for the best performing set of Settings is 2-8-32 OR 3-9-27 OR 4-16-64 OR 5-20-80. Those numbers are multiplication of chosen TimeFrame. 
Example: setting 2-8-32 on a 5-minute TimeFrame means it will gather data from 5min TF, 10min TF (5minX2), 40min TF (5minX8) and 160min TF (5minX32). Smoother FIELD This Field is used to average down all that data indicator it is gathering from the price chart. I use integers like for example 9, 18, 27, and any number in between. It is connected to volatility. High Volatility needs Low Number and vice versa. Threshold FIELD This Field is used to cancel down all the mini signal confirmations that are false due to an insignificant influence on future price movements. This number is usually best at 21. When you set all other Fields and get satisfying results you can still try and fine-tune it even more and get even better results. HOW TO USE IT First, you have to choose your TimeFrame. I choose either 3min TF for highly liquid assets and 15min TF for assets of low liquidity but you can choose whatever you want to up to 30min TF. Example: if you chose 30min TimeFrame and you fill the "4th" Field with the number "80", one of observed TF by the indicator will be "30minX80" or "2400min" or "40h" TimeFrame, so it is HUGE. It always depends based on the nature of the actual pair you are looking at. If it is very volatile with a lot of volume, the market beat for this pair settings is very different from another pair with for example very little volume and low volatility. So you need to find the right Indicator Settings at the right TimeFrame for each pair you are following. You are basically tuning your Indicator like you would tune your guitar so you know what to expect before hitting those "strings" of yours. 
Find the best performing setting and TimeFrame with help from a TradingView feature called "Strategy Tester". Get familiar with this feature. But rule of thumb is: everything more than 80% Precent Profitable result with Max Drawdown (negative yield from the worst closed position) lower or similar to AvgTrade is considered good enough tuning of my Indicators.  
You need to reevaluate your best setting whenever your last trade gets a negative result or something big (whale manipulation) happens on the market. You need to re-tune your Indicator so it will be in tune with the Market again. Check and try to find better performing (better Precent Profitable result, lower Drawdown) settings periodically every few days to find your best yielding results.
 CUSTOM INDICATOR: OSCILLATOR 
 HOW TO READ IT GREEN AREA on the bottom and RED AREA on top are just like the oversold or overbought areas in RSI, CCI or SRSI and uses the same principle.  Example: when a WHITE wave line crosses-UP WHITE horizontal line in GREEN area it means that it is a LONG/BUY signal/confirmation. It needs to be confirmed with other confirmation signals in that same Indicator on in a "BULL&BEAR" Indicator to get better understanding that the price would not turn back down due to a false price move in UPWARDS direction. GREEN or RED OSCILLATOR WAVE AREAS indicates the direction price is going and how strong the "force" behind the price move is.  Example: if WHITE LINE is over the RED/GREEN LINE the area turns GREEN and it is a LONG/BUY signal. When a shadow color is on the OTHER SIDE that means it is an added confirmation for a LONG/BUY position. When a SHADOW AREA is over the GREEN AREA and turns RED it usually means there are still forces pulling the price down. Before making any decisions based on visualisation you should refresh the page. Indicator is very data sensitive and needs that very last data for the most accurate visual representation of the Market. 

Pine Script® strategy
by igorbanker
Strategy - Stochastic Crosses in Trending MarketThis strategy is based on Stochastic Crosses happening in the Oversold/Overbought area, taken into account the current trend which is determined by an EMA pair. (Only Longs in uptrend / only Shorts in downtrend) - Long position is closed when Stochastic is entering Overbought area - Short position is closed when Stochastic is entering Overbought area Additionally a logic is implemented to close the position when another (subsequent) Buy or Sell Signal is given after the trend has changed (to avoid fake outs) - EMA and Stochastic settings can be changed in the settings - Take Profit / Stop Loss can be dynamically activated in the settings (by defaults only Take Profit is activated) - Short Position trading can be excluded in the settings (for people trading on platforms without the possibility to open Short Positions) - Strategy time frame can be entered in the settings Default setup seems to work well for BTC on 4HR timeframe. Good luck! As this is my first strategy, I am very happy for constructive feedback on how to improve this.
Pine Script® strategy
by wugamlo
17
Crypto Scalper Pro=========== Crypto Scalper Pro Strategy =========== Crypto Scalper Pro is a scalping strategy developed to work alongside our Crypto Tipster Strategy, now you can trade the D markets with our Tipster, and Intra-Day markets with our Scalper! This strategy works very well on shorter time frames across multiple crypto pairs, everything from 4H all the way down to a 5m chart, our Crypto Scalper will find the best Entry and Exit points for consistent and reliable returns. We've added a few variables for you to play with to fine tune this scalper to suit your chosen trading plan - however, these will only adjust the strategy to a certain degree, as there are many algorithms and indicators doing their thing hidden in the background that take precedence. Check out the Crypto Scalper Pro Alert Indicator to automate this strategy! ----------- What's Included? Crypto Scalper Pro comes with a host of features and is being continually updated, these features include (but are not limited to): - Date Range Settings Setting custom Start/End dates can help hone your strategy to suit the current times, or get a general overview of the market over the years. - Heikin Ashi Confirmation We added HA confirmation for both Entry & Exit of trades. This started as a form of "Safe Mode", we have since adapted our safe mode far beyond Heikin Ashi; but kept this confirmation as an added extra. - Variable Indicator Settings As well as our Fixed Indicators and Price Action analysis going on in the background of the strategy, we've also included some Variable Indicators that you have access to edit. Lookback Period will help establish how far back you'd want to be confirming price indications on the strategy - the higher the number the further back it will look, making the Scalping Strategy appear smoother with less trades during choppy times, the downside with a higher lookback is you might miss the start of a potentially epic trade, and only be shown an Entry after the event has already happened. We find Lookback Lengths of between 5 and 100 could work depending on various other settings, the market being traded, and the timeframe being used. MA Length (Length of Moving Average) - We use a few MA's to best determine various factors involved with successfully scalping a market, overall trend direction, current price movements and fake-out detection to name just a few. You've got the option of determining a good average length for a few of these variables. Again, a short MA Length will catch every big move right at the start, but you're almost guaranteed a Negative Expected Value with that method, due to the vast quantity of losing trades in times of chop/ranging markets. A Higher MA Length will remove a lot of chop, reduce the quantity of trades, and therefore (should) result in a higher Percent of Trades Profitable; it will however add a certain lag to the strategy, meaning those highly profitable trades we're looking for may turn out to be not so highly profitable! - Safe Mode Enabling Safe Mode will add a couple more confirmation indicators to the strategy - the aim of Safe Mode is, in essence, to remove any trading signals that would end of being false/bad moves. Usually resulting in less Overall Trades, a higher Net Profit, higher % Profitable, higher Profit Factor AND a lower Drawdown. Use Safe Mode to help eliminate orders that would otherwise be placed in choppy markets. - Stop Loss/Take Profit Settings This is where Crypto Scalper Pro really proves itself, Money Management. We have an editable Fixed SL/TP, as well as Trailing Stops for Long or Short orders, all of which you can use on their own, or combined with each other. Playing with these settings can turn an un-profitable system into a very-profitable trading plan! ----------- For more information and a FREE 7-Day Trial with the Crypto Scalper Pro Strategy visit the link in our signature. Good Luck and Happy Trading!
Pine Script® strategy
by theCrypster
9