Get started

Volume Indicator

Rolling Net VolumeMay still make changes, the current study should be helpful as is. Looking to highlight potential relative trend exhaustion in net volume. Should be most effective for stable supply assets. We're looking at an 100 day moving average of net volume essentially. The values of the RNV are slightly exaggerated to help with visibility PLEASE bear this in mind. Never the less, you can look at many commodities and notice moderate and extreme trend exhaustion on the positive and negative side using the transparent bands above and below. The less transparent red band perhaps suggests an opportunity to open a position against the current direction. It's not perfect, I may try to improve it. I am definitely open to feedback and appreciate it very much in advance.
Pine Script™ indicator
by SeanBronato
2
Attributable VolumeA volume indicator which calculates "Attributable Volume”, the portion of volume which contributed to the direction in which the candle moved. Attributable Volume is calculated as: Total volume excluding the "counter wick" volume. Where for a green (up) candle, the "counter wick" volume is the top wick volume. In theory, Attributable Volume should better represent the effort of directional thrust of each candle. By default, this indicator displays “Attributable RVOL”, but can be set to: Attributable RVOL RVOL Attributable Volume Volume Note: RVOL = Relative Volume, the current volume divided by the Volume moving average. RVOL can be used to identify major moves, and potential starts/ends to trends.
Pine Script™ indicator
by capriole_charles
11
Candle VolumeScript Based on Volume Based Coloured Bars by KivancOzbilgic ///////////// This indicator turns the candle into a volume-weighted signal, When the price falls, the candle is red, and when the price rises, the candle is green. In addition, we each have two colors Happening: Dark red: It is dark red when the downtrend trading volume is greater than 200% of its average price (default 20 days), which indicates that our price action is supported by strong bearish trading volume Red: When the price drops and the trading volume is between 50% and 200% of its average (default 20 days), in this case, we can think that the trading volume is neither strong nor weak Light red: When the price drops and VOLUME is less than 50% of its average price (default 20 days), the trading volume is weak and there is not much support for price movements Dark green: When the price rises and the trading volume is greater than 200% of its average price (default 20 days), it indicates that our price movement is supported by a strong bullish trading volume Green: When the price rises and the trading volume is between 50% and 200% of its average price (the default is 20 days), in this case, we can think that the trading volume is neither strong nor weak Light green: When the price rises and the trading volume is less than 50% of its average price (default 20 days), the trading volume is weak and does not support the price trend well Default Low Volume is 50% (0.5) and High 200% (2), but if those values don't suit you, you can change them according to your trading personality ////////////////////////// Esse é um indicador que colore a candlera de acordo com o volume baseado na média, quando o volume está acima da média a candlera fica verde, e quando está abaixo, a candlera fica vermelha, e as cores das candleras funcionam dessa forma : Vermelho escuro: fica vermelho escuro quando o preço cai e o volume de negociação é superior a 200% do preço médio (padrão 20 dias), o que indica que nossa ação de preço é suportada por um forte volume de negociação de baixa Vermelho: quando o preço cai e o volume de negociação está entre 50% e 200% de sua média (padrão de 20 dias), nesse caso, podemos pensar que o volume de negociação não é forte nem fraco Vermelho claro: quando o preço cai e VOLUME é inferior a 50% do preço médio (padrão 20 dias), o volume de negociação é fraco e não há muito suporte para movimentos de preço Verde escuro: quando o preço aumenta e o volume de negociação é superior a 200% do preço médio (padrão 20 dias), isso indica que nosso movimento de preço é suportado por um forte volume de negociação de alta Verde: quando o preço aumenta e o volume de negociação está entre 50% e 200% do preço médio (o padrão é 20 dias), nesse caso, podemos pensar que o volume de negociação não é forte nem fraco Verde claro: quando o preço aumenta e o volume de negociação é inferior a 50% do preço médio (padrão 20 dias), o volume de negociação é fraco e não suporta bem a tendência de preço O volume baixo padrão é 50% (0,5) e alto 200% (2), mas se esses valores não forem adequados para você, você poderá alterá-los de acordo com sua personalidade de trading
Pine Script™ indicator
by Marqx
4
Relative Volume Strength IndexRVSI is an alternative volume-based indicator that measures the rate of change of average OBV. How to read a chart using it? First signal to buy is when you see RVSI is close to green oversold levels. Once RVSI passes above it's orange EMA, that would be the second alert of accumulation. Be always cautious when it reaches 50 level as a random statistical correction can be expected because of "market noises". You know it's a serious uptrend when it reaches above 75 and fluctuates there, grading behind EMA. The best signal to sell would be a situation where you see RVSI passing below it's EMA when the whole thing is close to Red overbought level It looks simple, but it's powerful! I'd use RVSI in combination with price-based indicators.
Pine Script™ indicator
by fract
43
RedK_Supply/Demand Volume Viewer v1Background ============ VolumeViewer is a volume indicator, that offers a simple way to estimate the movement and balance (or lack of) of supply & demand volume based on the shape of the price bar. i put this together few years ago and i have a version of this published for another platform under different names (Directional Volume, BetterVolume) in case you come across them what is V.Viewer ===================== The idea here is to find a "simple proxy" for estimating the demand or supply portions of a volume bar - these 2 forces have the potential to affect the current price trend so we want an easy way to track them - or to understand if a stock is in accumulation or distribution - we want to do this without having access to Level II or bid/ask data, and without having to get into the complexity of exploring the lower timeframe price & volume data - to achieve that, we depend on a simple assumption, that the volume associated with an up move is "demand" and the volume associated with a down move is "Supply". so we basically extrapolate these supply and demand values based on how the bar looks like - a full "green" price bar / candle will be considered 100% demand, and a full "red" price bar will be considered 100% supply - a bar that opens and closes at the same level will be 50/50 split between supply & demand. - you may say this is a "too simple" of an assumption to make, but believe me, it works :) at least at the basic scenario we need here: i'm just exploring the volume movement and finding key levels - and it provides a good improvement compared to the classic way we see volume on a chart - which is still available here in VolumeViewer. in all cases, i consider this to be work in progress, so i'd welcome any ideas to improve (without getting too complicated) - there's already a host of great volume-based indicators that will do the multi timeframe drill down, but that's not my scope here. Technical Jargon & calculation =========================== 1. first we calculate a score % for the volume portion that is considered demand based on the bar shape skip this part if it sounds too technical => if you're into coding indicators, you would probably know there are couple of different concepts for that algorithm - for example, the one used in Balance Of Power formula - which i'm a big fan of - but the one i use here is different. (how?) this is my own, ant it simply applies double weight for the "wick" parts of a price bar compared to the "body of the bar" -- i did some side-by-side comparison in past and decided this one works better. you can change it in the code if you like 2. after calculating the Bull vs Bears portion of volume, we take a moving average of both for the length you set, to come up with what we consider to be the Demand vs Supply - as usual, i use a weighted moving average (WMA) here. 3. the balance or net volume between these 2 lines is calculated, then we apply a final smoothing and that's the main plot we will get 4. being a very visual person, i did my best to build up the visuals in the correct order - then also to ensure the "study title" bar is properly organized and is simple and useful (Full Volume, Supply, Demand, Net Volume). - i wish there was a way in Pine to hide a value that i still need to visually plot but don't want it showing its value on the study title bar, but couldn't find it. so the last plot value is repeated twice. How to use =========== - V.Viewer is set up to show the simplified view by default for simplicity. so when you first add it to a chart, you will get only the supply vs demand view you can see in the middle pane in the above chart - Optional / detailed mode: go into the settings, and expose all other plots, you will be able to add the classic volume histogram, and the Supply / Demand lines - note these 2 lines will be overlay-ed on top of each other - this provides an easy way to see who is in control - especially if you change the display of these 2 lines into "area" style. This is what is showing in the lower pane in the above chart. ** Exploring Key Price Levels - the premise is, at spots where there's big lack of balance, that's where to expect to find key price levels (support / resistance) and these price levels will come into play in future so can be used to set entry / exit targets for our trades - see the example in the AAPL chart where you can easily locate these "balance or reversal levels" using the tops/bottoms/zero-crossings from the Net Volume line ** Use for longer-term Price Analysis - we can also use this simple indicator to gain more insights (at a high level) of the price in terms of accumulation vs distribution and if the sellers or buyers are in control - for example, in the above AAPL chart, V.Viewer tells us that buyers have been in control since October 19 - even during the recent drop, demand continued to be in play - compare that to DIS chart below for the same period, where it shows that the market was dumping DIS thru the weakness. DIS was bleeding red most of the time Final thoughts ============= - V.Viewer is an attempt to enhance the way we see and use Volume by leveraging the shape of the price bar to estimate volume supply & demand - and the Net between the 2 - it will work for stocks and other instruments as long as there's volume data - note that V.Viewer does not track trend. each bar is taken in isolation of prior bars - the price may be going down and V.Viewer is showing supply going up (absorption scenario?) - so i suggest you do not use it to make decisions without consulting other trend / momentum indicators - of course this is a possible improvement idea, or can be implemented in another indicator, add in trend somehow, or maybe think of making this a +100 / -100 Oscillator .. feel free to play with these thoughts - all thoughts welcome - if this is useful to you in your trading, please share with other trades here to learn from each other - the code is commented - please feel free to use it as you like, or build things on top of it - but please continue to credit the author of this code :) good luck! -
Editors' picks
Pine Script™ indicator
by RedKTrader
41
Negative Volume Disparity IndicatorThe Negative Volume Disparity Indicator was created by Phillip C. Holt (Stocks & Commodities V. 14:6 (265-269)). This converts the classic Negative Volume indicator into Bollinger Bands and calculates the percentage of where the value lies within the Bollinger Bands. Buy when the nvdi rises above its signal line and sell when it falls below the signal line. The OBVDI was a special request so I figured I would add this one as well. Let me know what other indicators you would like me to write scripts for!
Pine Script™ indicator
by cheatcountry
On Balance Volume Disparity IndicatorThe On Balance Volume Disparity Indicator was created by Phillip C. Holt (Stocks & Commodities V. 14:6 (265-269)). This converts the classic OBV indicator into Bollinger Bands and calculates the percentage of where the value lies within the Bollinger Bands. Buy when the obvdi rises above its signal line and sell when it falls below the signal line. This was a special request so let me know what other indicators you would like me to write scripts for!
Pine Script™ indicator
by cheatcountry
7
On Balance Volume ReflexThe On Balance Volume Reflex Indicator was developed by Fred Purifoy (Stocks & Commodities V 6:4 142-144) and it is similar in calculation to the On Balance Volume indicator but uses a lookback period for the change comparisons. Buy when the OVR is above the signal and sell when it falls below the signal. I have included my On Balance Volume Modified Indicator to highlight the differences between both indicators. Let me know if you would like to see me write scripts for more indicators!
Pine Script™ indicator
by cheatcountry
3
Delta Volume Columns Pro [LucF]█  OVERVIEW This indicator displays volume​​ delta information calculated with intrabar inspection on historical bars, and feed updates when running in realtime. It is designed to run in a pane and can display either stacked buy/sell volume​ columns or a signal line which can be calculated and displayed in many different ways. Five different models are offered to reveal different characteristics of the calculated volume​ delta information. Many options are offered to visualize the calculations, giving you much leeway in morphing the indicator's visuals to suit your needs. If you value delta volume​ information, I hope you will find the time required to master Delta Volume​ Columns Pro well worth the investment. I am confident that if you combine a proper understanding of the indicator's information with an intimate knowledge of the volume​ idiosyncrasies on the markets you trade, you can extract useful market intelligence using this tool. █  WARNINGS 1. The indicator only works on markets where volume​ information is available,   Please validate that your symbol's feed carries volume​ information before asking me why the indicator doesn't plot values. 2. When you refresh your chart or re-execute the script on the chart, the indicator will repaint because elapsed realtime bars will then recalculate as historical bars. 3. Because the indicator uses different modes of calculation on historical and realtime bars, it's critical that you understand the differences between them. Details are provided further down. 4. Calculations using intrabar inspection on historical bars can only be done from some chart timeframes. See further down for a list of supported timeframes.   If the chart's timeframe is not supported, no historical volume​ delta will display. █  CONCEPTS Chart bars Three different types of bars are used in charts:  1. Historical bars are bars that have already closed when the script executes on them.  2. The realtime bar is the current, incomplete bar where a script is running on an open market. There is only one active realtime bar on your chart at any given time.    The realtime bar is where alerts trigger.  3. Elapsed realtime bars are bars that were calculated when they were realtime bars but have since closed.    When a script re-executes on a chart because the browser tab is refreshed or some of its inputs are changed, elapsed realtime bars are recalculated as historical bars. Why does this indicator use two modes of calculation? Historical bars on TradingView charts contain OHLCV data only, which is insufficient to calculate volume​ delta on them with any level of precision. To mine more detailed information from those bars we look at intrabars , i.e., bars from a smaller timeframe (we call it the intrabar timeframe ) that are contained in one chart bar. If your chart Is running at 1D on a 24x7 market for example, most 1D chart bars will contain 24 underlying 1H bars in their dilation. On historical bars, this indicator looks at those intrabars to amass volume​ delta information. If the intrabar is up, its volume​ goes in the Buy bin, and inversely for the Sell bin. When price does not move on an intrabar, the polarity of the last known movement is used to determine in which bin its volume​ goes. In realtime, we have access to price and volume​ change for each update of the chart. Because a 1D chart bar can be updated tens of thousands of times during the day, volume​ delta calculations on those updates is much more precise. This precision, however, comes at a price:  — The script must be running on the chart for it to keep calculating in realtime.  — If you refresh your chart you will lose all accumulated realtime calculations on elapsed realtime bars, and the realtime bar.   Elapsed realtime bars will recalculate as historical bars, i.e., using intrabar inspection, and the realtime bar's calculations will reset.   When the script recalculates elapsed realtime bars as historical bars, the values on those bars will change, which means the script repaints in those conditions.  — When the indicator first calculates on a chart containing an incomplete realtime bar, it will count ALL the existing volume​ on the bar as Buy or Sell volume​,   depending on the polarity of the bar at that point. This will skew calculations for that first bar. Scripts have no access to the history of a realtime bar's previous updates,   and intrabar inspection cannot be used on realtime bars, so this is the only to go about this.  — Even if alerts only trigger upon confirmation of their conditions after the realtime bar closes, they are repainting alerts   because they would perhaps not have calculated the same way using intrabar inspection.  — On markets like stocks that often have different EOD​ and intraday feeds and volume​ information,   the volume's scale may not be the same for the realtime bar if your chart is at 1D, for example,   and the indicator is using an intraday timeframe to calculate on historical bars.  — Any chart timeframe can be used in realtime mode, but plots that include moving averages in their calculations may require many elapsed realtime bars before they can calculate.   You might prefer drastically reducing the periods of the moving averages, or using the volume​ columns mode, which displays instant values, instead of the line. Volume Delta Balances This indicator uses a variety of methods to evaluate five volume​ delta balances and derive other values from those balances. The five balances are: 1 — On Bar Balance : This is the only balance using instant values; it is simply the subtraction of the Sell volume​ from the Buy volume​ on the bar. 2 — Average Balance : Calculates a distinct EMA for both the Buy and Sell volumes, and subtracts the Sell EMA from the Buy EMA. 3 — Momentum Balance : Starts by calculating, separately for both Buy and Sell volumes, the difference between the same EMAs used in "Average Balance" and   an SMA of double the period used for the "Average Balance" EMAs. The difference for the Sell side is subtracted from the difference for the Buy side,   and an RSI of that value is calculated and brought over the −50/+50 scale. 4 — Relative Balance : The reference values used in the calculation are the Buy and Sell EMAs used in the "Average Balance".   From those, we calculate two intermediate values using how much the instant Buy and Sell volumes on the bar exceed their respective EMA — but with a twist.   If the bar's Buy volume​ does not exceed the EMA of Buy volume​, a zero value is used. The same goes for the Sell volume​ with the EMA of Sell volume​.   Once we have our two intermediate values for the Buy and Sell volumes exceeding their respective MA, we subtract them. The final "Relative Balance" value is an ALMA of that subtraction.   The rationale behind using zero values when the bar's Buy/Sell volume​ does not exceed its EMA is to only take into account the more significant volume​.   If both instant volume​ values exceed their MA, then the difference between the two is the signal's value.   The signal is called "relative" because the intermediate values are the difference between the instant Buy/Sell volumes and their respective MA.   This balance flatlines when the bar's Buy/Sell volumes do not exceed their EMAs, which makes it useful to spot areas where trader interest dwindles, such as consolidations.   The smaller the period of the final value's ALMA, the more easily you will see the balance flatline. These flat zones should be considered no-trade zones. 5 — Percent Balance : This balance is the ALMA of the ratio of the "On Bar Balance" value, i.e., the volume​ delta balance on the bar (which can be positive or negative),   over the total volume for that bar. From the balances and marker conditions, two more values are calculated: 1 — Marker Bias : It sums the up/down (+1/‒1) occurrences of the markers 1 to 4 over a period you define, so it ranges from −4 to +4, times the period.   Its calculation will depend on the modes used to calculate markers 3 and 4. 2 — Combined Balances : This is the sum of the bull/bear (+1/−1) states of each of the five balances, so it ranges from −5 to +5. █  FEATURES The indicator has two main modes of operation: Columns and Line . Columns • In Columns mode you can display stacked Buy/Sell volume​ columns. • The buy section always appears above the centerline, the sell section below. • The top and bottom sections can be colored independently using eight different methods. • The EMAs of the Buy/Sell values can be displayed (these are the same EMAs used to calculate the "Average Balance"). Line • Displays one of seven signals: the five balances or one of two complementary values, i.e., the "Marker Bias" or the "Combined Balances". • You can color the line and its fill using independent calculation modes to pack more information in the display.  You can thus appraise the state of 3 different values using the line itself, its color and the color of its fill. • A "Divergence Levels" feature will use the line to automatically draw expanding levels on divergence events. Default settings Using the indicator's default settings, this is the information displayed: • The line is calculated on the "Average Balance". • The line's color is determined by the bull/bear state of the "Percent Balance". • The line's fill gradient is determined by the advances/declines of the "Momentum Balance". • The orange divergence dots are calculated using discrepancies between the polarity of the "On Bar Balance" and the chart's bar. • The divergence levels are determined using the line's level when a divergence occurs. • The background's fill gradient is calculated on advances/declines of the "Marker Bias". • The chart bars are colored using advances/declines of the "Relative Balance". Divergences are shown in orange. • The intrabar timeframe is automatically determined from the chart's timeframe so that a minimum of 50 intrabars are used to calculate volume​ delta on historical bars. Alerts The configuration of the marker conditions explained further is what determines the conditions that will trigger alerts created from this script. Note that simply selecting the display of markers does not create alerts. To create an alert on this script, you must use ALT-A from the chart. You can create multiple alerts triggering on different conditions from this same script; simply configure the markers so they define the trigger conditions for each alert before creating the alert. The configuration of the script's inputs is saved with the alert, so from then on you can change them without affecting the alert. Alert messages will mention the marker(s) that triggered the specific alert event. Keep in mind, when creating alerts on small chart timeframes, that discrepancies between alert triggers and markers displayed on your chart are to be expected. This is because the alert and your chart are running two distinct instances of the indicator on different servers and different feeds. Also keep in mind that while alerts only trigger on confirmed conditions, they are calculated using realtime calculation mode, which entails that if you refresh your chart and elapsed realtime bars recalculate as historical bars using intrabar inspection, markers will not appear in the same places they appeared in realtime. So it's important to understand that even though the alert conditions are confirmed when they trigger, these alerts will repaint. Let's go through the sections of the script's inputs. Columns The size of the Buy/Sell columns always represents their respective importance on the bar, but the coloring mode for tops and bottoms is independent. The default setup uses a standard coloring mode where the Buy/Sell columns are always in the bull/bear color with a higher intensity for the winning side. Seven other coloring modes allow you to pack more information in the columns. When choosing to color the top columns using a bull/bear gradient on "Average Balance", for example, you will have bull/bear colored tops. In order for the color of the bottom columns to continue to show the instant bar balance, you can then choose the "On Bar Balance — Dual Solid Colors" coloring mode to make those bars the color of the winning side for that bar. You can display the averages of the Buy and Sell columns. If you do, its coloring is controlled through the "Line" and "Line fill" sections below. Line and Line fill You can select the calculation mode and the thickness of the line, and independent calculations to determine the line's color and fill. Zero Line The zero line can display dots when all five balances are bull/bear. Divergences You first select the detection mode. Divergences occur whenever the up/down direction of the signal does not match the up/down polarity of the bar. Divergences are used in three components of the indicator's visuals: the orange dot, colored chart bars, and to calculate the divergence levels on the line. The divergence levels are dynamic levels that automatically build from the line's values on divergence events. On consecutive divergences, the levels will expand, creating a channel. This implementation of the divergence levels corresponds to my view that divergences indicate anomalies, hesitations, points of uncertainty if you will. It precludes any attempt to identify a directional bias to divergences. Accordingly, the levels merely take note of divergence events and mark those points in time with levels. Traders then have a reference point from which they can evaluate further movement. The bull/bear/neutral colors used to plot the levels are also congruent with this view in that they are determined by the line's position relative to the levels, which is how I think divergences can be put to the most effective use. One of the coloring modes for the line's fill uses advances/declines in the line after divergence events. Background The background can show a bull/bear gradient on six different calculations. As with other gradients, you can adjust its brightness to make its importance proportional to how you use it in your analysis. Chart bars Chart bars can be colored using seven different methods. You have the option of emptying the body of bars where volume​ does not increase, as does my TLD indicator, and you can choose whether you want to show divergences. Intrabar Timeframe This is the intrabar timeframe that will be used to calculate volume​ delta using intrabar inspection on historical bars. You can choose between four modes. The three "Auto-steps" modes calculate, from the chart's timeframe, the intrabar timeframe where the said number of intrabars will make up the dilation of chart bars. Adjustments are made for non-24x7 markets. "Fixed" mode allows you to select the intrabar timeframe you want. Checking the "Show TF" box will display in the lower-right corner the intrabar timeframe used at any given moment. The proper selection of the intrabar timeframe is important. It must achieve maximal granularity to produce precise results while not unduly slowing down calculations, or worse, causing runtime errors. Note that historical depth will vary with the intrabar timeframe. The smaller the timeframe, the shallower historical plots you will be. Markers Markers appear when the required condition has been confirmed on a closed bar. The configuration of the markers when you create an alert is what determines when the alert will trigger. Five markers are available: • Balances Agreement : All five balances are either bullish​ or bearish​. • Double Bumps : A double bump is two consecutive up/down bars with +/‒ volume​​ delta, and rising Buy/Sell volume​ above its average. • Divergence confirmations : A divergence is confirmed up/down when the chosen balance is up/down on the previous bar when that bar was down/up, and this bar is up/down. • Balance Shifts : These are bull/bear transitions of the selected signal. • Marker Bias Shifts : Marker bias shifts occur when it crosses into bull/bear territory. Periods Allows control over the periods of the different moving averages used to calculate the balances. Volume​ Discrepancies Stock exchanges do not report the same volume​ for intraday and daily (or higher) resolutions. Other variations in how volume​ information is reported can also occur in other markets, namely Forex, where volume​ irregularities can even occur between different intraday timeframes. This will cause discrepancies between the total volume​ on the bar at the chart's timeframe, and the total volume​​ calculated by adding the volume​​ of the intrabars in that bar's dilation. This does not necessarily invalidate the volume​​ delta information calculated from intrabars, but it tells us that we are using partial volume​ data. A mechanism to detect chart vs intrabar timeframe volume​​ discrepancies is provided. It allows you to define a threshold percentage above which the background will indicate a difference has been detected. Other Settings You can control here the display of the gray dot reminder on realtime bars, and the display of error messages if you are using a chart timeframe that is not greater than the fixed intrabar timeframe, when you use that mode. Disabling the message can be useful if you only use realtime mode at chart timeframes that do not support intrabar inspection. █  RAMBLINGS On Volume​ Delta Volume​ is arguably the best complement to interpret price action, and I consider volume​ delta to be the most effective way of processing volume​ information. In periods of low-volatility price consolidations, volume​ will typically also be lower than normal, but slight imbalances in the trend of the buy/sell volume​ balance can sometimes help put early odds on the direction of the break from consolidation. Additionally, the progression of the volume​ imbalance can help determine the proximity of the breakout. I also find volume​ delta and the number of divergences very useful to evaluate the strength of trends. In trends, I am looking for "slow and steady", i.e., relatively low volatility​ and pauses where price action doesn't look like world affairs are being reassessed. In my personal mythology, this type of trend is often more resilient than high-volatility breakouts, especially when volume​ balance confirms the general agreement of traders signaled by the low-volatility usually accompanying this type of trend. The volume​ action on pauses will often help me decide between aggressively taking profits, tightening a stop or going for a longer-term movement. As for reversals, they generally occur in high-volatility areas where entering trades is more expensive and riskier. While the identification of counter-trend reversals fascinates many traders to no end, they represent poor opportunities in my view. Volume​ imbalances often precede reversals, but I prefer to use volume​ delta information to identify the areas following reversals where I can confirm them and make relatively low-cost entries with better odds. On "Buy/Sell" Volume Buying or selling volume​ are misnomers, as every unit of volume​ transacted is both bought and sold by two different traders. While this does not keep me from using the terms, there is no such thing as “buy only” or “sell only” volume​. Trader lingo is riddled with peculiarities. Divergences The divergence detection method used here relies on a difference between the direction of a signal and the polarity (up/down) of a chart bar. When using the default "On Bar Balance" to detect divergences, however, only the bar's volume​ delta is used. You may wonder how there can be divergences between buying/selling volume​ information and price movement on one bar. This will sometimes be due to the calculation's shortcomings, but divergences may also occur in instances where because of order book structure, it takes less volume​ to increase the price of an asset than it takes to decrease it. As usual, divergences are points of interest because they reveal imbalances, which may or may not become turning points. To your pattern-hungry brain, the divergences displayed by this indicator will — as they do on other indicators — appear to often indicate turnarounds. My opinion is that reality is generally quite sobering and I have no reliable information that would tend to prove otherwise. Exercise caution when using them. Consequently, I do not share the overwhelming enthusiasm of traders in identifying bullish​/bearish​ divergences. For me, the best course of action when a divergence occurs is to wait and see what happens from there. That is the rationale underlying how my divergence levels work; they take note of a signal's level when a divergence occurs, and it's the signal's behavior from that point on that determines if the post-divergence action is bullish​/bearish​. Superfluity In "The Bed of Procrustes", Nassim Nicholas Taleb writes: To bankrupt a fool, give him information . This indicator can display lots of information. While learning to use a new indicator inevitably requires an adaptation period where we put it through its paces and try out all its options, once you have become used to it and decide to adopt it, rigorously eliminate the components you don't use and configure the remaining ones so their visual prominence reflects their relative importance in your analysis. I tried to provide flexible options for traders to control this indicator's visuals for that exact reason — not for window dressing. █  LIMITATIONS • This script uses a special characteristic of the `security()` function allowing the inspection of intrabars — which is not officially supported by TradingView.  It has the advantage of permitting a more robust calculation of volume​ delta than other methods on historical bars, but also has its limits. • Intrabar inspection only works on some chart timeframes: 3, 5, 10, 15 and 30 minutes, 1, 2, 3, 4, 6, and 12 hours, 1 day, 1 week and 1 month.  The script’s code can be modified to run on other resolutions. • When the difference between the chart’s timeframe and the intrabar timeframe is too great, runtime errors will occur. The Auto-Steps selection mechanisms should avoid this. • All volume​ is not created equally. Its source, components, quality and reliability will vary considerably with sectors and instruments.  The higher the quality, the more reliably volume​ delta information can be used to guide your decisions.  You should make it your responsibility to understand the volume​ information provided in the data feeds you use. It will help you make the most of volume​ delta. █  NOTES For traders • The Data Window shows key values for the indicator. • While this indicator displays some of the same information calculated in my Delta Volume Columns ,  I have elected to make it a separate publication so that traders continue to have a simpler alternative available to them. Both code bases will continue to evolve separately. • All gradients used in this indicator determine their brightness intensities using advances/declines in the signal—not their relative position in a pre-determined scale. • Volume​ delta being relative, by nature, it is particularly well-suited to Forex markets, as it filters out quite elegantly the cyclical volume​ data characterizing the sector. If you are interested in volume​ delta, consider having a look at my other "Delta Volume" indicators: • Delta Volume Realtime Action displays realtime volume​ delta and tick information on the chart. • Delta Volume Candles builds volume​​ delta candles on the chart. • Delta Volume Columns is a simpler version of this indicator. For coders • I use the `f_c_gradientRelativePro()` from the PineCoders Color Gradient Framework to build my gradients.  This function has the advantage of allowing begin/end colors for both the bull and bear colors. It also allows us to define the number of steps allowed for each gradient.  I use this to modulate the gradients so they perform optimally on the combination of the signal used to calculate advances/declines,  but also the nature of the visual component the gradient applies to. I use fewer steps for choppy signals and when the gradient is used on discrete visual components  such as volume​ columns or chart bars. • I use the PineCoders Coding Conventions for Pine to write my scripts. • I used functions modified from the PineCoders MTF Selection Framework for the selection of timeframes. █  THANKS TO: — The devs from TradingView's Pine and other teams, and the PineCoders who collaborate with them. They are doing amazing work,  and much of what this indicator does could not be done without their recent improvements to Pine. — A guy called Kuan who commented on a Backtest Rookies presentation of their Volume Profile indicator using a `for` loop.  This indicator started from the intrabar inspection technique illustrated in Kuan's snippet. — theheirophant , my partner in the exploration of the sometimes weird abysses of `security()`’s behavior at intrabar timeframes. — midtownsk8rguy , my brilliant companion in mining the depths of Pine graphics.
Pine Script™ indicator
by LucF
121
On Balance Volume ModifiedHere is a smoothed version of the classic OBV indicator with a signal line. You can use it to look for signal line crossovers and divergences. The signal line is a 10-day EMA of the OBVM line. Typically, the signal line can vary from 10 to 50. This was just published by Vitali Apirine in the latest issue of Stocks & Commodities (April 2020) p22-25 Please let me know if you want me to publish any other indicators or if you have any questions!
Pine Script™ indicator
by cheatcountry
5
On Balance Volume with CrossOBV indicator with a few key changes that can turn it into a filter or trading indicator as-is. Volume calculation given a look-back to help clarify trends without smoothing lag Change the source (HLC3 indicates a little faster in backtesting) Smooth the signal if desired Moving average (MA) added for crossover indication in trend change MA can be either EMA or HMA** ** My personal use: EMA for trend filtering trades: Trade long signals if OBV is above the MA, trade short signals if OBV is below the MA. HMA for scalping and chop: Normally set the HMA to 20 or 15 and trade the crosses. Works on most time frames and generates a lot of noise. 5 min and 15 min seems best for me in day trading Example of trend trading using only the OBV-C and no other indicators, stops, or trailing stops: This could obviously be improved using stops, trailing stops, or other indicators to filter when to enter & exit trades or mitigate loss. Example of trading using the HMA and lower time frames with Elder's Force Index (EFI) used as a filter. Trade with both cross at or very near the same time. Winning trades in green:
Pine Script™ indicator
by fauxlife
3
[fikira] Volume + MTF MAVolume normally has 1 Moving Average (standard orange coloured) This script gives 1 extra Moving Average (default blue coloured) BOTH MA can be shown with Multi Time Frames, based on the most excellent work of "PineCoders" (MTF Selection Framework functions)! This can provide more insights, also the crossovers can be interesting! So, default there are 2 MA's of the present Time Frame + extra 2 TF's of these MA's (default 2 and 4 times of the present TF) All can be enabled/disabled, Only 1 MA: With labels and values: Here 2 MA but + only 1 extra TF:
Pine Script™ indicator
by fikira
2
OBV Traffic LightsThe idea with On-balance volume (OBV) is to see price movement based on volume instead of the distance between the open and close of a candle. This can be used to find the relationship between volume and price action much easier than normal volume bars. This version spices the OBV up a bit by basing it off of the current and previous close of the Heikin Ashi of the current bar, as well as adding "traffic light" moving averages to the mix to get a better grasp of trends and when volume has shifted direction as well as by how much. Thanks to Peter Whipp for the original idea of using the OBV with traffic light moving averages, as well as the default settings for them.
Editors' picks
Pine Script™ indicator
by lejmer
23
Volume Profile [Makit0]VOLUME PROFILE INDICATOR v0.5 beta Volume Profile is suitable for day and swing trading on stock and futures markets, is a volume based indicator that gives you 6 key values for each session: POC, VAH, VAL, profile HIGH, LOW and MID levels. This project was born on the idea of plotting the RTH sessions Value Areas for /ES in an automated way, but you can select between 3 different sessions: RTH, GLOBEX and FULL sessions. Some basic concepts: - Volume Profile calculates the total volume for the session at each price level and give us market generated information about what price and range of prices are the most traded (where the value is) - Value Area (VA): range of prices where 70% of the session volume is traded - Value Area High (VAH): highest price within VA - Value Area Low (VAL): lowest price within VA - Point of Control (POC): the most traded price of the session (with the most volume) - Session HIGH, LOW and MID levels are also important There are a huge amount of things to know of Market Profile and Auction Theory like types of days, types of openings, relationships between value areas and openings... for those interested Jim Dalton's work is the way to come I'm in my 2nd trading year and my goal for this year is learning to daytrade the futures markets thru the lens of Market Profile For info on Volume Profile: TV Volume Profile wiki page at www.tradingview.com For info on Market Profile and Market Auction Theory: Jim Dalton's book Mind over markets (this is a MUST) BE AWARE: this indicator is based on the current chart's time interval and it only plots on 1, 2, 3, 5, 10, 15 and 30 minutes charts. This is the correlation table TV uses in the Volume Profile Session Volume indicator (from the wiki above) Chart Indicator 1 - 5 1 6 - 15 5 16 - 30 10 31 - 60 15 61 - 120 30 121 - 1D 60 This indicator doesn't follow that correlation, it doesn't get the volume data from a lower timeframe, it gets the data from the current chart resolution. FEATURES - 6 key values for each session: POC (solid yellow), VAH (solid red), VAL (solid green), profile HIGH (dashed silver), LOW (dashed silver) and MID (dotted silver) levels - 3 sessions to choose for: RTH, GLOBEX and FULL - select the numbers of sessions to plot by adding 12 hours periods back in time - show/hide POC - show/hide VAH & VAL - show/hide session HIGH, LOW & MID levels - highlight the periods of time out of the session (silver) - extend the plotted lines all the way to the right, be careful this can turn the chart unreadable if there are a lot of sessions and lines plotted SETTINGS - Session: select between RTH (8:30 to 15:15 CT), GLOBEX (17:00 to 8:30 CT) and FULL (17:00 to 15:15 CT) sessions. RTH by default - Last 12 hour periods to show: select the deph of the study by adding periods, for example, 60 periods are 30 natural days and around 22 trading days. 1 period by default - Show POC (Point of Control): show/hide POC line. true by default - Show VA (Value Area High & Low): show/hide VAH & VAL lines. true by default - Show Range (Session High, Low & Mid): show/hide session HIGH, LOW & MID lines. true by default - Highlight out of session: show/hide a silver shadow over the non session periods. true by default - Extension: Extend all the plotted lines to the right. false by default HOW TO SETUP BE AWARE THIS INDICATOR PLOTS ONLY IN THE FOLLOWING CHART RESOLUTIONS: 1, 2, 3, 5, 10, 15 AND 30 MINUTES CHARTS. YOU MUST SELECT ONE OF THIS RESOLUTIONS TO THE INDICATOR BE ABLE TO PLOT - By default this indicator plots all the levels for the last RTH session within the last 12 hours, if there is no plot try to adjust the 12 hours periods until the seesion and the periods match - For Globex/Full sessions just select what you want from the dropdown menu and adjust the periods to plot the values - Show or hide the levels you want with the 3 groups: POC line, VA lines and Session Range lines - The highlight and extension options are for a better visibility of the levels as POC or VAH/VAL THANKS TO @watsonexchange for all the help, ideas and insights on this and the last two indicators (Market Delta & Market Internals) I'm working on my way to a 'clean chart' but for me it's not an easy path @PineCoders for all the amazing stuff they do and all the help and tools they provide, in special the Script-Stopwatch at that was key in lowering this indicator's execution time All the TV and Pine community, open source and shared knowledge are indeed the best way to help each other IF YOU REALLY LIKE THIS WORK, please send me a comment or a private message and TELL ME WHAT you trade, HOW you trade it and your FAVOURITE SETUP for pulling out money from the market in a consistent basis, I'm learning to trade (this is my 2nd year) and I need all the help I can get GOOD LUCK AND HAPPY TRADING
Editors' picks
Pine Script™ indicator
by makit0
65